Cooper Atkins DFP450W Digital Pocket Test Specifications and Datasheet
- June 14, 2024
- Cooper Atkins
Table of Contents
Cooper Atkins DFP450W Digital Pocket Test
INTRODUCTION
A Digital Pocket Test That Measures Dishwasher Final Rinse Temperature
Temperature truly can make all the difference between success and failure in the world of culinary perfection. When it comes to precision and safety in their cooking procedures, chefs and other food service personnel find that the Cooper Atkins DFP450W Digital Pocket Test is an invaluable resource.
Concerning the Cooper Atkins Brand
As a leading producer and supplier of high-quality time, temperature, and humidity instruments, Cooper Atkins has distinguished itself in the industry. This history is upheld by the DFP450W, which combines original OEM components for the highest levels of performance and dependability. Cooper’s instruments are renowned for their accuracy and are manufactured to exacting standards to guarantee both safety and effectiveness in the intended use. They are also endorsed by OEMs.
- 35 Vantage Point Drive Rochester, NY 14624
- Call 1.800.800.5001
Features
- -40° to 450°F / -40° to 232°C
- Accuracy: ±2F° / ±1C°
- Resolution: 0.1°
- Maximum Temperature Memory -Press the “MAX” button to display the maximum temperature recorded, ideal in areas of extreme temperature like freezers and dishwashers (Unit retains maximum temperature after shut-off)
- Auto Shut-off
- 0.25″ / 6.4 mm High LCD Display
- 5″ / 27 mm Stem Length
- Thermistor Sensor Located in Probe Tip for Quick Response Time and Accurate Readings
- 1.5 Volt Battery
- Lifetime Warranty
The DFP450W was specifically designed for the harshest foodservice environments. Potentially hazardous mercury thermometers are often used to check the extreme temperature and water soluble conditions of commercial dishwater. Eliminate the risk of a mercury spill; the DFP450W maintains the heat and resists the water of Commercial 2-Cycle dishwashers.
Do not be alarmed if the DFP450W display is blacked out when you remove it
from the dishwasher – this is normal. In the dish washing process, high heat
shocks the display but the electronics still record the maximum temperature.
Once cooled, the display
will return to normal. Reset and you are ready for the next cycle.
ON/OFF
Press the “ON/OFF” button to turn the unit on and off. (Unit shuts off after 10 minutes of non-use.)
MAX TEMPERATURE:
- Press the “Max” button to display the maximum temperature recorded.
- To clear “MAX” reading: In “MAX” mode, press and hold the “MAX” button for 3 seconds.
- The unit will return to displaying the current temperature.
FIELD CALIBRATION
- Place finely crushed ice into a container and add enough water to just cover the ice to create a slush mix.
- Immerse the stem at least 1 inch into the slush mix without touching the sides or bottom of the container.
- To prevent accidental recalibration of the unit, the thermometer must register within the temperature ranges 23°F(-5°C) to 41ºF(5°C) to recalibrate the instrument.
- Press and hold the ON/OFF button for 8 seconds to enter calibration mode. ‘CAL’ will be displayed on the upper right corner of the LCD.
- When the display stabilizes, press the “CAL” button until the display reads 32°F(0°C). The unit is now calibrated and ready for use.
TO CLEAN
Remove stubborn grease from stem with scouring pad or fine steel wool.
Bringing you the future in food safety…
Intended Use and OEM Guarantee
Because Cooper Atkins is committed to using OEM parts, its instruments are based in integrity. This means that the DFP450W not only operates safely and dependably, but also meets the standards set by equipment manufacturers. It’s important to remember that the DFP450W is meant to be used for the precise purpose for which it was created, and it is not advised to stray from this application.
67-262
Frequently Asked Questions
What temperature range can the Cooper Atkins DFP450W measure?
The DFP450W can measure temperatures from -40° to 450°F (-40° to 232°C).
How accurate is the DFP450W thermometer?
It has an accuracy of ±2°F (±1°C).
What is the resolution of the DFP450W thermometer?
The resolution of the thermometer is 0.1°.
Does the DFP450W have a feature to recall the maximum temperature?
Yes, by pressing the 'MAX' button, the maximum recorded temperature can be displayed.
Will the DFP450W turn off automatically?
Yes, it has an auto shut-off feature that turns the unit off after 10 minutes of non-use.
How long is the stem on the DFP450W thermometer?
The stem length is 5 inches (127 mm).
Where is the sensor located on the DFP450W?
The thermistor sensor is located in the probe tip for quick response time and accurate readings.
What type of battery does the DFP450W use?
It uses a 1.5 Volt battery.
Does the Cooper Atkins DFP450W come with a warranty?
Yes, it comes with a lifetime warranty.
Is the DFP450W designed to withstand the conditions of a commercial dishwasher?
Yes, it was specifically designed to resist the high temperatures and water of commercial 2-cycle dishwashers.
What should I do if the display of the DFP450W is blacked out after dishwashing?
Do not be alarmed as this is normal. The display is designed to black out due to the high heat but will return to normal once cooled.
How do you recalibrate the DFP450W thermometer?
To recalibrate, immerse the stem in a slush mix of finely crushed ice and water, then press and hold the ON/OFF button for 8 seconds to enter calibration mode, and press the 'CAL' button until the display reads 32°F(0°C).
Download The Pdf Link:Cooper Atkins DFP450W Digital Pocket Test Specifications and Datasheet
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>