HYCO W573 Smart Watch User Manual
- June 5, 2024
- hyco
Table of Contents
HYCO W573 Smart Watch
Disclaimer
Disclaimer @2018 Shanghai Hyco Genyong Technology Co., Ltd. All rights
reserved.
Please read through the manual carefully before using the product and operate
it according to the manual. It is advised that you should keep this manual for
future reference.
Do not disassemble the device or remove the seal label from the device.
Otherwise, Shanghai Hyco Genyong Technology Co., Ltd. does not assume
responsibility for the warranty or replacement.
All pictures in this manual are for reference only and actual product may
differ. Regarding to the product modification and update, Shanghai Hyco
Genyong Technology Co., Ltd. reserves the right to make changes to any
software or product to improve reliability, function, or design at any time
without notice. Besides, the information contained herein is subject to change
without prior notice.
The products depicted in this manual may include software copyrighted by
Shanghai Hyco Genyong Technology Co., Ltd. or a third party. The user,
corporation or individual, shall not duplicate, in whole or in part,
distribute, modify, decompile, disassemble, decode, reverse engineer, rent,
transfer or sublicense such software without prior written consent from the
copyright holders.
This manual is copyrighted. No part of this publication may be reproduced or
used in any form without written permission from Hyco.
Please visit www.hycoiot.com or check the latest
version of the specification sheet for the latest product information
Design
Components
| Components | Quantity | Usage |
|---|---|---|
| Smart Watch | 1 | Receive with display scanning data, export to backend server |
| Adapter | 1 | Charging adapter to connect with power |
| USB Cable | 1 | Connect watch with adapter |
| Battery | 2 | Battery supply for watch |
| Battery charger | 1 | Charging battery |
| Certificate | 1 | Factory certification |
| Manual | 1 | Device description and usage |
Specifications
| Model | W573 |
|---|---|
| Weight | 245g |
| Dimensions (WDH) | 96.5mm87.4mm26mm (without watch strap) |
| Display | 3.5-inch screen with resolution of 320480/640960 (optional) |
| CPU | Quad 2.0GHz Cortex-A53+Quad 1.5GHz Cortex-A53 |
| Storage | 64GB Flash ROM and 4GB RAM |
| Operation System | Android 9.0 |
| --- | --- |
| Function Keys | F1-F10 customizable shortcut keys |
| Touching Panel | Capacitive touching panel |
| Camera | 8MP HD camera |
| Audio Output | Speaker, bluetooth headset |
| Audio Input | Highly sensitive waterproofing MIC |
| Communication | WiFi/4G (optional) |
| Bluetooth | BT4.1+HS, compliant V3.0+HS and V2.1+EDR. |
| USB | USB2.0 |
| Battery(Swappable) | 3600mAh @3.8V |
| GPS | GPS/Galileo/Glonass |
| Battery Life | 15 hours |
| Wearing | On wrist/arm |
| IP Level | IP66 |
| Operating Temperature | -10℃ to 50℃ (14℉ to 122℉) |
| Humidity | 0%-95%RH (non condensing) |
Functions
Power on/off
Long press the power button on the right side of watch for three seconds.
How to charge
Connect USB cable with adapter and watch, plug the adapter into power port.
Tips: it is recommended to charge watch after watch is switched off.
How to replace the battery
Twist the two battery locks and take the battery out of the watch, replace
it with the replacement battery. 
How to pair with ring scanner
Method 1:
Click the “Ring Connection” icon in the drop-down menu or the “Ring
Connection” app on home page, scan the barcode as closely as possible, when
the ring light turns green, it will automatically jump back to home page and
shows successful connection icon on the top right corner in watch. 
Method 2:
In the Settings, click “Bluetooth”, turn on the Bluetooth, choose the series
number printed on ring to connect, when the ring light turns on green,
Bluetooth is connected successfully.
How to connect with Bluetooth headset?
In the Settings, click “Bluetooth”, turn on the Bluetooth, choose the Bluetooth headset name to connect.
How to synchronize date and time
In the Settings, click the “Date and time” to set and synchronize the date and
time.
How to export the scanning data into the text field in watch?
- APP which is developed by HYCO could receive and display the scanning data from ring directly.
- APP which is not developed by HYCO and the Browser need to open the HID mode in watch. How to open: In the Settings, click “Language and Input”, choose “Google Pinyin IME”to activate HID mode. Scanning data could be exported to any text field in watch after HID activated.
Input method setting
Click “Language and Input”, choose and change the keyboard mode in the current
keyboard list.
How to change on-screen keyboard color?
In the Settings, click the“Language and Input”, then choose the“Keyboard &
Input methods”–“Current Keyboard”–select “Google Pinyin IME”, choose the color
of keyboard font (white, black, blue, yellow, red, green) in the “Google
Pinyin IME” to differentiate the background color of the interface.
How to uninstall the APP
- Press and drag the APP icon to “Recycle Bin” on home page
- In the Settings – choose and click the app you want – click uninstall.
USB debugging setting
Steps:
Click the “Settings”- System-Developer Options-Debugging-USB debugging, click
“confirm” to activate the debugging mode. It is only used when user needs to
develop procedures or install procedures from PC into watch.
How to upgrade system?
Upgrade system online, steps: Settings – about Smart Watch – System Upgrade
-Check Now – Choose new system version to upgrade.
Services
Warranty: one year for smart watch, half year for battery and accessories.
Notice
- The watch window must be kept clean. Improper usage will breach the limited warranty clauses
- Avoid rough objects scratching the window
- Remove stains from window by soft cloth
- Do not spray any liquid onto the window
- Use cleaning water to clean.
HYCO Technology
Website: www.hycoiot.com
Email: global_sales@hycoiot.com
Phone Number: +86 15201965826