fontastic CRANK 10 USB Solar Power Bank User Manual
- June 13, 2024
- fontastic
Table of Contents
USB Solar Power Bank
10.000 mAh
CRANK10 User Manual
Please read these operating instructions carefully before using the device.
Scope of delivery
- Fontastic® Powerbank Crank10
- USB charging cable
- This user manual
Function overview
- USB Type-C® input
- USB-A outputs
- LED light
- Solar panel
- Battery level LED
- Hand crank
- Solar LED
- Power button
- Protective cover
Power Bank Charging
The Fontastic® Powerbank Crank is equipped with a rechargeable lithium polymer
battery. Open the protective cover (9) of the powerbank and connect the
powerbank to a USB charger via the Type-C input (1). The battery level
indicator (5) flashes during charging.
When fully charged, the LED indicator is at 100%.
The charging process is completed. Disconnect the power bank from the charger.
Note: Fully charge the power bank before using it for the first time. The
usual charging time is about 4 hours, but may vary depending on the power of
the USB charger used.
The solar panel and hand crank are intended for emergency use if there is no
mains power available for charging. Charge the powerbank from the mains if
possible.
Solar panel:
The powerbank is equipped with a solar module (4), which charges the powerbank
as soon as the light conditions are sufficient. The red LED (7) lights up when
the powerbank is charging via the panel.
Hand crank:
The hand crank (6) is designed to power the powerbank in emergency situations
when there is no mains power or sunlight. Unfold the hand crank and turn the
crank at a steady speed for a few minutes to generate power for emergency use.
Check battery level of the power bank
To check the battery level, press the power button. The LED indicator will
light up for a few seconds, showing the powerbank battery level (5) in 25%
increments.
100% means your powerbank is fully charged, 25% means it is almost empty and
should be charged promptly.
Charge devices using the power bank
Open the protective cover (9) to access the powerbank‘s ports. Connect the
device to be charged to a USB cable, and this to one of the USB-A outputs (2)
of the powerbank.
The charging process will begin. The powerbank allows you to charge two
devices at the same time.
Disconnect all cables from the powerbank after use.
Note: If a short circuit occurs while charging a device, the powerbank will
shut down. Plug the cable into the Type-C input of the powerbank, and connect
the USB-A plug of the cable to a USB charger or a computer.
A short charging pulse is enough to reactivate the powerbank.
LED Light:
The integrated LED light is operated by the power button (8).
To switch on, press and hold the power button for approx. 3 seconds. Pressing
the Power button briefly again will change the light mode.
To switch off, press and hold the Power key for approx.
3 seconds.
Safety instructions:
- Never open the device
- Do not immerse the device in water and protect it from moisture.
- Never connect the power output to the power input or vice versa.
- Never connect cables by force.
- Keep electrical appliances away from children.
- Unplug electronic equipment when not in use for extended periods of time.
- Never use the product if it has visible damage.
Specifications:
- Battery: 10,000mAh 37Wh
- Input Type-C: 5V/2.0A
- Solar panel: 5-5.5V 1.2W 200mA
- Hand crank: 5W at 180rpm
- Output USB-A 1 & USB-A 2: DC 5V/2.0A
- Total power: 10W
- LED light: color temperature: 6000-7000k, 100 LM
- Housing material: PC + ABS
- Dimensions: 145 x 80 x 35 mm
- Weight: 320g
Note on environmental protection:
From the date of implementation of the European Directive 2012/19/EU
into national law, the following applies: Electrical and electronic equipment
must not be disposed of with household waste. The consumer is legally obliged
to return electrical and electronic devices at the end of their service life
to the public collection points set up for this purpose or to the point of
sale. Details are regulated by the respective national law. The symbol on the
product, the instructions for use or the packaging indicates these
regulations. By recycling, material recovery or other forms of recovery of old
devices, you are making an important contribution to the protection of our
environment.
We hereby declare, that this device carries the CE mark in accordance
with the regulations and standards.
It therefore complies with the essential requirements of the EMC Directive
2014/30/EU, as well as the Low Voltage Directive 2014/35/EU and the RoHS
Directive 2011/65/EU.
The full text of the EU Declaration of Conformity is available at the
following Internet address:
www.d-parts.de/konfo
Technische Daten und Irrtümer vorbehalten / Technical data and
errors excepted
USB Type-C ® and USB-C® are registered trademarks of USB Implementers Forum.
Registered trademarks are the property of their respective owners.
Fontastic, by D-Parts GmbH Birkenweiher Str. 16
63505 Langenselbold, Germany, www.d-parts.de
V1_0223
Documents / Resources
|
fontastic CRANK 10 USB Solar Power
Bank
[pdf] User Manual
CRANK 10 USB Solar Power Bank, CRANK 10, USB Solar Power Bank, Solar Power
Bank, Power Bank, Bank
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>