Needit Park Lite 2 Automatic Parking Disc User Guide
- June 11, 2024
- Needit
Table of Contents
Park Lite 2 Automatic Parking Disc
User Guide
The reason why we have dozens of millions of satisfied customers around Europe is NEEDIT’s high quality and patented properties.
PARK LITE 2 features

Approximately 20 seconds after you have parked your car, PARK LITE 2 automatically starts to show the arrival time. In Europe, there are three different ways of determining the arrival time:
- Real time: The actual time of arrival. Required in EST, NOR
- The arrival time is set to the next quarter. Required in DEN, AUT
- The arrival time is set to the next half hour. Required in FIN, SWE, GER, SUI


PARK LITE is a free mobile app, which reminds you when parking time is running
out.
It will also guide you back to your car if you’ve forgotten where you’ve
parked. PARK LITE does not require SIM card because the application is
installed on the phone.
Discover and download the free PARK LITE application from Google Play or App
Store or through the QR link below.
Links to applications:
The free PARK LITE mobile application is easy to use: Park your car and make
sure your phone’s GPS is turned on. Launch the application to save the car’s
location in memory. If there is another application user in the vicinity of
your car with the parking time is running out, you can see this on your phone.
Set the end time of parking in the app. The app will remind you 5, 10, 15 or
20 minutes before the end time, depending on your choice. The application will
guide you back to your car with the help of Google map. Please note that your
electronic parking disc does not require a SIM card. The application is
installed on your phone.
Discover and download application from store or through the QR code.
Links to applications: https://app.parklite.eu

- Button 1
- Button 2
- Button 3
Operating instructions
Congratulations on purchasing your new PARK LITE 2. With PARK LITE 2 in your
car, you no longer need to worry about forgetting to adjust your parking disc
and thus risking expensive fines.
PARK LITE 2 electronically records the movements of the vehicle and
automatically sets the parking disc to the current parking time.
Parking mode is only ended once the vehicle starts moving again.
Before getting started with the PARK LITE 2, please read these operating
instructions carefully. In order to guarantee correct installation of the PARK
LITE 2, please follow the instructions below:
Settings
A: Activate the battery
Wipe off the battery with a cloth and carefully insert it into the battery
compartment (it can take a little while before the display starts to flash).
B: Set the digital clock
(The clock in the PARK LITE 2 automatically switches between summer time and
winter time, but this function can be deactivated manually if required, see
C:)
-
In order to activate the setting mode, use a pointed object to press the button ② and hold it down until the “Hours”-digits starts to flash.
-
As soon as “Hours” starts flashing, press the ③ button several times until the hours is set correctly.
-
Then press the ② button and “Minutes” will start to flash. Set the minutes using the ③ button.
-
Proceed in the same way to set the year, month and date (in that order).
-
Choose the way of showing the parking start time:
0:PE
The start time is exactly the current time. If you park your car at 13:07 the display will show 13:07. This is valid e.g. in Estonia and Norway.
1:PE
The start time is set to the next quarter. If you park your car at 13:07 the display will show 13:15. This is valid e.g. in Denmark and Austria.
2:PE
The start time is set to the next half hour. If you park your car at 13:07 the display will show 13:30. This is valid e.g. in Finland, Germany and Switzerland. -
Once all the settings have been made only the colon (:) on the time display should be flashing.
If one of the digits is still flashing, press the ② button several times until
the flashing stops. To change the settings for the PARK LITE 2, the process
can be repeated by pressing and holding the ② button until “Hours” -digits
starts to flash.
Check the time and the correct functionality regularly, especially when
switching between summer and winter time. Needit ApS and importer will not
reimburse any parking charges.
C: Activating/deactivating summer/winter time
By default, the digital clock is set to switch automatically between summer
time and winter time. For countries without daylight-saving time, the function
can be deactivated as follows:
- To activate settings mode, press buttons ② and ③ at the same time until “Hours” and “Minutes” -digits shows “oN:Su”
- Slowly release the ② button.
- Hold down the ③ button until the display shows “oF:Su”
- The display automatically reverts to function mode.
The PARK LITE 2 is now ready to fit to the inside of the front windscreen.
NB: Only one parking disc can be used in the vehicle and the correct setting
of the parking disc is always the responsibility of the driver of the vehicle.
Needit ApS and importer will not reimburse any parking charges.
Fitting the PARK LITE 2
- Find a suitable spot on the inside of the windscreen where all 4 adhesive pads are in contact with the glass. When you do so, make sure that all the buttons on the back of the clock are accessible and you can easily change the battery. We recommend placing the disc in the lower right corner in the passenger side.
- Clean the inside of the windscreen in the area you have planned for the parking disc with glass cleaner or damp cloth. Wipe the glass dry carefully. You may use marking tape on the outside of the windscreen to help finding the best location for the device.
- Make sure that the screen is at least +15 °C, as the adhesive pads do not work correctly at lower temperatures. If necessary, warm up the windscreen using the vehicle’s fan or (very carefully) with a hair-dryer.
- Remove the protective film from the 4 adhesive pads and press the parking disc firmly against the windscreen for about 30 seconds. Do not press against the middle of the back. Then check from the outside that all 4 adhesive pads are sticking to the screen well.
- Your PARK LITE 2 is now installed and ready for use.
Warning:
The PARK LITE 2 must not be left loose in the vehicle, it must be fitted to
the windscreen in order to work properly.
How does PARK LITE 2 work
Approximately 20 seconds after you have parked your car PARK LITE 2
automatically starts to show the arrival time according to the settings.
Manual setting
Your PARK LITE 2 can also be set manually. If you wish to set your parking
time manually, e.g. to be started the next morning, simply press the ③ button
to move the clock forward at 30 minute intervals. Press the button down and
release once the desired time appears. Please note that this function is only
available if the PARK LITE 2 is in park mode.
Battery
If the diode ① starts flashing for 10 seconds when the PARK LITE 2 goes into
park mode or out of it, the battery needs replacing within a week. The battery
is commercially available. DO NOT FORGET TO SET THE CLOCK!
When you change the battery, the clock is automatically reset.
All settings need to be done as described above.
NB: The LCD display in your PARK LITE 2 will go out shortly after you remove
the battery, so you should not leave the vehicle while there is no battery in
the clock.
Replacing the battery
- You will need a new CR 2450 3 Volt battery.
- Carefully remove the whole battery holder.
- Remove the old battery.
- Insert the new battery with the + side upwards.
- Carefully replace the whole battery holder.
Service and guarantee
You can find answers to many questions on your new PARK LITE 2 on our website,
www.one-pro.fi or on your local importer’s home page.
Contact our customer service in case of any queries. The contact details are
in the end of this manual.
Needit ApS and importer provide a warranty according to the terms of the
European Sale of Goods Act. If faults or issues occur during the guarantee
period, PARK LITE 2 can be returned to the dealer from which the parking disc
was bought. The device can then be repaired or replaced. If you have any
complaints, please also provide a copy of your receipt as evidence of your
guarantee plaints, please also provide a copy of your receipt as evidence of
your guarantee.
Never attempt to open the PARK LITE 2, as this will damage the electronics and
invalidate the guarantee.
IMPORTANT Setting the parking disc correctly is the responsibility of the
driver of the vehicle. Needit ApS and importer will not reim-burse any parking
charges. Needit ApS shall also accept no liability for incorrect fitting or
settings.
Care and maintenance
PARK LITE 2 is well adapted to the Finnish climate and can withstand extreme
temperatures. PARK LITE 2 is tested below -35°C to over +75°C without
problems. However extended periods of very cold weather (-30 °C to -40 °C)
calls for attention to the battery when it reaches two years of usage, or if
the original battery is for some reason replaced with another type.
If the PARK LITE 2 comes into contact with high levels of humidity or water,
wipe it off immediately with a damp cloth.
Just use a cloth to clean the parking disc. Never use detergents.
Approvals and certificates
PARK LITE 2 is approved in many European countries and fulfils the
Communication Ministry’s regulation about parking discs and the terms to use
them (12.11.2015/1319 §1 – 4). In com-pliance with the Communication
Ministry’s decision on road traffic law 267/1981 28a § 3.
CE mark By affixing the CE mark, Needit ApS declares that this product
complies with the general safety regulations from the rele-vant CE mark
directives. With the CE mark, the manufacturer guarantees that the product has
been produced with the safety, health and safety and work and environmental
regulations valid across the EU.
Needit ApS hereby declares that this parking disc complies with the standards
set out in (CE) EN 50561 and EN 55035.
CE mark
By affixing the CE mark, Needit ApS declares that this product complies with
the general safety regulations from the rele-vant CE mark directives. With the
CE mark, the manufacturer guarantees that the product has been produced with
the safety, health and safety and work and environmental regulations valid
across the EU.
Needit ApS hereby declares that this parking disc complies with the standards
set out in (CE) EN 50561 and EN 55035.
WEEE Electrical and electronic components (EEE) and materials can be dangerous
and toxic to health and the environment and must be disposed of properly.
PARK LITE 2 must not be disposed of in normal domestic waste, special
precautions must be taken. The batteries can be given to battery distributors
and the PARK LITE 2 device itself can be disposed of via a local recycling
centre or by returning it to the point of sale.
Technical data and rights
Dimensions in cm: 10.0 x 7.2 x 1.8
Battery data:
Button cell no. CR 2450 – 3 Volts
Battery life expectancy: approx. 2 years
(average) clock accuracy: ± 2 min./2 years
Reaction time, park mode: approx. 20 seconds
Reaction time, not in park mode: approx. 20 seconds
Patented.
Copyright owner:
Needit ApS
www.needit.dk
Importer in Finland
Oy ONE-PRO Ab
Puutarhatie 20A
01300 Vantaa
Finland
Phone: +358 9 231 50050
www.one-pro.fi
www.needit.fi
www.1pro.fi
myynti@one-pro.fi
info@one-pro.fi
tuki@one-pro.fi
All rights reserved. Copyright: MK Oy One-Pro Ab 03-2022
Importer:
www.one-pro.fi
tuki@one-pro.fi
www.needit.fi
Importer:
www.proteam.ee
References
- Oy One-Pro Ab - Teknisen tukkukaupan asiantuntija
- NEEDIT elektroniske parkeringsskiver
- Etusivu - NeedIt
- Oy One-Pro Ab - Teknisen tukkukaupan asiantuntija
- proteam
- Download | Parklite
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>