Lanto Electronic LPS-15WP K Wireless Charger Module User Manual
- June 6, 2024
- Lanto Electronic
Table of Contents
Safety & Regulatory Guide for [LPS-15WP K Wireless Charger Module].
Product Name： Wireless Charger Module
Brand Name： LUXSHARE-ICT
Type Number： LPS-15WP K
Input：12Vdc 1A
Output:15W Max.
It is a 15W WPC wireless charger module for charging a single phone or
phablet.
The wireless charger is built into the base of select LENOVO AIO or PC base
unit Allin-One computers.
Place any Qi-enabled device on the base for charging.
- Place the device on the base of the computer.
- Position the device wireless charging coil directly on top of the square icon on the base
Troubleshooting charging issues
If the wireless charging feature does not work as expected, verify the following:
-
Make sure that your mobile device is capable of wireless charging. See the product specifications of your mobile device.
-
Make sure that your mobile device is placed correctly on the base.
-
This booklet provides important safety, regulatory information that you should read before you start using your [LPS-15WP K Wireless Charger Module]
-
To avoid damaging your device, accessories, or any connected devices, and to reduce the risk of personal injury, discomfort, property damage or other potential hazards, follow these precautions below :
-
Handle your [LPS-15WP K Wireless Charger Module] with care. You may damage the device if you disassemble, drop, bend, burn, crush or puncture your device. Using a damaged device may cause overheating or injury. Don’t expose your [LPS-15WP K Wireless Charger Module] to liquids, which can cause a short circuit and overheat.
The [LPS-15WP K Wireless Charger Module] is designed to work best in ambient temperatures between 0 and 40° C. -
Maintain a distance of 10 cm from your body to be consistent with how the device is tested for compliance with RF exposure requirements.
-
Compliance with 2014/53/EU Radio Equipment Directive (RED), RER 2017 (SI 2017/1206)
The full text of the EU Declaration of Conformity is available at: http://www.hp.com/go/orderdocuments -
In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table provides information on the frequency bands used and the maximum RF transmit power of the product for sale in the EU, UK:
WPC| Frequency range| Output power
---|---|---
110-148kHz| < 0 dBuNnn@10nn -
RF Exposure Information (MPE)
This device meets the EU requirements and the International Commission on NonIonizing Radiation Protection (ICNIRP) on the limitation of exposure
of the general public to electromagnetic fields by way of health protection.
Waste Electrical and Electronic Equipment (WEEE) & Batteries Directive
The WEEE symbol above means that according to local laws and regulations your product [and its battery] must be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities for safe disposal or recycling. The separate collection and recycling of your product and its battery will help conserve natural resources, protects human health, and help the environment.
EMC Compliance
Important: This device and power adapter have demonstrated Electromagnetic
Compatibility (EMC) compliance under conditions that included the use of
compliant peripheral devices and shielded cables between system components. It
is important that you use compliant peripheral devices and shielded cables
between system components to reduce the possibility of causing interference to
radios, televisions, and other electronic devices.
Changes or modifications to this product not authorized by Lenovo could void the electromagnetic compatibility (EMC) and wireless compliance and negate your authority to operate the product.
Regulatory Information: United States
FCC REGULATORY COMPLIANCE
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Changes or modifications not expressly approved by Lenovo could void your
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions:
- These devices may not cause harmful interference.
- These devices must accept any interference received, including interference that may cause undesired operation.
Maintain a distance of 20 cm (8 inches) from your body to be consistent with how the device is tested for compliance with RF exposure requirements.
FCC ID: 2APYS-LPS15W PK
EMC COMPLIANCE STATEMENT
Important: This device [and its power adapter] have demonstrated Electromagnetic Compatibility (EMC) compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions, and other electronic devices.
RADIOFREQUENCY EXPOSURE
This device meets the U.S. Federal Communications Commission’s (FCC) requirements for exposure to radio waves and is designed and manufactured not to exceed the FCC’s emission limits for exposure to radiofrequency (RF) energy. To comply with FCC RF exposure compliance requirements, this device must not be co-located or operating in conjunction with any other antenna or transmitter.
Innovation, Science and Economic Development (ISED) Canada Regulatory Compliance
IC: 23965-LPSI 5WPK
INDUSTRY CANADA, CLASS B
This Class B digital apparatus complies with CAN ICES-003(B)/NMB-003(B).
Innovation, Science and Economic Development Canada (ISED Canada)/Innovation, Sciences et Développement économique Canada Industry Canada/Industrie
This device complies with ISED’s license-exempt RSS. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Radio Frequency Exposure
The output power of the radio technology used in the Device is below the radio
frequency exposure limits set by ISED for an uncontrolled environment.
Maintain a distance of 10 cm from your body to be consistent with how the
device is tested for compliance with RF exposure requirements.
NCC
Documents / Resources
|
Lanto Electronic LPS-15WP K Wireless Charger
Module
[pdf] User Manual
LPS15WPK, 2APYS-LPS15WPK, 2APYSLPS15WPK, LPS-15WP K Wireless Charger Module,
Wireless Charger Module, Charger Module
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>