ATEN US3312 2-Port USB-C 4K DisplayPort KVM Switch with Remote Port Selector User Guide
- June 4, 2024
- Aten
Table of Contents
ATEN US3312 2-Port USB-C 4K DisplayPort KVM Switch with Remote Port
Selector
Hardware Overview
Installation
Package Contents
- 1 2-Port USB-C 4K DisplayPort KVM
- Switch with Remote Port Selector
- 1 user instructions
Support and Documentation
Notice All information, documentation, firmware, software utilities, and
specifications contained in this package are subject to change without prior
notification by the manufacturer.
To reduce the environmental impact of our products, ATEN documentation and
software can be found online at http://www.aten.com/download/
Technical Support www.aten.com/support
US3312 2-Port USB-C 4K DisplayPort KVM Switch with Remote Port Selector
Hardware Overview
Front View
- port LEDs
- console ports
- remote port selector
- USB-C connector 1
- USB-C connector 2
Installation
- Connect the USB mouse, USB keyboard, and DisplayPort monitor into their
- Connect the USB-C connectors of the attached KVM cables into their respective ports on the USB-C devices that you are installing.
Operation
Press the remote port selector to switch KVM control between the two
computers. The port LED for the selected port lights green.
Switching Between High Speed and Normal Speed Modes
To switch between high speed and normal speed modes, press and hold the remote
port selector for 5 seconds.
- High Speed Mode: The port 1 and port 2 LEDs fl ash once to indicate the device is set to high speed mode. This is the default setting.
- Normal Speed Mode: The port 1 and port 2 LEDs fl ash twice to indicate the device is set to normal speed mode.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>