INTELLINET 507356 IMCC-14 14 Slot Media Converter Chassis Instructions
- June 13, 2024
- INTELLINET
Table of Contents
INTELLINET 507356 IMCC-14 14 Slot Media Converter Chassis
Product Information
The Intellinet Network Solutions Media Converter Chassis (Model # 507356) is designed to accommodate up to 14 media converters in a single unit. It provides strong redundancy with two integrated power supplies and ensures a cool operating environment with two high-volume cooling fans. The chassis is electrically isolated from the next, allowing for safe and efficient media converter swapping.
Product Usage Instructions
Installation
- Remove the slot cover by turning the screw counter-clockwise.
- Attach the carrier bracket to the media converter. First, unscrew the two screws on the side of the media converter housing.
- Use these screws to affix the bracket to the media converter housing. You will need a Phillips head screwdriver.
- Note: Attach the bracket to the side of the media converter where the power plug is located. Check the rear of the media converter housing to determine which side the carrier brackets need to be connected to.
- Insert the Media Converter into the chassis and tighten the screw by turning it clockwise.
- Install the chassis in a standard 19 rack or cabinet. Connect both power supplies to a power outlet and set them both to the On position.
Maintenance
To dispose of the product, please follow the Waste Electrical & Electronic
Equipment (WEEE) disposal guidelines applicable in your region. Do not treat
the product as unsorted household waste. Contact your local municipality or
return the product to the point of sale for proper recycling.
Regulatory Statements
This equipment has been tested and found to comply with FCC Class A digital
device limits, pursuant to Part 15 of the Federal Communications Commission
(FCC) Rules.
Important: Read before use.
For additional benefits:
Scan to register your product warranty
or go to : register.intellinet-network.com/r/507356
Product Information
Product Overview
The Intellinet Network Solutions Media Converter Chassis (Model # 507356)
accommodates up to 14 media converters in a single unit. The media converter
Chassis allows hot-swapping the media converters and provides strong
redundancy due to its two integrated power supplies. Two high-volume cooling
fans ensure a cool operating environment.
Features
- High-quality 19” rackmount steel chassis
- Supports up to 14 stand-alone media converters
- Two internal 100 – 260V universal switching power supplies avoid network downtime and protect your converter investments
- Power supplies support load sharing, and circuit-breakers protect against over voltage and short circuits
- Two high-volume cooling fans ensure perfect ventilation
- Slot power isolation ensures each slot is electrically isolated from the next
Specifications
- Capacity: 14 slots for up to 14 media converters
- Occupies 2 height units (2U)
- Certifications: FCC Class A, CE
- LED for each power supply
- Power Input: 100 – 260 VAC, output: 5 VDC
- Material: aluminum/steel
- Dimensions: 440 (L) x 231 (W) x 90 (H) mm
- Operating temperature : 0 – 50°C (32 – 122°F)
- Operating humidity : 5 – 95% RH, non-condensing
- Storage temperature: -20 – 85°C (-4 – 185°F)
Package Contents
- Media Converter Chassis with 2 integrated power supplies
- 14 media converter carries brackets
- Installation instructions
Installation
-
Remove the slot cover by turning the screw counter clockwise.
-
Attach the carrier bracket to the media converter. First, unscrew the two screws on the side of the media converter housing, as indicated by the circles.
-
Next, use these screws to affix the bracket to the media converter housing. You will need a screw driver with a Phillips head (“crosshead”).
Note: You need to attach the bracket to the side of the media converter on which the power plug is located. Check the rear of the media converter housing to find out on which side the carrier brackets need to be connected to.
-
Insert Media Converter into the chassis, and then tighten the screw by turning it clockwise.
-
Install the chassis in a standard 19” rack or cabinet. Connect both power supplies with a power outlet and set them both to the On position.
Maintenance
- Always power on both power supplies by setting both power buttons to the On position. Doing so will significantly increase the life-span of the power supplies.
- At dangerous power levels, the rear POWER LED will turn red. Disconnect the chassis from the power at once.
- If the fuse on the rear has blown, the POWER LED will turn off.
- Disconnect the chassis from the power and replace the fuse. Power the chassis back on. If the fuse breaks again, discontinue use of the chassis at once.
- If one of the chassis fans stops working, discontinue use of the chassis at once. Contact your place of purchase concerning the possible warranty replacement.
- If a media converter stops functioning, try resetting the media converter in the chassis to ensure proper contact of the power connectors.
- If one of the power supplies has failed, do not attempt to replace it yourself. Contact your place of purchase concerning the possible warranty replacement.
WASTE ELECTRICAL & ELECTRONIC EQUIPMENT DISPOSAL OF ELECTRIC AND ELECTRONIC
EQUIPMENT (Applicable In The European Union And Other European Countries With
Separate Collection Systems)
This symbol on the product or its packaging means that this product must not
be treated as unsorted household waste. In accordance with EU Directive
2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), this
electrical product must be disposed of in accordance with the user’s local
regulations for electrical or electronic waste. Please dispose of this product
by returning it to your local point of sale or recycling pickup point in your
municipality.
WARRANTY AT
intellinet-network.com
REGULATORY STATEMENTS
FCC Class A
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the Federal Communications Commission
(FCC) Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. Any changes or modifications made to this equipment without the approval of the manufacturer could result in the product not meeting the Class A limits, in which case the FCC could void the user’s authority to operate the equipment.
CE/UKCA
This device complies with the requirements of CE 2014/30/EU (UKCA
Electromagnetic Compatibility Regulations 2016) and / or 2014/35/EU (UKCA
Electrical Equipment [Safety] Regulations 2016). The Declaration of Conformity
for is available at: support.intellinet-
network.com/barcode/507356
North & South America
IC Intercom Americas 550 Commerce Blvd. Oldsmar, FL 34677 USA
Asia & Africa
- IC Intracom Asia
- 4-F, No. 77, Sec. 1, Xintai 5th Rd.
- Xizhi Dist., New Taipei City 221, Taiwan
Europe
IC Intracom Europe Löhbacher Str. 7, D-58553 Halver, Germany
All trademarks and trade names are the property of their respective owners.
© IC Intracom. All rights reserved.
Intelligent Network Solutions is a trademark of IC Intracom, registered in
the U.S. and other countries.
Printed on recycled paper.
Documents / Resources
|
INTELLINET 507356 IMCC-14 14 Slot Media Converter
Chassis
[pdf] Instructions
507356 IMCC-14 14 Slot Media Converter Chassis, 507356 IMCC-14, 14 Slot Media
Converter Chassis, Converter Chassis, Chassis
---|---
References
- Intellinet Network Solutions - Provider of PoE and Data Center Product
- Intellinet Network Solutions Account and Product Registration
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>