Dynojet 2005 Benelli TNT 1130 Power Commander III Instruction Manual

June 13, 2024
Dynojet

Dynojet 2005 Benelli TNT 1130 Power Commander III Instruction Manual

Parts List

1 Power Commander
1 USB Cable
1 CD-ROM
1 Installation Guide
1 Power Adapter
2 Power Commander Decals
2 Dynojet Decals
2 Velcro® Strip
1 Alcohol Swab

The ignition MUST be turned OFF before installation!

You can also download the Power
Commander software and latest maps from our web site at:
www.powercommander.com

PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION

Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89081 800-992-4993 www.powercommander.com

  1. Remove the seats

  2.  Remove the fuel tank.

  3.  Mount the Power Commander on topof the battery using the supplied velcro. Use the alcohol swab to cleanboth surfaces before attaching (Fig. A)

  4. Attach the ground wire of the PCIII to the negative side of the battery.

  5. Route the Power Commander harnessalong the right side of the ECU andthe subframe and go towards the thorttle bodies (Fig. B)
    .

  6. Unplug the stock wiring harness from each injector (Fig. C).

  7. Plug the PCIII connectors in-line of the stock wiring harness and injector (Fig. D).
    ORANGE – right cylinder YELLOW – middle cylinder
    GREEN – left cylinder Align the PCIII connector to the stock wiring harness as shown below. The square edges of the PCIII connector align with the spring clip side of the stock wiring harness

  8. 8 Locate the Throttle Position Sensor connector. This is located on the right hand side of the throttle bodies
    (Fig. E).

  9.  Unplug this connector and plug the connectors from the PCIII in-line of the stock wiring harness and TPS.

  10.  Install the fuel tank. Make sure that the PCIII harness does not get pinched by the fuel tank.

  11.  Install the seats.

Read More About This Manual & Download PDF:

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals