Eurofase Lighting 46630-018 Khaki Aden 46 Tall Column Outdoor Lamp Installation Guide
- June 13, 2024
- EUROfase LIGHTING
Table of Contents
Eurofase Lighting 46630-018 Khaki Aden 46 Tall Column Outdoor Lamp
Product Information
- Product Model: 46630-018
- Maximum Wattage: 40W
- Type: A
- Power Input: 120V~, 60Hz
Product Usage Instructions
- Before installation or removal, always unplug the lamp.
- Approved Location for use: Wet/outdoor location
- Assembly Time: 10 Minutes
- To adjust the height and protect the product from direct contact with water on the bottom, use the levelers.
- Cleaning and Care:
- Periodically wipe the lamp with a soft, dry cloth.
- Avoid using harsh or abrasive chemicals as they may damage the finish.
- Assembly Steps:
- Fixture
- Bulb (not included)
- Gasket
- Threaded Globe
- Top Nut x3
- Floor Lamp Base
- Shade
- Assemble Shade (G) with Floor Lamp Base (F):
- Keep the shade placed horizontally on the floor.
- Insert the floor lamp base into the shade.
- Once the shade and floor lamp base are properly inserted together, tighten the floor lamp base with the shade from the bottom side using the top nuts.
- After assembly, plug in the lamp for use.
- Cleaning and Care:
- Periodically wipe the lamp with a soft, dry cloth.
- Avoid using harsh or abrasive chemicals as they may damage the finish.
Thank You
You’ve just purchased a lighting product designed and built to provide you
with years of enjoyment.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
- Follow the assembly instructions by reading the numerical order.
- This Lamp has a Three-prong polarized plug as a feature to reduce the risk of electric shock.
- This plug will fit in a polarized outlet only one way. If it does not fit, contact a qualified electrician.
- Never use an extension cord unless the plug can be fully inserted. Do not alter the plug.
- The product must be installed according to applicable codes(S) by a person familiar with its construction and operation.
- This Lamp socket is rated up to 40 Watt MAXX Type A Bulb (not included). LED recommended.
- Wipe with dry cloth before inserting the plug into the socket and globe.
- The socket should be dry before inserting the bulb.
40W MAX, TYPE A, 120V~, 60Hz
Bulb not Included
- Unplug the lamp prior to installation or removal.
Disclaimer: Tight the threaded globe carefully along with the Gasket to prevent water entry inside the Globe.
Approved Location for use: Wet/outdoor location
Assembly Time: 10 Minutes
To adjust the height & protect the product from direct contact with water on the bottom
Cleaning and Care
- Periodically wipe the Lamp with a soft, dry cloth. Avoid harsh or abrasive chemicals as finish damage may result
- A- Fixture
- B- Bulb (not included)
- C- Gasket
- D- Threaded Globe
- E- Top Nut x3
- F- Floor Lamp Base
- G- Shade
ASSEMBLE SHADE (G) WITH FLOOR LAMP BASE
Keep Shade Placed Horizontally On Floor And Insert Floor Lamp Base (F) Into Shade. Once Shade (G) and floor Lamp Base are inserted properly Together, Tighten the Floor Lamp Base With Shade From the Bottom Side With the Help Of Top Nuts (E)
Assembled
- Unplug the lamp prior to installation or removal.
Cleaning and Care
- Periodically wipe the Lamp with a soft, dry cloth. Avoid harsh or abrasive chemicals as finish damage may result.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>