VENCHA 5505091-12v-WH-3K Kroll 1 LED Light Installation Guide

VENCHA 5505091-12v-WH-3K Kroll 1 LED Light

Product Information

• Product Name: Kroll 1 LED Light
• Model Variations:
  • 5505091-12v-WH-3K
  • 5505091-12v-WH-5K
  • 5505091-12v-BK-3K
  • 5505091-12v-BK-5K
  • 5505091-240v-WH-3K
  • 5505091-240v-WH-5K
  • 5505091-240v-BK-3K
  • 5505091-240v-BK-5K
• Canister: Included

Important Safety Issues:

• Turn off power and ensure the circuit is free of voltage before installation.

Steps for Installation:

1. Make a hole to fit the selected model.
2. The cut-out dimensions may vary based on the installation method (with or without the canister).
3. The fitting can be installed in the wall, inground, or deck.
4. If installed inground or deck, ensure adequate drainage is provided.
5. Connect the fitting to the appropriate power source (240v or 12v DC depending on the model).
6. If connecting multiple fittings, wire them in parallel.
7. Once connected, insert the fitting into the hole, ensuring it is stable.
8. Finish the installation.
9. Turn on the power and test if the fitting operates correctly.

Contact Information:

• Phone: (02) 8811 1622
• Email: sales@vencha.net.au
• Website: www.vencha.net.au

DIMENSIONS

Important Safety Issues

• This product must be installed by a professional, licensed electrician according to AS/NZ
• Ensure the power supply is switched off before installation
• Modifications of this product will void any warranty
• Vencha Lighting does not take responsibility for wrong installation or incorrect

Steps for Installation

1. Turn off the power, and make sure the circuit is free of

2. Make a hole to suit fitting being Please use the dimensions provided.
   NOTE : Please note cut out will vary depending on the installation method, with or without the canister.

3. The fitting can be installed in the wall, inground or in
   NOTE : Adequate drainage is required if installed inground or deck.

4. Connect fitting to appropriate power source (*240v or 12v DC depending on model)

5. If connecting multiple fittings, wiring must be done in

6. Once the fitting is connected, insert the fitting into the hole, making sure the fitting is

7. Finish installation

8. Turn the power back on and the test fitting operates correctly

CONTACT INFORMATION

• P : (02) 8811 1622
• E : sales@vencha.net.au
• W : www.vencha.net.au

References

• Vencha Lighting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>