ILM 902BT Motorcycle Helmet Modular Instruction Manual

ILM 902BT Motorcycle Helmet Modular

IMPORT ANT NOTICE!

• If your helmet size is not right.
• Please contact our customer service with your order number and we will send you a replacement liner for your helmet.
• The helmet is damaged in transport/the wrong helmet.
• Please contact our customer service with a picture of the issue.
• Any of the helmet accessories are missing/not working properly. Please contact our customer service and we will reply replacement parts (if still under warranty: 5 year).
• If you are unsatisfied with the delivery time.
• Please contact our customer service representative.
• HOMEPAGE–HELP–NEED MORE HELP–CONTACT US

THANK YOU FOR CHOOSING ILM

• The helmet you have just purchased is the result of many years of business experience and commitment from ILM.
• ILM and its employees are committed to developing and building helmets for maximum security and reliability to its owner, based on extensive and up-to-date tests. The design and engineering behind our helmets always have the best materials and technology solutions in mind.
• Made for everyday use as well as sports.
• Our attention to security and comfort allows you to enjoy the best driving experience.

WARNING

1. The helmet does not ensure absolute safety in case of accident. Before using the helmet, please check that the related accessories are in good condition and right position.

2. For your maximum safety, the helmet should always be fitted well and the restraint system must be properly tightened.
   With the restraint properly in place, the odds are low that the helmet would be removed from the head in case of accident. The belt must be positioned under the chin and tightened so as to remain in place throughout its use.
   The law requires that the helmet is always tight.

3. Do not stick anything on the helmet that is not designed and constructed to be so. Do not drill holes or cuts in the cap. Do not modify the helmet in any way or its components as it thereby weakens the structure and

4. threatens to undennine its ability to protect. For the same rea,;;on, do not repaint the helmet, not paste stickers, do not use abrasive cleaners and other solvents.

5.  The inner liner and cap are vital to performance protective helmet.

6. The helmet tends to age with time and use: We recommend replacing your helmet when it shows obvious signs of deterioration to its components, cracks, rust, product not comfortable, poor condition of the components. In any case, we advise that the effectiveness of a helmet is up to 5 years after purchase.

CARE AND MAINTENANCE OF THE HELMET

• The helmet must be treated and handled with care to maintain the integrity of the security functions. To clean the shell and liner of the helmet, use a product specifically for the purpose. if you have no such products, you can use a soft cloth moistened with mild soap and warm water. For interior non-removable internals and internal EPS, a soft cloth moistened with mild soap and warm water is also acceptable. To rinse, use a soft damp cloth.
• The removable interior can be washed by hand or machine wash in warm water(max.35°) and mild soap. The internal parts must always be left to dry in the open air without being exposed to heat.
• Before using the helmet again after cleaning, make sure all parts are completely dry in order to avoid unpleasant odors or mold.
• Never use gasoline, benzene or other type of chemical solvent product because they can damage the operation and structure of some components of the helmet and weaken the protective functions.
• For the same reason, we advise you not to repaint the helmet, since the solvents present in paints can damage the materials that make up the helmet. Do not modify in any way the helmet(e.g.,practicing holes or
• cuts in the shell,pressing the internal EPS, focusing restraint systems or internal parts) as it will cause the structure to weaken and threatens to undermine the protective capabilities. If necessary you should replace a component.
• Use original parts [LM, directing your dealer.
• Avoid any behaviors or uses of helmet that can hurt performance:
• Do not put the helmet on the pedestals of mirrors or banks to avoid damaging the liner to even falls.
• Do not sit on the helmet in places such as reservoirs and seat of the bike, where it can easily fall and be damaged. For the same reason, keep the helmet out of the reach of children and animals as it can also lead to damage.
• Do not remove at all structural parts of the helmet, as the icecap internal belt, accessories.
• Do not expose the helmet to intense sunlight.

RESTRAINT SYSTEM

To secure the helmet, follow the figure: passing the tape between the rings, push the safety button on your site.
To remove, follow instructions in reverse order of tightening.

FAST RELEASE BUCKLE

• To secure the helmet, follow the instructions of the figure: Place the socket on the retention mechanism until it clicks. To open the system, press the red button.
• The system needs a micrometric regulation buckle adjustment before being tight.
• To secure the helmet, follow the instructions of the figure: Insert tab-toothed belt metal and push to feel the belt press against the jaw, putting the piece in as necessary.
• To open the system, lift the red lever, assisting with the small fabric ribbon and pull the buckle in the opposite direction to grip.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>