SINGSATION TOUR All-In-One Karaoke System User Guide

SINGSATION TOUR All-In-One Karaoke System

Product Information

The Singsation Tour is an all-in-one karaoke system that allows you to sing along to your favorite music. It comes with a speaker, microphone, and remote control. The speaker has a built-in rechargeable battery and Bluetooth connectivity, allowing you to connect it to your phone or other Bluetooth devices. The speaker also features a light show mode that adds visual effects to your karaoke experience.

Product Usage Instructions

• Step 1: Unpack
  Make sure all the necessary items are included in the package.

• Step 2: Charge the Speaker
  Connect one end of the charging cable to the DC5V jack on the top of the speaker and the other end to a USB charging adapter. Make sure the speaker is fully charged before use.

• Step 3: Plug In the Mic
  Connect the microphone cable to the MIC jack on the top of the speaker.

• Step 4: Remove the Remote Battery Tab
  Pull out the battery tab from the bottom of the remote control to activate it.

• Step 5: Turn On the Speaker
  Switch the ON-OFF switch on the top of the speaker to the ON position. The speaker will announce Pairing.

• Step 6: Pair With the Speaker
  Enable Bluetooth on your phone and select “Singsation SPKA26” from the available devices to pair with the speaker. The speaker will announce “Device connected” when successfully paired.

• Step 7: Start Playing Music
  Turn up the volume on your phone to 75% and start playing music.

• Step 8: Turn On the Mic and Sing Along!
  Switch the microphone’s ON/OFF switch to the ON position and start singing.

Additional Usage Instructions

• To adjust the music volume: Use the volume controls on your phone.
• To adjust the volume of music and voice: Turn the VOL dial on the top of the speaker.
• To play/pause the music: Press the button on the top of the speaker or on the remote control.
• To skip to the next/previous track: Press the respective buttons on the top of the speaker or on the remote control.

Using Two Singsation Tour Speakers Together (TWS Mode)
If you have two Singsation Tour speakers, you can set them up to play together in True Wireless Stereo (TWS) mode. Follow these steps:

1. Make sure both speakers are turned on.
2. Double press the button on one of the Singsation Tours. The speaker will play a sound to indicate it’s ready for TWS pairing.
3. Press and hold the button on the same speaker until you hear a second sound. The speakers are now in TWS mode.

To return to single-speaker mode, turn off one of the speakers or press and hold the button on that speaker. The speakers will enter TWS mode again when turned on.

Using the Light Show
The Singsation Tour has various light show modes that are enabled by default when the speaker is turned on. To cycle through the light show modes, press the button on the top of the speaker. The final press will turn off the light show.

Unpack

Make sure the following items came in this package:

• Singsation Tour All-In-One Karaoke System
• Microphone with Cable
• Charging Cable
• Remote Control

Charge the Speaker

Plug one end of the charging cable into the DC5V jack on the top of the speaker. Plug the other end into a USB charging adapter (not included).

Plug In the Mic

Plug the microphone cable into the MIC jack on the top of the speaker.

Remove the Remote Battery Tab

Pull the battery tab out of the bottom of the remote. The battery will start powering the remote so you can use it.

Turn On the Speaker

Move the ON-OFF switch on the top of the speaker into the ON position. The speaker announces “Pairing.”

• Note: When the speaker’s ON-OFF switch is in the ON position, you can use the remote’s button to turn the speaker on and off.

Pair With the Speaker

• Make sure your phone’s Bluetooth is turned on. Select Singsation SPKA26 from the available devices to pair to the speaker.
• The speaker announces “Device connected” when it’s finished pairing and connecting to your Bluetooth device.

Note: The process of enabling Bluetooth and connecting varies from device to device. See your device’s owners manual for more information and specific instructions.

If you’ve previously paired your phone or other Bluetooth device with the Singsation Tour, it will automatically attempt to reconnect to that device when you switch it on. If you want to pair to a new device, turn off Bluetooth on the device that’s already paired to the speaker. The speaker announces “Pairing.”

Bluetooth Wireless Connection Tips

• Make sure the Bluetooth capability of your device is turned on.
• Make sure there’s nothing plugged into the Singsation Tour’s AUX jack when you’re trying to use Bluetooth.
• The Bluetooth wireless connection works up to a range of roughly 33 feet (10 meters). This range may vary, however, based on other factors, such as room layout, wall material, obstacles, your device’s Bluetooth performance, etc. If you’re having problems connecting to the speaker, move closer to it.
• If your device asks you for a password to connect, use “0000”.

Start Playing Music

• Turn your phone’s volume up to 75%. Then start playing music on your phone.

Turn On the Mic and Sing Along

• Move the microphone’s ON/OFF switch to the ON position and start singing!
• To adjust the music volume: Use the volume controls on your phone.
• To adjust the volume of music AND voice: Turn the VOL dial on the top of the speaker or the VOL– and VOL+ buttons on the remote.
• To play/pause the music: Press the button on the top of the speaker or on the remote.
• To skip to the next/previous track: Press the or button on the top of the speaker or on the remote.

Using Two Singsation Tour Speakers Together (TWS Mode)
If you have two Singsation Tour speakers, you can set them up to play together in True Wireless Stereo. To set up True Wireless Stereo:

1. Make sure both speakers are on.
2. Give a quick double press to the button on one of the Singsation Tours. The speaker plays a sound to indicate it’s ready for TWS pairing.
3. Press and hold the button on the same speaker until you hear the speaker play a second sound. The speakers are now in TWS mode.

To return to single-speaker mode:
Turn one of the speakers off (or press and hold the button on that speaker). Speakers return to TWS mode when they’re turned on again.

Using the Light Show

The Singsation Tour has several light show modes that turn on by default when the speaker is on.

• To cycle through the speaker’s light show modes: Press the button on the top of the speaker. The final press turns the light show off. Note: The light show does not support FM radio mode.

Using Other Audio Sources

In addition to Bluetooth audio, the Singsation Tour has four other audio sources you can use: FM radio, USB memory, SD card, and an auxiliary input.

To use FM radio:
Press and hold the M/ button on the top of the speaker. The first time you use the FM radio, press the button on the top of the speaker to scan available stations (this takes a few minutes to complete). Then use the or buttons to go to different radio stations.

To use a USB memory stick or SD card:
Plug the memory stick or SD card into the USB or TF slots on the top of the speaker. If there are MP3 music files in the top directory of the memory stick or SD card, the speaker will automatically start playing them.

Note:
The speaker offers additional functions for music playback from an SD card or USB memory stick. Press the EQ button on the remote to go through the different EQ settings (the name of each is shown on the display). Press the RPT button to repeat a track. These functions work for the USB memory stick or SD card only.

To use an auxiliary audio source:
Plug your auxiliary audio source into the AUX input on the top of the speaker using a 3.5mm audio cable (not included). The speaker automatically switches to the auxiliary input.

To return to Bluetooth audio:
Press and hold the M/ button repeatedly until the display says “BT.”

Tour of the Singsation Tour

Remote Control

• Turns the speaker on and off if the speaker’s ON-OFF switch is in the ON position.
• Mode cycles through the speaker’s light show modes. Press and hold repeatedly to cycle through the speaker’s audio inputs. mutes the audio.
• , and play/pause, skip back, and skip forward for audio on the current input (except for AUX).
• EQ switches through the EQ presets for the SD card and USB inputs. The name of each preset is shown on the speaker’s display.
• VOL– and VOL+ adjust the volume of the speaker.
• Number keys select a song directly on the TF and USB inputs.
• RPT repeats the current song on the TF and USB inputs.
• U/SD switches between the TF and USB inputs.

Speaker Top Panel

• MIC jack Plug the included mic into this jack for karaoke!
• AUX input Plug an auxiliary audio source into this jack via 3.5mm cable (not provided).
• Display shows the current source and other information depending on the source (station for FM radio, EQ setting for USB and SD card, etc.).
• TF slot and USB port Insert an SD card or USB memory stick into this slot or port to listen to the music on those media.
• DC 5V jack Plug the included micro-USB charging cable into this jack. Then plug the other end into a USB power source to charge the speaker.
• OFF-ON turns the speaker on and off. Leave this switch in the ON position to turn the speaker on and off using the remote.
• , and play/pause, skip back, and skip forward for audio on the current input (except for AUX).
• M/ cycles through the speaker’s light show modes. Press and hold repeatedly to cycle through the speaker’s audio inputs.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>