Jabra Connect 5t Titanium Black True Wireless Earbuds User Manual
- June 3, 2024
- Jabra
Table of Contents
07/10/2022 13:00
Connect 5t Titanium Black True Wireless Earbuds
Jabra Connect 5t – Titanium Black
How do I pair my Jabra Connect 5t with my mobile device?
To pair your headset with your mobile device or tablet, follow these steps.
-
Turn on the Bluetooth setting on your mobile device.
-
Turn on your earbuds by removing them from the charging case. Alternatively, press the Left and Right buttons. The LEDs on both earbuds will turn green.
-
To enter pairing mode, simultaneously press and hold (3 seconds) the Left and Right buttons on the earbuds, until the LEDs on the earbuds flash blue.
The earbuds are now ready to pair with your mobile device.
Note If you want to use just one earbud, you must still pair
both earbuds with your mobile device. After the pairing, you can place one of
the earbuds in the charging case. -
To pair, go to the Bluetooth menu on your mobile device and select the Jabra Connect earbuds from the list. If the Jabra device is listed more than once, select the entry showing the headphone icon. Enter “0000” (four zeros) if you are asked for a PIN.
In daily use, when you turn on the earbuds, they will automatically reconnect with the last previously paired device, if it is turned on and within range.
Note Android users can also use Google Fast Pair to pair their headset
with their Android mobile device.
If pairing is not successful, try the pairing steps again, or try pairing with
a different Bluetooth device. For troubleshooting tips, see
here.
Optionally, try using the Bluetooth Pairing
Guide which provides detailed steps for pairing with a mobile
device.
References
- How do I pair my Jabra Connect 5t with my mobile device? | Jabra Connect 5t - Titanium Black | FAQ | Jabra Support
- What can I do if the pairing steps are not successful? | Jabra Elite 4 Active - Navy | FAQ | Jabra Support
- Get started with your Jabra Elite 4 Active - Navy | Jabra Support