HALO SBL50A50GY Solar LED Dusk To Dawn And Motion Activated Area Light User Manual

IL51877723
Solar LED Dusk to Dawn & Motion Activated Area Light Instructions
WITH REMOTE MOUNTABLE SOLAR PANEL
SBL50A50GY
SBL100A50GY

IMPORTANT SAFETY INSTRUCTIONS

• Product is Wet Location rated for outdoor use only.
• Please read and understand this entire manual before attempting to assemble, install or operate this light fixture
• Save these instructions and warnings for future reference
• This product contains Lithium Ion rechargeable batteries that are NOT replaceable.
• Disassembling this fixture will void the manufacturer warranty
• The Halo Solar LED D2D & Motion Area light is not a toy. Keep it out of reach from small children.
• Please ensure the fixtured is installed where it can receive direct light from the sun.
• If using a step ladder, you may require a second person to help install the solar motion light.
• Before installation, lay out all components and check against the part list section in this manual.

WARNING
READ AND FOLLOW THESE INSTRUCTIONS
CAUTION: Please don’t look directly into the solar motion light when illuminated.
CAUTION: BURN HAZARD. Allow the light fixture to cool before touching.
NOTICE: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authorization to operate this equipment.
IMPORTANT: Please make sure the fixture is placed where the solar panel is exposed to optimal sunlight. Be aware of objects such as trees or property overhangs that may impede the light’s ability to generate a charge. Please make sure that the motion sensor is unobstructed for best results. Be aware that high-traffic areas will result in frequent motion events which could lead to the battery being depleted quickly. Monitor your specific installation and adjust as necessary.

PACKAGING CONTENTS

Hardware Kit (B) (Included)

Optional Accessories (Ordered Separately)
AAA – Replacement Remote – Catalog Number: SBL-RC
BBB – 16FT Extension Cable – Catalog Number: SBL-EXTCBL-16

ITEMS REQUIRED

(Purchase separately)

1. Philips Screwdriver
2. Safety Goggles
3. Adjustable Wrench
4. Work Gloves
5. Ladder
6. Power Drill

SPECIFICATIONS

MOTION SENSOR RANGE| SENSING ANGLE| LUMENS| POWER SPECIFICATIONS| OPERATING MODE| MOTION SENSOR TIME OUT SETTING
---|---|---|---|---|---
30FT| 180°| 50001m
OR
10000Im| Solar Panel and Rechargeable Lithium-ion phosphate Batteries (non- replaceable)
Battery Lifespan: 1500 Cycles| Motion, Dusk to Dawn, Motion +Dusk to Dawn,
Manual On, Manual Off| 30 seconds,
60 seconds,
90 seconds

PREPARING FOR INSTALLATION

REVIEW THIS INFORMATION TO ENSURE A REVIEW CONTENTS
Before installing the light fixture, take the contents out of the packaging and ensure that all parts are present. Compare parts with the hardware included and package contents sections. Do not attempt to assemble, install, or operate this light fixture if any part is missing or damaged.
ESTIMATED INSTALLATION TIME: 30 MINUTES
CHECK THE INITIAL BATTERY CHARGE

1. Prior to use, make sure batteries have been charged for 2 full days of sunlight. (The battery will require 8 to 12 hours of full, direct sunlight to completely charge.) Ensure the fixture is OFF by selecting that button on the included remote. If possible aim the solar panel located on the back of the fixture toward the South and tilt it approximately 50 degrees from horizontal.
2. Check the battery indicator light located in the fixture lens before install (see table below)
3. Actual operating time will vary depending upon how frequently the light is turned on by the motion sensor
4. Solar lighting is not designed to equal standard 120V lighting. The amount of light output is reduced to allow the sun time to fully recharge the battery between lighting cycles.
5. Solar collection is only effective in direct sunlight. Every hour the light is on requires a minimum of 5 hours of sunlight charging.

MOTION SENSOR

1. When deciding where to mount this fixture please keep in mind that the motion sensor that activates the light has a “field of vision” of 30ft in front of the light and about 180-degree detection angle at a surrounding air temperature of 77F.
2. The motion sensor will have a first-time use warm-up time of about 60 seconds. Please wait a minimum of 60 seconds after the first power-on before testing the motion sensor.
3. When testing the motion sensor performance during the daytime the solar panel will need to be covered to override the Dusk to Dawn functionality of the light fixture. Cover the solar panel fully using a piece of cardboard and tape for first time testing.

LED BATTERY INDICATOR GUIDE

FIXTURE STATUS| RED LED| GREEN LED| FIXTURE LED
Charging in progress (battery from 10% to 90%)| OFF| Blinking| OFF
Charging completed (Battery > 90%)| OFF| ON| Remains in the same state
Discharging in progress (battery from 90% to 10%)| OFF| OFF| Remains in the same state
Battery low (<10%)| ON| OFF| Remains in the same state
Motion mode selected| Remains in the same state| Remains in the same state| Blinks once when mode selected
D2D mode selected| Remains in the same state| Remains in the same state| Blinks 2 times when mode selected
Motion + D2D Modeselected| Remains in the same state| Remains in the same state| Blinks 3 times when mode is selected

INSTALLATION

1. When selecting the mounting location for this light fixture the most important thing to remember for the operation to work properly is that it works from the power received from direct sunlight. The solar panel works best when placed on the southern-facing portion, or the highest point, of a structure. The more direct sunlight the solar panel receives in a day, the longer the light will operate. Make sure there is a minimum amount of obstructions between the solar panel and the sun.
2. Mount at a maximum of 25ft high for best results.

Installation – Solar Panel Kit WALL MOUNT

1. Drill 2 Holes on the mount surface and insert the 2 Screw (EE) anchors into the Hole. Fig (1)
2. Use 2 Nuts & washer to mount the solar panel (C) onto the wall.

INTEGRATED MOUNT

1. Use 2 screws (EE) and washers to mount the solar panel to the fixture. Fig (2)

Installation – Fixture
WALL MOUNT

1. Drill 3 holes on the chosen mounting surface using the fixture arm as the template or the scale diagram. Fig (3)
2. Use the 3 included mounting lag screws (AA) with the 3 washers (BB) to secure the fixture into pre-drilled pilot holes. Ensure fixture is securely fixed to the wall. Fig (4)
3. Connect the solar panel to the light fixture by connecting and tightening the included 2.8ft cable.
4. If more distance between solar panel and light fixture is required a 16ft extension cable is available for purchase online.

POLE (TENON) MOUNT

1. Remove the pole mounting screw from the bottom of the fixture arm as pictured in Fig (5)
2. Slide the fixture onto the tenon pole (sold separately).
3. Using the screw you removed in an early step, re-attach in the same hole and tighten until the fixture is secured to the pole.
4. Connect the solar panel to the light fixture by connecting and tightening the included 2.8ft cable.
5. If more distance between solar panel and light fixture is required a 16ft extension cable is available for purchase online.

CONFIGURING AND TESTING SOLAR AREA LIGHT WITH THE REMOTE CONTROL

1. Remote comes with AAA batteries included.
2. When selecting a mode of operation for this light fixture with the included remote control, the fixture will continue to operate in the selected mode day after day. You don’t need to use the remote after configuring the light fixture to your desired settings. Only if making a change to the settings will the remote be required.

CARE AND CLEANING

• To prolong the original appearance, clean the light fixture with clean water and a soft, damp cloth only.
• Do not use abrasive cleaners or cleaners that contain alcohol. Do not apply paints, solvents or any other chemicals on this light fixture. They could cause a premature deterioration of the finish and may void the warranty.
• Do not spray the light fixture with a hose or power washer.

BATTERY MAINTENANCE

• This fixture comes with rechargeable batteries pre-installed and fully sealed inside the fixture.
• These batteries are not meant to be replaced.

TROUBLESHOOTING

reposition the unit away from the light source.
Fixture is not charging during the day.| • Solar panel must be receiving direct sunlight to charge during day (reposition if shadowed).
• Solar panel must be clean and free from debris.
• Make sure batteries have been charged for 2 full days of sunlight prior to turning the fixure ON.
• When battery is low, the fixture will automatically turn OFF until the battery is charged to the operating level.
Light comes on
for no apparent
reason at night| There is motion in the detection zone.| • Make sure the sensor is not picking up moving objects such as trees, traffic, etc.
• TEST FOR YOURSELF. Cover the sensor lens with black electrical tape to prevent sensor from detecting motion. If the light stays off, something in the detection zone is triggering the sensor.
• Reposition the fixture.
• If the light stays on with the sensor lens covered, contact customer service.
Light stays on at night and does not turn off| There is motion in the detection zone.| • Make sure the sensor is not picking up moving objects such as trees, traffic, etc.
• Reposition light fixture.
• If the light continues to stay on, contact customer service.

3-YEAR LIMITED WARRANTY

THE FOLLOWING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
Cooper Lighting Solutions warrants to customers that, for a period of three years from the date of purchase, Cooper Lighting Solutions products will be free from defects in materials and workmanship. The obligation of Cooper Lighting Solutions under this warranty is expressly limited to the provision of replacement products. This warranty is extended only to the original purchaser of the product. A purchaser’s receipt or other proof of date of original purchase acceptable to Cooper Lighting Solutions is required before warranty performance shall be rendered.This warranty does not apply to Cooper Lighting Solutions products that have been altered or repaired, that have been subjected to neglect, abuse, misuse or accident (including shipping damages). This warranty does not apply to products not manufactured by Cooper Lighting Solutions which have been supplied, installed, and/or used in conjunction with Cooper Lighting Solutions products. Damage to the product caused by replacement bulbs or corrosion or discoloration of brass components are not covered by this warranty.
LIMITATION OF LIABILITY: IN NO EVENT SHALL COOPER LIGHTING SOLUTIONS BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (REGARDLESS OF THE FORM OF ACTION, WHETHER IN CONTRACT, STRICT LIABILITY, OR IN TORT INCLUDING NEGLIGENCE), NOR FOR LOST PROFITS; NOR SHALL THE LIABILITY OF COOPER LIGHTING SOLUTIONS FOR ANY CLAIMS OR DAMAGE ARISING OUT OF OR CONNECTED WITH THESE TERMS OR THE MANUFACTURE, SALE, DELIVERY, USE, MAINTENANCE, REPAIR OR MODIFICATION OF COOPER LIGHTING PRODUCTS, OR SUPPLY OF ANY REPLACEMENT PARTS THEREFORE, EXCEED THE PURCHASE PRICE OF COOPER LIGHTING SOLUTIONS PRODUCTS GIVING RISE TO A CLAIM. NO LABOR CHARGES WILL BE ACCEPTED TO REMOVE OR INSTALL FIXTURES.
To obtain warranty service, please contact Cooper Lighting Solutions at 1-800-334-6871 or via e-mail ConsumerProducts@Cooperlighting.com and include the following information:

• Name, address and telephone number
• Date and place of purchase
• Catalog and quantity purchase
• Detailed description of problem

All returned products must be accompanied by a Return Goods Authorization Number issued by the Company and must be returned freight prepaid. Any product received without a Return Goods Authorization Number from the Company will be refused. Cooper Lighting Solutions is not responsible for merchandise damaged in transit. Repaired or replaced products shall be subject to the terms of this warranty and are inspected when packed. Evident or concealed damage that is made in transit should be reported at once to the carrier making the delivery and a claim filed with them.
Reproductions of this document without prior written approval of Cooper Lighting Solutions are strictly prohibited.
For assistance, call 1-800-334-6871 or e-mail us at ConsumerProducts@Cooperlighting.com
Printed in China

Solar LED Dusk to Dawn & Motion Activated Area Light Instructions
www.cooperlighting.com
Cooper Lighting Solutions
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
© 2023 Cooper Lighting Solutions
All Rights Reserved
Printed in USA
Imprimé aux États-Unis
Impreso en los EE. UU.
Publication No. IL51877723
March 2023
Cooper Lighting Solutions is a registered trademark.
All trademarks are property of their respective owners.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>