INTELLINET 561624 8-Port Gigabit Ethernet PoE+ Switch Instructions

INTELLINET 561624 8-Port Gigabit Ethernet PoE+ Switch

The Intellinet 8-Port Gigabit Ethernet PoE+ Switch with PoE Passthrough offers an array of time-saving, cost-effective features while providing superior network throughput. No configuration is required and installation is plug and play.

Features

• Supports up to 95 W power input from a PoE injector or switch (port 8)
• Provides up to seven PoE network devices with power and data (ports 1 – 7)
• Doubles the connection distance between PoE source and device from 100 m (328 ft.) to 200 m (656 ft.)
• Powered via PoE, DC power adapter or industrial power supply (not included)
• Two redundant DC inputs (48 – 57 V) with I/O terminal block

With a backplane speed of 16 Gbps, plenty of performance is available for your computers, servers and other networking devices. Each of the ports automatically senses the link speed of the connected network device and adjusts to 10, 100 or 1000 Mbps for compatibility and maximum performance. This PoE switch is designed to provide compatible devices with enough power when needed. It offers up to 30 watts of power per port until its power budget of 120 watts is reached.

For specifications, visit intellinet-network.com. Register your product at register. intellinet-network.com/r/561624 or scan the QR code on the cover.

 Front Panel

LED Color      Status                    Status Description

PWR| Green| On| Power on
Off| Power off
10 /1 OOM/1 OOOM| Green| On| Valid port connection
Blinking| Sending or receiving data
Off| No link established
PoE| Orange| On| The connected device is receiving power
Blinking| Abnormal power supply
Off| No powered device (PD) connected

DIP Switch — VLAN

OFF : default mode; allows normal communication between ports 1 – 8.
ON : isolates ports 1 – 7 from each other but allows them to connect to port 8; increases the forwarding rate when broadcast storms occur.

 Power

A) PoE Passthrough

BJ Terminal Block Installation

NOTE:

Ensure all power is off/disconnected before beginning!

1. Loosen appropriate screws.

2. Insert bare power-supply wires into appropriate terminal slots (positive wire into positive slot; negative wire into negative slot).
   

3. Tighten appropriate screws to secure wires. (If desired, repeat steps 1 – 3 on second input pair.)

4. Install block into the device and tighten screws.

 Placement

Desktop Installation

Prior to use, place/position the switch:

• on a level surface with at least 25 mm (approx. 1 “) of clearance for ventilation
• away from sources of electrical noise: radios, transmitters, broadband amplifiers within 100 m (approx. 328′) of network devices it’s to be connected to.

DIN-Rail Installation

1. With DIN-rail bracket attached to device with screws, angle bracket onto DIN rail.

2. Push device in till it clicks into place.

WASTE ELECTRICAL & ELECTRONIC EQUIPMENT

DISPOSAL OF ELECTRIC AND ELECTRONIC EQUIPMENT

(Applicable In The European Union And Other European Countries With Separate Collection Systems)

 This symbol on the product or its packaging means that this product must not be treated as unsorted household waste. In accordance with EU Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), this electrical product must be disposed of in accordance with the user’slocal regulations for electrical or electronic waste. Please dispose of this product by returning it to your local point of sale or recycling pickup point in your municipality.

WARRANTY AT

REGULATORY STATEMENTS

Class A

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the Federal Communications Commission (FCC) Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. Any changes or modifications made to this equipment without the approval of the manua facturer could result in the product not meeting the Class A limits, in which case the FCC could void the user’s authority to operate the equipment.

This device complies with the requirements of CE 2014/30/EU (UKCA Electromagnetic  Compatibility Regulations 2016) and / or 2014/35/EU (UKCA Electrical Equipment[Safety] Regulations 2016). The Declaration of Conformity for is available at:

Customer Support

support.intellinet-network.com/barcode/561624

North America
IC Intracom America
550 Commerce Blvd.
Oldsmar, FL 34677, USA
North America
IC Intracom America
550 Commerce Blvd.
Oldsmar, FL 34677, USA
Europe
IC Intracom Europe
Löhbacher Str. 7, D-58553
Halver, Germany

All trademarks and trade names are the property of their respective owners.

intellinet-network.com

All trademarks and trade names are the property of their respective owners. © IC Intracom. All rights reserved. Intellinet Network Solutions is a trademark of IC Intracom, registered in the U.S. and other countries.

 Printed on recycled paper.
INT_561624_QIG_0923_REV_5.11
NT_561624_QIG_0923_REV_5.11.indd 16

For additional benefits:

Scanto register your  product warranty [or go to: register.intellinet- network.com/r/561624

References

• Intellinet Network Solutions - Provider of PoE and Data Center Product
• Intellinet Network Solutions - Provider of PoE and Data Center Product
• Intellinet Network Solutions Account and Product Registration

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>