AnkerMake V8110 M5C 3D Printer Installation Guide
- June 17, 2024
- AnkerMake
Table of Contents
AnkerMake V8110 M5C 3D Printer
Product Information
Specifications
- Model: AnkerMake M5C 3D Printer (Model V8110)
- Power: 115V
- Tube: PTFE feeding tube
- Extrusion Clip: Wi-Fi/Bluetooth indicator
- LED Indicator: Indicates Wi-Fi/Bluetooth status
- Ventilation Holes: Provides airflow for cooling
- Filament Holder: Holds the filament during printing
FAQ
- Q: What is the model number of the AnkerMake M5C 3D Printer?
- The model number of the AnkerMake M5C 3D Printer is V8110.
- Q: Where can I find the assembly guide for the printer?
- The assembly guide for the AnkerMake M5C 3D Printer should be included with the product. If you cannot find it, you can contact AnkerMake support for assistance.
- Q: What software should I use to prepare my 3D models for printing?
- The AnkerMake M5C 3D Printer is compatible with the AnkerMake Slicer software. You can download it from the official AnkerMake website at https://ankermake.com/software.
What In The Box
Product Overview
Installation Instructions
Operating And Using instructions
Powering On
Setting up the System
Leveling Heatbed
Warning
- Avoid moving the printer during the auto-leveling process.
Loading Filament
Tip: Straighten the filament at least 0.78 inches / 2 cm and cut the tip of the filament at a 45° angle.
Tip: Press and hold the extrusion clip while continuing to insert the filament. Stop when you feel some resistance.
AnkerMake Slicer
- For the best printing experience, download and install the AnkerMake Slicer to your computer from ankermake.com/software.
Printing
Limited Warranty
- 12-month limited warranty
Contacts
Lifetime technical support
- (US) +1 800-221-0126
- (UK) +44(0)1604 936200
- (Middle East & Africa) +971 520750842
- (UAE) +971 8000320817
- (Kuwait) +965 22069086
- (KSA) +966 8008500030
- (AU) +61 3 8331 4800
- [email protected]
- [email protected]
(Middle East & Africa)
Anker Innovations Limited
- Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
https://support.ankermake.com/s/
References
Read User Manual Online (PDF format)
Loading......