Kruger Matz KM0823 AM FM Radio Domowe User Manual

June 13, 2024
Kruger Matz

Kruger Matz KM0823 AM FM Radio Domowe

Kruger-Matz-KM0823-AM-FM-Radio-Domowe-fig-1

Product Information

  • Product Name: AM/FM Radio KM0823
  • Languages: German (DE), English (EN), Polish (PL), Romanian (RO)

Features

  • Speaker
  • Tuning knob
  • Volume; ON/OFF knob
  • Tuning indicator (green)
  • Power indicator (red)
  • AM/FM knob
  • Frequency control
  • Antenna
  • AUX input
  • Headphone output
  • Power socket

Product Usage Instructions

Safety Instructions
Read the instruction manual carefully before first use and keep it for future reference. The producer does not claim liability for any damage caused by inappropriate use and handling or any mechanical damage.

  • Protect the device from water, humidity, and other liquids.
  • Avoid exposing the device to high temperatures and sharp edges.
  • Before connecting the device, ensure compatibility with the power supply voltage.
  • Use the device only indoors.
  • Avoid operating the device with wet hands.
  • Do not obstruct ventilation.
  • Disconnect the power cord by pulling the plug, not the cable.
  • Use only authorized accessories.
  • The device can be used by children above 8 years old and individuals with reduced capabilities if supervised by a responsible person.

Operation

  1. Connect one plug of the power cord to the power socket.
  2. Turn on the device using the volume/ON-OFF knob.
  3. Use the tuning knob to select the desired radio frequency.
  4. Adjust the volume using the volume knob.
  5. Use the AM/FM knob to switch between AM and FM modes.
  6. Connect an external device (e.g., phone, MP3 player) to the AUX input using a 3.5mm jack cable to play audio through the radio speaker.
  7. To listen privately, connect headphones to the headphone output at the back of the device using a 3.5mm jack cable.
    Note: When disconnecting the external device while the 3.5mm jack cable is still connected to the AUX input, the device will automatically turn off after 15 minutes.

Cleaning and Maintenance
Use a soft, damp cloth to clean the device. Do not use abrasive cleaners or chemicals.

SAFETY INSTRUCTIONS

Read the instruction manual carefully before first use and keep it for future reference. Producer does not claim liability for any damage caused by inappropriate use and handling or any mechanical damage.

  1. Protect this device from water, humidity and other liquids. Avoid using/storing it in the strongmagnetic environment. Do not expose it to direct sunlight and other sources of heat.
  2. Don’t let excess cord hang over the edge of the table or worktop or touch hot surface.
  3. Before connecting the device to power supply socket, make sure the voltage indicated on the device corresponds to the voltage in the power supply socket.
  4. Device for indoor use only.
  5. Do not handle this device with wet hands.
  6. Do not obstruct ventilation by covering ventilation openings. Install this device according to the instructions given in this operating manual.
  7. Do not install this device near any heat sources such as radiators, stoves or other devices that produce heat.
  8. Keep minimum distances (5 cm) around the product for sufficient ventilation.
  9. Do not use the device nearby open flames such as candles.
  10. Disconnect this device from power supply if it is not going to be used for a long period of time.
  11. When you disconnect the power cord of the device, grasp and pull the plug, not the cord/cable.
  12. Use only authorized accessories.
  13. This appliance may be used by children who are above 8 years old and by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they are supervised and guided by a person who is responsible for their safety in a cautious manner for all the safety precautions being understood and followed. Children should be supervised to ensure that they do not play with the appliance. Children should not perform cleaning and servicing of the device unsupervised.
  14. To prevent damage to your hearing keep the volume at a reasonable level throughout entire time of using the device.
  15. Never use this device if the power cord or the device itself is damaged.
  16. Do not disassemble nor repair this device yourself. The device has no user serviceable parts inside. In case of damage, contact authorized service point for check-up or repair.
  17. Always disconnect the product from the power mains before cleaning.
  18. Clean the device with a soft, slightly damp cloth.
  19. Do not use any chemical agents to clean this device.

PRODUCT DESCRIPTION

  1. Speaker
  2. Volume; ON/OFF knob
  3. Tuning indicator (green)
  4. Power indicator (red)
  5. AM/FM knob
  6. Tuning knob
  7. Headphone output
  8. AUX input
  9. Antenna
  10. Power socket

OPERATION

  1. Connect one plug of the power cord to the power socket at the back of the device; connect the other plug to the wall outlet.
  2. Turn the volume knob clockwise to turn on the radio. The power indicator lights up. Set desired volume.
  3.  Use the AM/FM knob to set the desired band.
  4. Pull out the telescopic antenna and adjust itslength and angle for optimum reception (for FM band); rotate the entire unit for best reception (for AM band).
  5. Rotate the tuning knob to set the frequency. When the signal strength is strong, the tuning indicator will light up.
  6. To turn off the radio turn the volume knob anticlockwise until clicking sound is heard. The power indicator goes off.
  7. To switch off the set completely, disconnect the power cord from the wall outlet.

AUX INPUT

  1. Plug the 3,5 mm jack cable into the AUX input at the back of the device; then connect the other end of that cable to the AUX output of the external device.
  2. Music from the connected device will play through the radio speaker.
  3. Rotate the volume knob on the radio to set the desired volume.
    Note: When the external device is disconnected (while 3,5 mm jack cable is still connected to the AUX input of the device), the device will automatically turn off after 15 minutes.

Headphone output: Connect the headphones to the headphone output at the back of the device with a3,5 mm jack cable.

SPECIFICATION

  • Telescopic antenna
  • LED indicators
  • Radio frequency:
    • AM: 522 – 1620 kHz
    • FM: 87,5 – 108 MHz
  • Speaker: 3” (50 mm)
  • Impedance: 8 Ohm
  • Output power: 2 W
  • AUX input (3,5 mm jack)
  • Headphone output (3,5 mm jack)
  • Power consumption: 8 W
  • AC power supply: 230 V; 50 Hz
  • Dimensions: 221 x 120 x 128 mm
  • Weight: 1,1 kg

DISPOSAL

(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals