Add On GL1800 Saddle Bag Molding Kit Instruction Manual
- June 13, 2024
- Add On
Table of Contents
Add On GL1800 Saddle Bag Molding Kit
Product Information
- The Saddlebag Molding Kit for GL1800 is designed to enhance the appearance of your motorcycle’s saddlebags.
- It includes right and left side moldings, as well as right and left rear side moldings.
- The kit also comes with adhesive tape for easy installation.
Product Usage Instructions
- Before starting the installation, read the instructions carefully.
- Open the right saddlebag lid and carefully remove the original right-side moldings.
- Take the right side molding from the kit and install it in the reverse order of removal. Make sure it is securely attached.
- Install the left-side molding from the kit in the same manner as the right-side moldings. Ensure it is properly aligned.
- Remove the paper backing from the adhesive on the double-sided adhesive tape.
- Apply the adhesive tape to the back of the right rear side molding and press it firmly onto the saddlebag lid.
- Repeat step 6 for the left rear side molding, ensuring it is aligned with the saddlebag lid.
- Use a Phillips screwdriver to secure the moldings in place with screws, if provided.
- For best results, clean the surface of the saddlebags with a 50/50 water/isopropyl alcohol mix and shop towels before installing the moldings.
Note: If you encounter any difficulties during the installation process or have any questions, please contact us at PH: 508-791-7552 or email us at info@addonaccessories.net. You can also visit our website at www.addonaccessories.net for more information.
INSTALLATION
Read Instructions Carefully before Installing
- Open the right saddlebag lid And remove the original Right side moldings.
- Install the right side moldings From the kit in the reverse order of removal.
- Install the left side molding from The kit in the same manner as the Right side moldings.
Parts List
| No. | Description | Qty |
|---|---|---|
| 1 | Right Side Molding | 1 |
| 2 | Left Side Molding | 1 |
| 3 | Right Rear Side Molding | 1 |
| 4 | Left Rear Side Molding | 1 |
Tools Required
- Phillips screwdriver
Supplies Required
- 50/50 Water/Isopropyl Alcohol Mix Shop towels
CONTACT
- 133 Gold St, Worcester, MA 01608 PH: 508-791-7552 800-821-9861 FX: 508-793-2919
- Email: info@addonaccessories.net. web: www.addonaccessories.net.
References
Read User Manual Online (PDF format)
Loading......