Gude 38354 Mechanical Belt Winch Instruction Manual

June 13, 2024
Gude

Gude 38354 Mechanical Belt Winch

Please read the instructions carefully before starting the machine.

DELIVERED ITEMS

Assembly

Starting-up the machine

Operation

Technical Data

Belt winch GGHW 540/8 GGHW 900/8
Art. No 38354 38355
Max. pulling force 540 kg 900 kg
Belt length 8 m 8 m
Weight 2,8 kg 4,75 kg
  • Read and understand the operating instructions before using the appliance. Familiarise with the control elements and how to use the appliance properly. Abide by all the safety measures stated in the service manual. Act responsibly toward third parties.
  • The operator is responsible for accidents or risks to third parties.
  • In case of any doubts about connection and operation refer please to our customer center
  • Persons over 16 years of age can only work on the appliance. An exception includes youngsters trained in order to reach knowledge under the supervision of the trainer during occupational education.
  • This appliance has not been designed to be used by persons (including children) with reduced physical, sensory or mental capabilities or with a lack of knowledge or experience.
  • Children must be supervised in order not to play with the machine.

Specified Conditions Of Use

  • The winch is designed to move and pull heavy loads in accordance with the technical specifications.
  • The winch must not be used to move fixed or jammed loads or as a lifting device.
  • The winch must not be used in combination with pulleys.
  • The device is not approved for use in hazardous areas.
  • Temperature range: -10 °C – +50 °C
  • Loads may not be pulled diagonally using winches intended for lifting and lowering suspended weights.
  • Secure the winch only on components that can withstand the maximum pulling force of the winch in any case.
  • Do not use this product in any other way as stated for normal use. Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for damages.

Residual risks
Even when the device is used properly and all safety regulations are complied with, there still may be some residual risks.

Emergency procedure
Conduct a first-aid procedure adequate to the injury and summon qualified medical attendants as quickly as possible. Protect the injured person from further harm and calm them down. If you seek help, state the following pieces of information: 1. Accident site, 2. Accident type, 3. Number of injured persons, 4. Injury type(s)

Symbols

Safety Warnings Cable winch

  • Do not use the winch to lift loads! The winch must only be used for pulling loads, e.g. for recovering vehicles or for pulling/lowering boats onto trailers.
  • Do not overload the winch!
  • Do not move loads that could roll or fall over by themselves. If necessary, take action to avoid this.
  • Never stand directly behind or above the winch when the rope is taut. Instead, stand to the side at a  90° to the winch.
  • Never stand on or above the taut rope.
  • Avoid remaining in the hazard area and ensure that others are also not at risk.
  • Turn the hand crank manually.
  • Keep your hands away from the load-bearing wire rope or other parts of the winch during operation. Wear gloves!
  • If you are pulling heavy loads, hang a  cover or jacket over the wire rope about 1-2 m ahead of the towing hook. This significantly reduces the danger posed if the wire cable breaks.
  • At least three full turns of rope must remain on the roll under load! Otherwise, the wire rope can break away from the anchoring if it is completely rolled out.
  • Make sure that the wire rope is wound neatly, turn for turn,  without knots and loops on the rope drum.
  • After winding in the wire cable, the flanged wheel protrusion of the rope drum must be at least 1.5 times the rope diameter.
  • Keep children and bystanders away while operating a device.
  • People or animals must not be transported.
  • Wear suitable protective clothing such as sturdy shoes with non-slip soles, robust long trousers, gloves, and safety glasses!
  • Do not wear loose clothing or jewels. Hear, clothing, and gloves must be out of reach of moving parts as they could get caught by the rotating parts. Do not use the appliance when barefoot or in open sandals.
  • Do not overreach. Keep proper footing and balance at all times.
  • Do not use the appliance in bad weather, especially when there is a risk of storm.
  • Provide adequate lighting or good lighting conditions when working with the machine.

Warning
The protective equipment on the appliance is strictly prohibited from being disassembled, changed, or used in conflict with the designation and it is prohibited to attach any protective equipment of other manufacturers.

Maintenance

  • Check all screw and plug-in connections and protective equipment if firm and tightened properly and whether all moving parts are running smoothly whenever the appliance is to be put into operation.
  • The appliance must not be used if damaged or safety equipment is defective. Replace any worn-out and damaged parts.
  • Before using the winch, check that the cable is in good condition and ensure that the lifting accessories used to secure the load are approved for the load and in perfect condition.
  • Check the cable for kinks, knots, cracks or other damage. If the wire cable is damaged, bent or the hook is missing, or if the wire cable shakes under load,  stop using the winch.
  • The life of the wire cable and the winch is limited; worn parts must be replaced in good time.
  • Have an expert check the equipment at least once a year.
  • Repairs and works specified in these Instructions may only be performed by qualified authorized staff.
  • Use only original accessories and original spare parts.
  • Keep the cable clean and lightly oiled.
  • Keep the device, in particular the air vents, clean at all times. Never spray water on the device’s body! Do not clean the plastics with solvents, or flammable or toxic fluids. For cleaning, use a damp cloth only.
  • Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insufficient maintenance and care can lead to unforeseen accidents and injuries.
  • If necessary, a list of spare parts can be found at www.guede.com.
  • The machine to be stored in a dry place.

Guarantee

The warranty period of 12 months applies to commercial use and 24 months applies to private use and commences on the day of purchase of the device. The guarantee solely covers inadequacies caused by material defects or manufacturing defects. An original payment voucher with the date of the sale needs to be submitted for any claim in the guarantee period. The guarantee does not cover any unauthorized use such as appliance overloading, use of violence, or damage as a result of any unauthorized interference caused by foreign items. Failing to follow the operating and assembly instructions and common wear are also not included in the guarantee.

Important information for the customer
Please be sure to know that returning the product in or after the warranty period must be made in the original packaging.

Service

Do you have any technical questions? Any claim? Do you need any spare parts or operating instructions? We will quickly help you and without needles bureaucracy at our web pages at www.guede.com in the Servicing part. Please help us be able to help you. In order to identify your device in case of claim we need the serial No., product No. and year of production. All this data can be found on the type label

Tel.: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guede.com.

Translation of the EC-Declaration of Conformity We, hereby declare the conception and construction of the below-mentioned appliances correspond – at the type of construction being launched – to appropriate basic safety and hygienic requirements of EC Directives.
In case of any change to the appliance not discussed with us the Declaration expires.

Belt winch
38354 | 38355 GGHW 540/8 | GGHW 900/8

Appropriate EU Directives

Harmonized standards used
EN 13157:2004/A1:2009

Guaranteed sound power level

Measured sound power level

Method of compliance assessment

Annex VI Managing Director
Authorized to compile the technical file

GÜDE GmbH & Co. KG
Birkichstrasse 6
74549 Wolpertshausen
Deutschland
Tel.: +49-(0)7904/700-0
Fax.: +49-(0)7904/700-250
eMail : info@guede.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals