fontastic AC080 Travel Charger Dubi User Manual

fontastic AC080 Travel Charger Dubi

Product Information

• The Travel Charger Dubi is a portable charger designed for charging electronic devices. It is manufactured by D-Parts GmbH, a company located at Birkenweiher Str. 16, 63505 Langenselbold, Germany. The model of the charger is AC080, and its article number/GTIN is 262869 / 4024559262869.
• The charger features USB-A and Type-C output ports, allowing you to charge multiple devices simultaneously. The USB-A output provides a voltage of 5.0V and a current of 2.4A, with a maximum output power of 12.0W. Similarly, the Type-C output delivers a voltage of 5.0V, a current of 2.4A, and a power output of 12.0W. The charger has an average active efficiency of at least 80.0%, ensuring efficient charging.
• For safety purposes, the charger is equipped with symbols to indicate potential risks and safety instructions. The risk of electric shock symbol warns about the possibility of contact with uninsulated parts carrying a dangerous voltage. The warning symbol alerts users to safety instructions and potential dangers. The note symbol provides additional information or important notes.
• To ensure the charger’s longevity and safety, it is recommended to disconnect it from the mains before cleaning or when not in use for an extended period.
• For technical support or assistance, you can contact the support team by sending an email to service@fontastic.eu.
• The charger complies with the CE mark and meets the requirements of the LVD Directive 2014/35/EU and the RoHS 2 Directive 2011/65/EU.
• Environmental protection is also emphasized, and it is stated that electrical and electronic devices should not be disposed of with domestic waste. Consumers are legally obligated to return them through appropriate channels.

Product Usage Instructions

1. Before using the charger, ensure that it is disconnected from the mains.
2. Connect the charger to a suitable power source using the provided cable.
3. Identify the appropriate output port (USB-A or Type-C) for your device.
4. Plug in your device’s charging cable into the corresponding output port of the charger.
5. Make sure your device is properly connected and charging begins.
6. Monitor the charging progress and disconnect your device once it reaches the desired charge level.
7. When not in use, disconnect the charger from the power source.

Note : The charger may undergo improvements or changes in technical specifications without prior notice. Always refer to the user manual for any updated information or instructions.

Thank you for choosing this Fontastic® product!
Please read the following user manual and keep them in a safe place so that you can refer to them at any time.

Explanation of the symbols

Risk of electric shock
This symbol indicates a risk of contact with uninsulated parts of the product which may carry a dangerous voltage of such a magnitude that there is a risk of electric shock.

Warning
Is used to mark safety instructions or to draw attention to special dangers and risks.

Note
Is used to mark additional information or important notes.

Package content

• Travel charger Dubi
• This user manual

Safety advice:

• Do not open the device.
• Do not hold the device underwater.
• Keep the device away from children.
• The socket in which the charger is operated must be freely accessible.
• Disconnect electronic devices from the power when not using them for a longer time.
• Do not use the device when it has visible defects.
• No commitment for any damage at misuse.

Charging devices

• Connect your device to the charger by using a suitable cable.
• Plug the charger into a properly installed and easily accessible mains socket.
• Disconnect the device from the charger when you want to interrupt charging or when the device is fully charged.
• Then disconnect the charger from the mains connection.
  Always disconnect the charger from the mains before cleaning and when not in use for long time.

Technical Data

Specification according to EU Regulation 2019/1782

No commitment for any damage at misuse.
In case you need technical support, please contact our support team by e-mail under service@fontastic.eu.

Note on environmental protection:
After the implementation of the European Directive 2012/19/

EU in the national legal system, the following applies:
Electrical and electronic devices may not be disposed of with domestic waste. Consumers are obliged by law to return electrical and electronic devices and batteries at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country.
This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations.
By recycling, reusing materials or other forms of utilizing old devices, you are making an important contribution to protecting our environment.

• We hereby declare that this device carries the CE mark by the regulations and standards.
• It conforms with the fundamental requirements of the LVD Directive 2014/35/EU as well as the RoHS 2 directive 2011/65/EU.
• The full text of the EU declaration of Conformity is available at the following internet address: www.d-parts.de/Konfo.
• Improvement and changes of the technical specifications and other data could be made without prior notice

Fontastic
® by D-Parts GmbH Birkenweiher Str. 16 63505 Langenselbold, Germany www.d-parts.de

References

• D-Parts GmbH

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>