viveroo loop iPad Wall Mount Rotatable Installation Guide
- June 9, 2024
- viveroo
Table of Contents
viveroo loop iPad Wall Mount Rotatable
Product Information
The product is a loop that can be installed in furniture and walls for various purposes. It comes with mounting options, installation and cutting measurements, and technical data. The loop requires a power supply of 12Vdc when installed in furniture, and 110-230Vac when installed in walls. The product contents include a user manual, power supply, mounting materials, and electrical connections.
Mounting Options
- Overlying mounting
- Flush mounting
Overlying mounting
What do you need? MountingSet Inwall Article 210200 incl. flush mount box,
power supply and mounting material
perfect flush to the wall“ installation
What do you need? MountingSet Inwall ZERO Article 210221 Incl. MountingSet
Inwall. Incl. flush mount frame and reinforcing grid
Installation Measurements
Furniture
For installation in furniture, cabinets, wooden materials displays etc., in mm
- Installation without flush mount box
- Direct screw-mounting
- Cutting measurements: a = 9 for overlying mounting, a = 0 for
flush mounting
Walls
Installation in drywall, stone or solid wall, in mm
- Installation with flush mount box
- Attach loop to flush mount box
- Cutting measurements are provided in the user manual
Technical Data
- Weight : 4.8 kg
- Low voltage : 10-18 Vdc
- Power consumption: 15 Watt
- All loops have CE certification and are made in Germany with high-quality parts and components produced by market leaders.
loop
-
Product contents
- User manual loop
- loop
Please note! External cable, power supply and mounting screws are included in loop MountingSet.
-
Compatibility Electrical operation of loop is permitted only in connection with loop Mounting Set and power supply and cable included in the Mounting Set. Operation of loop without a Mounting Set will lead to immediate loss of guarantee and warranty.
-
Weight 4,8 kg
-
Electrical connections
- Low voltage : 10-18 Vdc
- Power consumption : 15 Watt
-
Disconnect from power supply The loop can be disconnected from the main voltage through the ground wire of the room.
-
CE & Co. All loops have CE certification. loop is quality “Made in Germany”. We use only high-quality parts and components produced by market leaders. loop customers are proud of their iPad Garage. Technical changes and mistakes are excepted.
MountingSet Furniture
Product contents
- Cutting measurements for installation in furniture
- Power supply (IN 200-240 Vac, 50 Hz, OUT 12 Vdc) especially for furniture installation, incl. separate instruction manual
- 5m connection cable (to connect power supply and loop)
- 1m power supply cable (to connect power supply and wall socket)
- Spax-S back panel screws: 4 pieces 3×25 and 4 pieces 3,5×25
Electrical connections
- Voltage : 200-240 Vac, 50 Hz
- Power consumption : 15 Watt
- Please note the operating instructions of the power supply.
MountingSet Inwall / MountingSet Inwall ZERO
Product contents
- Installation guide Inwall
- loop flush mounting box with installation disc (rotating disc), incl. integrated level
- Power supply (IN 100-240 Vac, 50 – 60 Hz, OUT 12 Vdc) with pre-installed loop power cable (including usage guidelines and installation guide)
- Fastening screw packet (for attaching loop) with various length screws (see „Installation“ section)
- For MountingSet Inwall ZERO: Installation guide. Flush mount frame with reinforcing grid
Electrical connections
- Voltage : 230 Vac, 50-60 Hz
- Power consumption : 18 Watt
- Please note the operating instructions of the power supply
Product Usage Instructions
The loop requires a power supply and mounting set for proper electrical operation. Do not use the loop without a mounting set as it will lead to immediate loss of guarantee and warranty. Follow the below instructions for product usage:
Installation in Furniture
- Measure and mark the cutting measurements for installation in furniture.
- For flush mounting, use a = 0 and attach the loop directly to the furniture with screws. For overlying mounting, use a = 9 and install the loop without a flush mount box using direct screw-mounting.
- Connect the loop to the power supply included in the MountingSet Furniture Article 210300.
- Installation without flush mount box.
- Direct screw-mounting.
- Power supply : 12Vdc
For installation in furniture, cabinets, wooden materials displays etc., in mm
Installation in Walls
- Measure and mark the cutting measurements for installation in drywall, stone or solid wall.
- Install the loop with a flush mount box by attaching it to the box using screws.
- Connect the loop to the power supply included in the MountingSet Inwall Article 210200, or MountingSet Inwall ZERO Article 210221 if you want to achieve a perfect flush-to-the-wall installation.
- Installation with flush mount box.
- Attach loop to flush mount box.
- Power supply : 110-230Vac
What do you need?
MountingSet Furniture Article 210300 incl. power supply and mounting materials
Cutting measurements Furniture
For installation in furniture, cabinets, wooden materials displays etc., in mm
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>