INTELLINET 508193 10GBase-T to 10GBase-R Media Converter Instructions
- June 13, 2024
- INTELLINET
Table of Contents
INTELLINET 508193 10GBase-T to 10GBase-R Media Converter
Product Information
The 10GBase-T to 10GBase-R Media Converter is a device that allows for the conversion between 10GBase-T Ethernet signals and 10GBase-R fiber optic signals. It is designed to provide a seamless connection between copper-based networks and fiber optic networks. The media converter requires an SFP+ transceiver module to provide the fiber optic connections.
Features
- Supports 10GBase-T Ethernet and 10GBase-R fiber optic connections
- Includes SFP+ slot for connecting the SFP+ transceiver module
- LED indicators for power, link/activity, and data transfer status
- Requires a 12 VDC, 1A power adapter
Specifications
- Power Input : 12 VDC, 1A
- Supported Network Speed : 10 Gbps
- Supported Network Interfaces : 10GBase-T (RJ45) and 10GBase-R (SFP+)
Compatibility
The media converter is compatible with various fiber optic cable types and
lengths, depending on the model. Please refer to the product specifications or
contact the manufacturer for more information.
Product Usage Instructions
- Insert the SFP+ transceiver module into the media converter.
- Install the fiber optic cable into the transceiver.
- Connect the other end of the fiber optic cable to an appropriate port in your fiber network.
- Plug the 12 VDC power adapter into the input jack on the media converter.
- Connect the power adapter to a regular power outlet.
Note: Make sure to use the included power adapter or one with matching specifications (output of 12 VDC, 1A).
LED Status
| LED | Status | Description |
|---|---|---|
| Power | Off | Power is off |
| Power | On | Power is on |
| LNK/ACT | Flashing | Data transfer is active |
| SD | On | Fiber signal detected |
| 10G | Off | No 10 Gbps connection |
| TX Link | On | Active copper connection |
| TX Act | Flashing | Copper data transfer is active |
For additional benefits
Scan to register your product warranty or go to: register.intellinet-
network.com/r/508193
For specifications, visit intellinet-network.com. Register your product at register.intellinet- network.com/r/508193 or scan the QR code on the cover.
Connections
Twisted Pair – RJ45
Connect the UTP port of the media converter to an RJ45 port on the network;
e.g., to an Ethernet switch. Cat5e or better cabling is recommended.
SFP+ Slot
This media converter requires an SFP+ transceiver module that provides fiber
optic connections.
- Insert the transceiver into the media converter. Next, install the fiber optic cable into the transceiver.
- Install the other end of the fiber optic cable into an appropriate port in your fiber network.
- Maximum length and fiber cable specification depend on the model.
LED Status
| LED | STATUS | STATUS DESCRIPTION |
|---|---|---|
| **Power** | Off | Power Off |
| On | Power On | |
| **LNK/ACT** | On | Active fiber connection |
| Flashing | Fiber data transfer | |
| SD | On | Fiber signal detected. |
| **10G** | On | 10 Gbps connection |
| Off | Less than 10 Gbps connection | |
| TX Link | On | Active copper connection |
| TX Act | Flashing | Copper data transfer |
Power
Plug the 12 VDC power adapter into the input jack on the media converter. Then
connect it to a regular power outlet. Only use the included power adapter or
one with matching specifications (output of 12 VDC, 1 A).
WASTE ELECTRICAL & ELECTRONIC EQUIPMENT
DISPOSAL OF ELECTRIC AND ELECTRONIC EQUIPMENT
(Applicable In The European Union And Other European Countries With Separate
Collection Systems)
This symbol on the product or its packaging means that this product must not
be treated as unsorted household waste. In accordance with EU Directive
2012/19/EU on Waste Electrical and
Electronic Equipment (WEEE), this electrical product must be disposed of in
accordance with the user’s local regulations for electrical or electronic
waste. Please dispose of this product by returning it to your local point of
sale or recycling pickup point in your municipality.
WARRANTY AT
REGULATORY STATEMENTS
FCC Class A
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the Federal Communications Commission
(FCC) Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio frequency
energy, and if not installed and used in accordance with the instruction
manual may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference,
in which case the user will be required to correct the interference at his own
expense. Any changes or modifications made
to this equipment without the approval of the manufacturer could result in the
product not meeting the Class A limits, in which case the FCC could void the
user’s authority to operate the equipment.
CE/UKCA
This device complies with the requirements of CE 2014/30/EU (UKCA
Electromagnetic Compatibility Regulations 2016) and / or 2014/35/EU (UKCA
Electrical Equipment [Safety] Regulations 2016). The Declaration of Conformity
for is available at
support.intellinet-network.com/barcode/508193
North America
- IC Intracom America
- 550 Commerce Blvd.
- Oldsmar, FL 34677, USA
Asia & Africa
- IC Intracom Asia
- 4-F, No. 77, Sec. 1, Xintai 5th Rd.
- Xizhi Dist., New Taipei City 221, Taiwan
Europe
- IC Intracom Europe
- Löhbacher Str. 7, D-58553
- Halver, Germany
All trademarks and trade names are the property of their respective owners.
intellinet-network.com
All trademarks and trade names are the property of their respective owners. ©
IC Intracom. All rights reserved. Intellinet Network Solutions is a trademark
of IC Intracom, registered in the U.S. and other countries.
References
- Intellinet Network Solutions - Provider of PoE and Data Center Product
- Intellinet Network Solutions Account and Product Registration