AMP 75301-01A BedStep Retractable Bumper Step Instruction Manual
- June 13, 2024
- AMP
Table of Contents
AMP 75301-01A BedStep Retractable Bumper Step
Product Information
The product is an AMP BedStep designed for Chevrolet Silverado and GMC Sierra trucks manufactured between 1999 and 2007 (2007 Classic). The part number for this product is 75301-01A. It is a driver-side bumper mount that requires the use of an 18mm torque wrench and an 8mm T-25 wrench. The recommended torque for installation is 33 ft-lbs/44 Nm. The product also comes with PT Screws that need to be inserted into corresponding holes and torqued to 6 ft-lbs / 8 N.m. The step pad surface and linkage arms can be cleaned with mild soap and water.
Product Usage Instructions
- Always use appropriate handholds when stepping up to or down from your truck’s cargo bed.
- Before driving, ensure that the BedStep is stowed in the retracted position.
- To install the BedStep:
- Use an 18mm torque wrench to tighten the PT Screws into corresponding holes.
- Torque the PT Screws to 6 ft-lbs/8 N.m. Note: Overtightening may damage the step pad.
- Use an 8mm T-25 wrench to tighten the screws.
- Torque the screws to 33 ft-lbs/44 Nm.
- Ensure that the product is properly installed.
- To clean the step pad surface and linkage arms:
- Wash with mild soap and water using a soft brush or sponge.
- Rinse with fresh water.
For any warranty issues or further assistance, please contact AMP Research customer service at 1-888-983-2204.
WARNING:
It is crucial to read and precisely follow the provided instructions when
installing this product. Failure to do so could place the vehicle occupants in
a potentially dangerous situation. After installing or reinstalling, re-check
to ensure that the product is properly installed.
What’s In The Box
Tools Required
Installation
OPERATION
- The AMP Research BedStep® is foot-operated and deploys and retracts with a nudge of your foot.
- To deploy, press down using your left foot, on the forward outside corner of the step pad.
- To retract, gently kick the underside of the step pad.
- Max Load Capacity: 300 lbs.
- Always use appropriate handholds when stepping up to or down from your truck’s cargo bed.
MAINTENANCE TIPS
- The step pad surface and linkage arms can be washed with mild soap and water using a soft brush or sponge to dislodge any mud, dirt, or accumulated road grime. Rinse with fresh water.
- To prevent slipping, avoid applying waxes, lubricants, or protectants like Armor All® to the step surface.
ATTENTION!
BEDSTEP SHOULD ALWAYS BE STOWED IN THE RETRACTED POSITION WHEN DRIVING.
LIMITED WARRANTY
- AMP RESEARCH warrants the product to be free from defects in material and workmanship, for terms specified below, provided there has been normal use and proper maintenance. All remedies under this warranty are limited to the repair or replacement of any item found by the factory to be defective within the time period specified.
- If you have a warranty claim, first you must call our factory at the number below for instructions. You must retain proof of purchase and submit a copy with any items returned for warranty work. Upon completion of warranty work, if any, we will return the repaired or replaced item or items to you freight prepaid. Damage to our products caused by accidents, fire, vandalism, negligence, misinstallation, misuse, Acts of God, or by defective parts not manufactured by us, is not covered under this warranty.
- THE WARRANTY TIME PERIOD IS AS FOLLOWS: THREE YEARS FROM THE DATE OF PURCHASE.
- ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE CREATED HEREBY ARE LIMITED IN DURATION TO THE SAME DURATION AND SCOPE AS THE EXPRESS WRITTEN WARRANTY. OUR COMPANY SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGE.
- Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.
FOR WARRANTY ISSUES WITH THIS PRODUCT PLEASE CALL AMP RESEARCH CUSTOMER SERVICE 1-888-983-2204
WARNING
Be sure to read and precisely follow the provided instructions when installing
this product. Failure to do so could place the vehicle occupants in a
potentially dangerous situation. After installing or reinstalling, re-check to
ensure that the product is properly installed.
Contact Information
AMP RESEARCH TECH SUPPORT 1-888-983-2204 (Press 2) Monday – Friday, 7:00 AM – 5:00 PM PST
Designed and manufactured by AMP Research®. Patent Number 6,830,257; 6,641,158; 6,834,875; 6,938,909; 6,942,233; 7,007,961; 7,055,839; 7,163,221; 7,367,574; 7,380,807; 7,398,985; 7,413,204; 7,487,986. Other US and Worldwide patents pending. Made in USA © 2009 AMP Research.
Three-year limited warranty. Professional installation is recommended. www .amp-research.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>