SupaWarm SFH2 Fan Heater Instruction Manual

June 13, 2024
SupaWarm

SupaWarm SFH2 Fan Heater

SupaWarm SFH2 Fan Heater

PARTS IDENTIFICATION

(A) Thermostat
(B) Heat Select Switch
(C) Indicator Light
(D) Handle
(E) Air Outlet Grille

Parts Identification

ELECTRICAL SAFETY

RATING

  • AC 220-240V ~ 50Hz, 2000W.
  • Class of insulation: II [Q]
  • Ensure that the voltage indicated on the identification plate corresponds with the mains voltage.

Please read these instructions fully before use.
THE HEATER MUST BE POSITIONED UPRIGHT.

DISPOSAL

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.

At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service. Disposing of a household appliance separately avoids possible negative consequences for the environment and health, avoiding inappropriate disposal enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out wheeled dustbin.

Disposal

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THE PRODUCT.

When using an electrical appliance, basic safety precautions should always be observed, as explained in this manual.

WARNING: To reduce the risk of fire, electrical shock, or injury to person or property:

  • This heater complies with the relevant safety standards, we recommend that you position the heater at least 750mm (30”) away from any over hanging surfaces.
  • ENSURE that the mains lead cannot be tripped over or pulled such that the heater would tip over.
  • DO NOT insert or allow foreign objects to enter any ventilation or exhaust opening, as this can cause electric shock, fire or damage to the appliance.
  • Leave the air outlet (the front of the heater) at least 1mtr (3,) of free space.
  • DO NOT COVER or obstruct in any way the air outlets over or in front of the heater.
  • WARNING! In order to avoid overheating, do not cover the heater.
  • DO NOT use the heater to dry clothes or similar articles.
  • DO NOT position the appliance in close proximity to curtains or other combustible materials. Keep combustible materials such as furniture, cushions, bedding, paper, clothes, curtains etc at least 1mtr away from the heater.
  • DO NOT let animals or children touch or play with the appHance.
  • ATTENTION! The outlet grills get hot during operation i.e. 80°C (175°F).

IMPORTANT SAFETY INSTRUCTIONS

  • DO NOT USE the heater if it has been dropped of damaged or if the mains lead or plug has been damaged until a qualified engineer has examined it and where necessary repaired it.
  • Keep the appliance and cable away from sources of heat, sharp objects or anything that may cause damage.
  • The heater must not be located immediately below a socket-outlet.
  • To prevent overload and blown fuses, DO NOT plug other appliances into same outlet (receptacle).
  • DO NOT insert any objects into the heater.
  • DO NOT wall mount.
  • If the appliance and/or supply cord is damaged, it must only be replaced by the manufacturer or its service agent or a similarly qualified person to avoid a hazard.
  • ENSURE that the appliance is switched off before connecting to the mains power supply.
  • Switch off the power supply and unplug from the mains socket when not in use, before cleaning or changing accessories.
  • DO NOT place the heater on carpets and DO NOT place the cable under carpets.
  • This heater is for indoor use only.
  • NEVER use this heater where it could come in contact with water i.e. bathroom, shower room, kitchens. Do not use this heater in the immediate surroundings of a bath, shower or swimming pool.
  • NEVER leave the appliance unattended when connected to the main power supply.
  • Children should be closely supervised at all times when they are near any electrical appliance.
  • DO NOT touch the hot surfaces

IMPORTANT SAFETY INSTRUCTIONS

  • ALWAYS ensure that hands are dry before operating or adjusting any switch on the product or touching the plug and mains supply connections.
  • DO NOT use this heater with a programmer, timer, separate remote-control system or any other device that switches the heater on automatically, since a fire risk exists if the heater is covered or positioned incorrectly.
  • To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces like a bed, where openings may before blocked.
  • DO NOT store away until the heater cools down, store the heater in a cool, dry location when not in use.
  • DO NOT use extension cables with this product.
  • ALWAYS operate on a flat horizontal surface.
  • DO NOT operate in areas where gasoline, paint or other flammable liquids are used or stored.
  • The most common cause of overheating is deposits of dust or fluff in the appliance. Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning air vents and grilles.
  • Always use heater in an upright position.
  • DO NOT use the appliance in rooms less than 4m2 area.
  • To disconnect the appliance, switch if ‘OFF, then remove the plug from the outlet. DO NOT pull out the cord because this could damage it.
  • CAUTION! Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.

IMPORTANT SAFETY INSTRUCTIONS

  • CAUTION! In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must not be supplied through an external switching device such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
  • The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
  • Children should be supervised to ensure that they do not play with the appliance.
  • Children of less than 3 years should be kept away unless continuously supervised.
  • Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  • Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.

THIS HEATER MUST BE USED WITH A RESIDUAL CURRENT CIRCUIT BREAKER ON A 230V MAIN SUPPLY ONLY. THE VOLTAGE MARKED ON THE HEATER MUST CORRESPOND TO THE SUPPLY VOLTAGE. THE HEATER IS FITTED WITH A MOULDED 13amp PLUG AND 13amp FUSE.

WARNING! PLEASE NOTE

There may be a small amount of smoke emitted as the element first heats and burns any residue left from manufacture, this will stop fairly quickly, but it is recommended that a window is briefly opened to vent smoke released when first used.

USING YOUR HEATER

Before Switching On
Ensure that all the packing items are removed (read any warning labels carefully) and that all warnings and instructions in this instruction manual have been read carefully.
Operation
When you are certain that you have positioned the heater correctly, plug in and switch on at the wall socket.
Controls
The fan heater incorporates a rotate on switch. You can select the different air options by turning the switch clockwise to:

Controls

 OFF
 Fan
I Warm air (1000W)
II Warm air (2000W)

Use of the Thermostat

Turn clockwise to increase the heat output

  • Plug the heater into a suitable power outlet, taking note of all the advice in this manual regarding positioning and switching on.

USING YOUR HEATER

To Use the Fan Only Function

  • Turn the control dial to “FAN”. The fan will blow out air at room temperature.
  • If the fan does not operate, the ambient room temperature is cooler than the built-in thermostat “OFF” level.
  • Turn the thermostat dial gradually clockwise and the fan will start blowing.
  • As soon as the fan starts, the light in the front of the machine will illuminate.

To Use the Machine for Heating

  • Turn the dial to “I” for full heat.
  • Set the level of heat by turning the thermostat dial gradually clockwise for the lowest heat and fully clockwise for maximum.
  • The thermostat will turn the machine off when the selected room heating is achieved. When the temperature drops it will turn on again automatically.
  • For maximum heat output use “II” with the thermostat turned fully clockwise.

OVERHEATING

The thermostat will turn the machine off if it overheats.

Overheating can be caused by obstruction to the air intakes on the back of the machine or the grille on the front. If this occurs please disconnect the machine and allow it to cool for 30 minutes. Remove any obstruction and turn the machine back on.
If the heater ceases to function, the most likely cause is a blown fuse. Simply replace the 13amp fuse in the plug and reconnect.

MAINTENANCE

There are no parts inside the machine that require your attention or servicing. Do not try to open the outer case. By doing so you could damage the motor and heating element and invalidate the warranty. If you have a problem with the heater, or if the power cord gets damaged in any way you MUST take the unit to a suitably qualified engineer or electrical repair centre.

  • Before cleaning the machine, please make sure it is disconnected from the power supply and has cooled down completely.
  • Do not clean the machine in water and do not let it get wet under any circumstances.
  • The outer casing can be cleaned using a slightly damp lint-free cloth (a small amount of detergent can be used if required).
  • To remove any dust from inside the front grille,or the rear air intakes, you can use a regular vacuum cleaner.
  • Always make sure the machine is completely dry before using.
  • If you are not going to use the heater for a while, it is best to make sure that it is clean and dry and then store it inside a plastic bag in a cool dry place.
  • With sensible care and attention, this heater will give you many years of good service and economical heating.

TECHNICAL DETAILS

Model No: SFH2

Table: Model Identifier for Electric Local Space Heaters
Item| Symbol| Value| Unit
Heat Output
Nominal heat output| | | kW
Minimum heat output (indicative)| | | kW
Maximum continuous heat output| | | kW
Auxiliary Electricity Consumption
At nominal heat output| | | kW
At minimum heat output| | | kW
In standby mode| | | kW
Type of heat input, for electric storage local space heaters only (single select)
Manual heat charge control, with integrated thermostat|

  • Yes  No

Manual heat charge control, with room and/or outdoor temperature feedback|

  • Yes  No

Electronic heat charge control with room and/or outdoor temperature feedback|

  • Yes  No

Fan assisted heat output|

  • Yes  No

Type of heat output / room temperature control (single select)
Single stage heat output and no room temperature control|

  • Yes  No

Two or more manual stages, no room temperature control|

  • Yes  No

With mechanic thermostat room temperature control|

  • Yes  No

With electronic room temperature control|

  • Yes  No

Electronic room temperature control plus day timer|

  • Yes  No

Electronic room temperature control plus week timer|

  • Yes  No

Other control options (muItiple selections possible)
Room temperature control, with presence detection|

  • Yes  No

Room temperature control, with open window detection|

  • Yes  No

With distance control option|

  • Yes  No

With adaptive start control|

  • Yes  No

With working time limitation|

  • Yes  No

With black bulb sensor|

  • Yes   No

Contact Details| PO Box 1042, Ipswich, IP1 9XY

CONFORMITY WITH DIRECTIVES

Symbol MUNRO IMPORTERS LTD
Declaration on of Conformity
In accordance with Government Guidance

We, the importer:

Munro Importers Ltd
First Floor, Unit 1 The Quadrangle The Dri?, Nacton Road,
Ipswich Suffolk IP3 9QR

Declare that the product:

Product code: 877043 SFH2
Product descrip?on: SupaWarm 2000w Fan Heater

Is in conformity with the relevant statutory instruments and their amendments:

Electromagnetic Compatibility Regulations 2016 and EMC Directed 2014/30/EU
Electrical Equipment (Safety) Regulons 2016 and Low Voltage Directed 2014/35/EU
COMMISSION REGULATION (EU) 2015/1188 of 28 April 2015 implement Directed 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for local space heaters Directed 2011/65/EU on the Restrictor of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (RoHS) with its Amendments (EU) 2015/863

And is manufactured in accordance with the following Standard or standardized documents:

EMC

EN 55014-1:2017+A11, EN 55014-2:2015, EN IEC 61000-3-2:2019, EN 61000-3-3:2013+A1 BS EN 60335-2-30:2009+A11, BS EN 60335 1:2012+A11+A13+A1+A14+A2, BS EN 62233:2008, AfPS GS 2019:01 PAK EN 62321-1:2013, EN 62321-2:2014, EN 62321-3-1:2014, EN 62321-4:2014/A1:2017, EN 62321-5:2014, EN 62321-7-1:2015, EN 62321-7-2:2017, EN 62321-6:2015, EN 62321-8:2017

All document on is held on file and is available, on request, for review.
Authorized Signatory:

Date: 16.05.2023
Name: Dominic Richardson
Plosion: Product Coordinator
Year of Manufacture: 2023

FURTHER INFORMATION

This appliance is provided with two safety devices which will switch off the heater in case of accidental overheating. To reset, disconnect the plug from the power for a few minutes, remove the cause of overheating, then plug the appliance in again. If the heater cannot be reset, ask a qualified technician to check and repair.

Correct disposal of this product

Disposal| This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling|

THANK YOU FOR PURCHASING

For a complete range of fires, radiators and heaters please call or visit Supa Brands for further information:

Website: www.supabrands.co.uk
Part of the extensive Supa Brand Range

Helpline: 01473 237 997
PO Box 1042, Ipswich, IP1 9XY

Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals