VENCHA 5505085-12v-WH-3K Stan Step Light Instruction Manual

VENCHA 5505085-12v-WH-3K Stan Step Light

Product Information

The Stan Step Light is a versatile lighting fixture available in various models and voltages. It comes in different color options and light temperatures. The dimensions of the light fixture with a canister are 57mm (width) x 60mm (height), and without a canister, the dimensions are 53mm (width) x 56mm (height). The canister itself measures 53mm in diameter.

The product codes and descriptions for the different models are as follows:

• 5505085-12v-WH-3K – Stan Step Light-12v-WH-3K
• 5505085-12v-WH-5K – Stan Step Light-12v-WH-5K
• 5505085-12v-BK-3K – Stan Step Light-12v-BK-3K
• 5505085-12v-BK-5K – Stan Step Light-12v-BK-5K
• 5505085-240v-WH-3K – Stan Step Light-240v-WH-3K
• 5505085-240v-WH-5K – Stan Step Light-240v-WH-5K
• 5505085-240v-BK-3K – Stan Step Light-240v-BK-3K
• 5505085-240v-BK-5K – Stan Step Light-240v-BK-5K

Product Usage Instructions

1. Turn off the power and ensure the circuit is free of voltage.
2. Make a hole of suitable size to accommodate the chosen fitting. Please refer to the provided dimensions for guidance.
3. If using a canister, note that the cut-out size may vary depending on the installation method.
4. Connect the fitting to the appropriate power source (240v or 12v DC, depending on the model).
5. If connecting multiple fittings, ensure wiring is done in parallel.
6. Once the fitting is connected, insert it into the hole, ensuring it is stable.
7. Complete the installation.
8. Turn the power back on and test if the fitting operates correctly.

Contact Information:
For further inquiries or sales, you can contact Vencha at:

• Phone: (02) 8811 1622
• Email: sales@vencha.net.au
• Website: www.vencha.net.au

STAN Step Light Installation Instructions

WITH CANISTER:
57mm (W) x 60mm (H)

WITHOUT CANISTER:
53mm (W) x 56mm (H)

Important Safety Issues:

• This product must be installed by a professional, licensed electrician according to AS/NZ 3000.
• Ensure power supply is switched off before installation
• Modifications of this product will void any warranty
• Vencha Lighting does not take responsibility for wrong installation or incorrect use.

Steps for Installation:

1. Turn off power, make sure circuit is free of voltage.
2. Make a hole to suit fitting being installed. Please use dimensions provided.

• Please note cut out will vary depending on installation method, with or without cannister. 3. Connect fitting to appropriate power source (*240v or 12v DC depending on model) 4. If connecting multiple fittings, wiring must be done in parallel. 5. Once fitting connected, insert fitting into hole, making sure fitting is stable. 6. Finish installation. 7. Turn power back on and test fitting operates correctly.

P: (02) 8811 1622
E: sales@vencha.net.au
W: www.vencha.net.au

References

• Vencha Lighting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>