fontastic Renz20 USB Powerbank User Manual

: June 13, 2024
: fontastic

Table of Contents

fontastic Renz20 USB Powerbank
Product Information
Product Usage Instructions
Package contents
Overview
Charge power bank
Technical data
Safety advice
Documents / Resources

fontastic Renz20 USB Powerbank

fontastic-Renz20-USB-Powerbank-PRODUCT

Product Information

Product Name: USB Powerbank Renz20
Battery Capacity: 20,000 mAh

Product Usage Instructions

Charge Power Bank

Note: Fully charge the power bank before using it for the first time.
The usual charging time is approximately 4 hours, but this may vary depending on the used USB charger.

Check the Battery Level of the Power Bank

To check the battery level, press the battery level button (2). The LED lights will illuminate for several seconds and will show the battery level. Four LEDs mean your power bank is fully charged, and one LED means it is almost empty.

Charge Devices using the Power Bank

Connect the device to be charged to a USB cable.
Connect the USB cable to one of the USB-A ports (3,5) or the USB Type-C port (4) of the power bank.
The charging process will start.
Disconnect the cable from the power bank after use.

Note: When using USB ports at the same time, the available current will be shared. Consult the device manual to determine the power consumption required.
Note: If there is a short circuit while charging a device, the power bank will turn off. Plug the micro-USB cable into the power bank micro-USB input, and connect the USB plug on the cable to a USB charger or computer.
A short charge pulse is sufficient to reactivate the power bank.
In case you need technical support, please contact our support team by email at service@fontastic.eu.
For more technical data and safety advice, please refer to the user manual.
Note on environmental protection: By disposing of old devices properly or finding alternative forms of utilizing old devices, you are making an important contribution to protecting our environment.

Please read this user manual and follow the listed safety instructions and tips. Keep this manual so that you can access it at any time.

Package contents

Fontastic® power bank Renz20
Micro-USB cable
User manual

Overview

Battery status LED
Battery status button
USB-A output
Type-C input/output
USB-A output
Micro USB input

Charge power bank

Fontastic® power bank Renz20 is equipped with an internal rechargeable lithium polymer battery. Connect a charger to the Micro USB input (6) or the USB-Type-C™ connector (4) of the power bank.
The charging process begins.
The battery level indicator is flashing while charging.
The usual charging time is 4 hours. At full charge, all four LEDs will light and the charging process ends.
Disconnect the power bank from the charger.
Note: Fully charge the power bank before using it for the first time. The usual charging time is approx. 4 hours, but this may vary depending on the used USB charger.

Check the battery level of the power bank

To check the battery level, press the battery level button (2). The LED lights will illuminate for several seconds and will show the battery level. Four LEDs mean your power bank is fully charged, and one LED means it is almost empty.

Charge devices using the power bank

To charge devices via the powerbank, connect the device to be charged to a USB cable and connect it to one of the USB-A ports (3,5) or the USB Type-C port (4) of the power bank. The charging process will start. Disconnect the cable from the power bank after use.
Note: When using USB ports at the same time, the available current will be shared.
Consult the device manual to determine the power consumption required.
Note: If there is a short circuit while charging a device, the power bank will turn off.
Plug the micro-USB cable into the power bank micro-USB input, and connect the USB plug on the cable to a USB charger or computer.
A short charge pulse is sufficient to reactivate the power bank.
In case you need technical support, please contact our support team by e-mail at service@fontastic.eu.

Technical data

Capacity: 20.000 mAh 74 Wh / 3.7V
Input Micro USB/Type-C: 5.0V DC 2.0A
Output USB-A1: 5.0V DC 2.0A
Output USB-A2: 5.0V DC 2.0A
Output Type-C: 5.0V DC 2.0A
Total Power: 5.0V DC 2.0A 10W
LED Charge level indicator
Dimensions: 136 x 68 x 28 mm
Weight: 410g

Safety advice

Do not open the device.
Do not hold the device underwater.
Keep it safe from humidity.
Do not connect the power output to the power input or vice versa.
Do not connect the adapter to the device by using force.
Keep the device away from children.
Disconnect electronic devices from the power when not using them for a longer time.
Do not use the device when it has visible defects.

Note on environmental protection:

After the implementation of the European Directive 2012/19/EU in the national legal system, the following applies:
Electrical and electronic devices may not be disposed of with domestic waste.
Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to the public collecting points set up for this purpose or point of sale.
Details of this are defined by the national law of the respective country.
This symbol on the product, the instruction manual, or the package indicates that a product is subject to these regulations.
By recycling, reusing materials, or other forms of utilizing old devices, you are making an important contribution to protecting our environment.
We hereby declare that this device carries the CE mark in accordance with the regulations and standards.
It conforms with the fundamental requirements of the EMC directive 2014/30/EU, as well as the RoHS 2 2011/65/EU directives.
The full text of the EU Declaration of Conformity is available at the following internet address: www.d-parts.de/Konfo
Technical data and errors excepted USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.
Registered trademarks are the property of their respective owners.
Fantastic, by D-Parts GmbH
Birkenweiher Str. 16 63505 Langenselbold, Germany, www.d-parts.de