StarTech com 135S Privacy Screen for 13.5 Surface Laptops User Guide
- June 13, 2024
- StarTech com
Table of Contents
StarTech com 135S Privacy Screen for 13.5 Surface Laptops
Product Information
- Product Name: Privacy Screen for 13.5 Surface Laptops – 3:2 Aspect Ratio – Touch Support
- Product ID: XXXSX-PRIVACY-SCREEN
- Function: The privacy screen is designed to protect the screen of a 13.5 Surface Laptop from prying eyes by limiting the viewing angle.
Warranty Information: This product is backed by a two-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Product Usage Instructions
- Clean the Screen and Bezels using the Wiping Cloth.
- Select the side of the Privacy Filter intended to Face Outward (i.e. high matte or low matte side). Place the Privacy Filter on a clean and flat surface with the selected side Facing Down.
- Remove all Adhesive Strips from the Transparent Lining.
- Carefully align the Adhesive Strips along the Top, Bottom, Left, and Right edges of the Privacy Filter. Apply Firm Pressure to affix them to the Privacy Filter.
- Carefully remove the Protective Backing from the Adhesive Strips.
- Attach the Privacy Filter to the Screen, starting from the Bottom and working towards the Top. The Adhesive Side should face toward the Screen.
- Apply Gentle Pressure on the Locations where the Adhesive Strips were installed.
- Clean any fingerprints on the Privacy Filter using the WipingCloth.
Note: The Adhesive Strips become less effective with frequent removal/reapplication.
Package Contents
- Privacy Screen x 1
- Set of Adhesive Strips x 1
- Sleeve x 1
- Wiping Cloth x 1
- Quick-Start Guide x 1
OVERVIEW
| Component | Function |
|---|---|
| 1 | Privacy Filter |
greater than 30° off-center from the Left or Right
• The total Field of View is 60 degrees
2| Adhesive Strips (Not Shown)| • Secure the Privacy Filter to the Screen surface
Note: The Adhesive Strips become less effective with frequent removal/reapplication
3| Camera Notch| • Prevents obscuring the built-in camera
Requirements
For the latest manuals, product information, technical specifications, and
declarations of conformance, please visit:
www.startech.com/support
Install the Privacy Filter
- Clean the Screen and Bezels using the Wiping Cloth.
- Select the side of the Privacy Filter intended to Face Outward (i.e. high matte or low matte side). Place the Privacy Filter on a clean and flat surface with the selected side Facing Down.
- Remove all Adhesive Strips from the Transparent Lining.
- Carefully align the Adhesive Strips along the Top, Bottom, Left, and Right edges of the Privacy Filter. Apply Firm Pressure to affix them to the Privacy Filter.
- Carefully remove the Protective Backing from the Adhesive Strips.
- Attach the Privacy Filter to the Screen, starting from the Bottom and working towards the Top. The Adhesive Side should face toward the Screen.
- Apply Gentle Pressure on the Locations where the Adhesive Strips were installed.
- Clean any fingerprints on the Privacy Filter using the Wiping Cloth.
Regulatory Compliance
Use of Trademarks, Registered Trademarks, and other Protected Names and
Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way
to StarTech.com. Where they occur these references are for illustrative
purposes only and do not represent an endorsement of a product or service by
StarTech.com, or an endorsement of the product(s) to
which this manual applies by the third-party company in question. StarTech.com
hereby acknowledges that all trademarks, registered trademarks, service marks,
and other protected names and/or symbols contained in this manual and related
documents are the property of their respective holders.
Warranty Information
This product is backed by a two-year warranty. For further information on
product warranty terms and conditions, please refer to
www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP
(or their officers, directors, employees or agents) for any damages (whether
direct or indirect, special, punitive, incidental, consequential, or
otherwise), loss of profits, loss of business, or any pecuniary loss, arising
out of or related to the use of the product exceed the actual price paid for
the product. Some states do not allow the exclusion or limitation of
incidental or consequential damages. If such laws apply, the limitations or
exclusions contained in this statement may not apply to you.
StarTech.com Ltd.
45 Artisans Crescent
London, Ontario
N5V 5E9
Canada
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Road Brackmills,
Northampton
NN4 7BW
United Kingdom
StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support