VENCHA 5505081-BK-TC Harrington Wall Light Installation Guide
- June 13, 2024
- VENCHA
Table of Contents
VENCHA 5505081-BK-TC Harrington Wall Light
Product Information
Product Name: Harrington Wall Light
Product Codes:
- 5505081-BK-TC – Harrington Wall Light 36w-BK-TC
- 5505082-BK-TC – Harrington Wall Light 10w-BK-TC
Product Descriptions:
- Harrington Wall Light 36w-BK-TC
- Harrington Wall Light 10w-BK-TC
Contact Information:
- Phone: (02) 8811 1622
- Email: sales@vencha.net.au
- Website: www.vencha.net.au
Product Usage Instructions
Important Safety Issues:
- Please ensure to follow all safety guidelines and precautions provided in the user manual.
Steps for Installation:
- Before installation, make sure to turn off the power supply.
- Choose a suitable location on the wall where you want to install the Harrington Wall Light.
- Use appropriate tools to mark the positions for drilling holes.
- Drill holes according to the marked positions.
- Securely attach the mounting bracket of the Harrington Wall Light to the wall using screws.
- Connect the electrical wires of the Harrington Wall Light to the power supply, following the provided wiring diagram.
- Fix the Harrington Wall Light onto the mounting bracket.
- Turn on the power supply and test the functionality of the Harrington Wall Light.
If you encounter any issues during installation or have any questions, please contact Vencha customer support using the provided contact information.
Dimension
| Code | Description |
|---|---|
| 5505081-BK-TC | Harrington Wall Light 36w-BK-TC |
| 5505082-BK-TC | Harrington Wall Light 10w-BK-TC |
Important Safety Issues
- This product must be installed by a professional, licensed electrician according to AS/NZ 3000.
- Ensure power supply is switched off before installation
- Modifications of this product will void any warranty
- Vencha Lighting does not take responsibility for wrong installation or incorrect use.
Steps for Installation
- Turn off power, make sure circuit is free of voltage.
- Undo screws from fitting, remove base plate from fitting
- Install base plate in desired location using appropriate screws for application
- Connect power cables to terminal inside fitting
- Select colour temperature from switch in base plate
- Reattached fitting to baseplate, tighten screws making sure fitting is secure and tight to avoid water penetration.
- Apply silicon around fitting to avoid water penetration.
- Turn power back on and test fitting operates correctly.
P: (02) 8811 1622
E: sales@vencha.net.au
W : www.vencha.net.au
References
Read User Manual Online (PDF format)
Loading......