VENCHA 5505086-12v-WH-3K Arch LED Step Light White Installation Guide
- June 13, 2024
- VENCHA
Table of Contents
VENCHA 5505086-12v-WH-3K Arch LED Step Light White
Product Information
The Arch Step Light is a versatile lighting fixture available in various models and voltages. It comes in different color options and light temperatures, allowing you to choose the one that suits your needs.
- Model: Arch Step Light
- Voltage Options:
- 12v DC
- 240v AC
- Color Options:
- White (WH)
- Black (BK)
- Light Temperature Options:
- 3K (Warm White)
- 5K (Cool White)
Product Usage Instructions
- Turn off the power and ensure the circuit is free of voltage.
- Make a hole according to the dimensions provided for the specific fitting being installed. Note that the cutout size may vary depending on whether you are using the canister or not.
- Connect the fitting to the appropriate power source based on the model’s voltage (240v AC or 12v DC).
- If you are connecting multiple fittings, make sure to wire them in parallel.
- Once the fitting is connected, insert it into the hole, ensuring that it is stable.
- Complete the installation process.
- Turn the power back on and test if the fitting operates correctly.
SPECIFICATION
Code | Description |
---|---|
5505086-12v-WH-3K | Arch Step Light-12v-WH-3K |
5505086-12v-WH-5K | Arch Step Light-12v-WH-5K |
5505086-12v-BK-3K | Arch Step Light-12v-BK-3K |
5505086-12v-BK-5K | Arch Step Light-12v-BK-5K |
5505086-240v-WH-3K | Arch Step Light-240v-WH-3K |
5505086-240v-WH-5K | Arch Step Light-240v-WH-5K |
5505086-240v-BK-3K | Arch Step Light-240v-BK-3K |
5505086-240v-BK-5K | Arch Step Light-240v-BK-5K |
DIMENSION
WITH CANISTER: Arch 57mm (W) x 60mm (H)
WITHOUT CANISTER: 53mm (W) x 56mm (H)
Important Safety Issues
- This product must be installed by a professional, licensed electrician according to AS/NZ 3000.
- Ensure the power supply is switched off before installation
- Modifications of this product will void any warranty
- Vencha Lighting does not take responsibility for wrong installation or incorrect use.
Steps for Installation
- Turn off the power, and make sure the circuit is free of voltage.
- Make a hole to suit the fitting being installed. Please use the dimensions provided. Please note that cut-out will vary depending on the installation method, with or without canister.
- Connect fitting to appropriate power source (*240v or 12v DC depending on model)
- If connecting multiple fittings, wiring must be done in parallel.
- Once the fitting is connected, insert the fitting into the hole, making sure the fitting is stable.
- Finish installation.
- Turn power back on and test fitting operates correctly.
CONTACT
- P: (02) 8811 1622
- E: sales@vencha.net.au.
- W: www.vencha.net.au.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>