GENERATION LIGHTING 7000406 Donovan Ceiling Instruction Manual
- June 13, 2024
- GENERATION LIGHTING
Table of Contents
7000406 Donovan Ceiling
Instruction Manual
7000406 Donovan Ceiling
** Installation Instructions for
Donovan Ceiling
990C7000406-DVN
7000406**
ENERAL RODUCT NFORMATION:
These fixtures are intended to be installed utilizing NEC compliant junction
boxes.
This product is safety listed for damp locations.
Incandescent version may be dimmed with a standard incandescent dimmer.
LED version may be dimmed with a LED dimmer. Consult lamp manufacturer for
additional information.
This instruction shows a typical installation.
CAUTION RISK OF FIRE
This product must be installed in accordance with the applicable installation
code by a person familiar with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
SAVE THESE INSTRUCTIONS!
Install the Fixture
- Secure the mounting plate to the junction box.
- Connect the fixture to a suitable ground in accordance to local electrical codes.
- Connect the white fixture wire to the neutral power line wire with a wire nut.
- Connect the black fixture wire to the hot power line wire with a wire nut.
- Neatly place all the wires into the junction box, place the fixture base onto the mounting plate, and secure it in place with the fixture screws.
- Screw the lamps into the sockets. Refer to the label on the socket for Max Wattage Information.
- Place the shade into the shade base and secure in place with the thumb screws (do not over tighten). Repeat for remaining shades.
7400 Linder Ave., Skokie, IL 60077
T 847.410.4400 | F 847.410.4500
www.generationlighting.com
©2022 Visual Comfort & Co., L.L.C. All rights reserved.
The Visual Comfort & Co. logo is a registered trademark of Visual Comfort &
Co.
Visual Comfort & Co. reserves the right to change specifications
for product improvements without notification.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>