SERVER 85310 Stainless Steel Pump User Manual
- June 13, 2024
- SERVER
Table of Contents
Stainless Steel Pump
MODELS INCLUDE:
CP-200 CP-F FP P-V FP-200 FP-200 DI FP-200V FP-1
1 /2 FP-DI FPV-DI TP-V TP-200V
Thank You
for purchasing our Stainless Steel Pump.
This quality NSF listed pump delivers precise portions and lasts for years of
service.
CONSISTENT PORTIONS—SERVE BETTER
Your pump may vary depending on specific model number.
PUMP PARTS
SAFETY
According to food and safety regulations, most foods must be stored and/or
served at certain temperatures or they could become hazardous. Check with
local food and safety regulators for specific guidelines.
Be aware of the product you are serving and the temperature the product is
required to maintain. Server Products, Inc. cannot be responsible for the
serving of potentially hazardous product.
IMPORTANT
Clean, rinse, sanitize, and dry parts daily or regularly to comply with local
sanitization requirements.
NSF International lists this pump as “Not acceptable for dispensing
potentially hazardous foods.”
Pumps 80090 & 81660 are NSF listed as part of a complete unit.
PUMP CLEANING
CLEAN-IN-PLACE PROCEDURE FOR PUMPS
CARE OF STAINLESS STEEL
This durable pump includes stainless steel components.
If you notice corrosion beginning on any stainless steel surface, you may need
to change the cleansing agent, sanitizing agent, or the cleaning procedures
you are using.
- A mildly abrasive nylon or brass brush may be used to remove any stubborn deposits.
- Fully rinsing and drying all parts can help prevent corrosion. Elements and minerals in tap water can accumulate on stainless steel parts and create corrosion.
- Do not use abrasive, caustic or ammonia based cleansers.
- Do not use products containing acids, alkalines, chlorine, or salt. These agents can corrode stainless steel.
- Do not use metal scrapers or cleaning pads that could scratch surfaces.
DISASSEMBLY
ASSEMBLY
WASH ALL PARTS PROPERLY BEFORE EVERY USE. See page 3.
TROUBLESHOOTING
PUMP DRIPS?
- Clean discharge tube with supplied brush.
- Inspect all o-rings. Replace if damaged.
- Food product may be too thin.
Visit www.Server-Products.com for more tips.
SERVER PRODUCTS LIMITED WARRANTY
2YEAR WARRANTY
This Server product is backed by a two-year limited warranty against defects
in materials and workmanship. See Server-Products.com for details.
GENERAL SERVICE, REPAIR OR RETURNS
Before sending any item to Server Products for service, repair, or return,
contact Server Products customer service to request a Return Authorization
Number. Merchandise must be sent to Server Products with this number. Service
is extremely prompt. Typically, units are repaired and ship out within 48
hours of receipt. Merchandise being returned for credit must be in new and
unused condition and not more than 90 days old and will be subject to a 20%
restocking charge.
NEED HELP?
Server Products Inc.
3601 Pleasant Hill Road
Richfield, WI 53076 USA
Chat with us!
spsales@server-products.com
262.628.5600 | 800.558.8722
Please be prepared with your Model, P/N and Series located on the lid or base
of the unit.
Manual 01588-RevG 072623
Documents / Resources
|
SERVER 85310 Stainless Steel
Pump
[pdf] User Manual
85310 Stainless Steel Pump, 85310, Stainless Steel Pump, Steel Pump, Pump
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>