Gaabor GE-M03D Egg Beater Instruction Manual
- June 13, 2024
- Gaabor
Table of Contents
Gaabor GE-M03D Egg Beater
Features
- Unique appearance of simple and compact, comfortable holder, wireless portable design.
- Double-dick the switch button to turn on the machine, adjust speed with one button, simple and convenient.
- Equipped with food-grade stainless steel cooking stick, stainless steel blades, easy to clean.
Structure
- Double-dick the 11switch button” to start the product (low-speed gear).
- Continue to click the 11 switch 11 once to enter the medium-speed, and then click the 11 switch 11 once to enter the fast-speed, click the 11switch 11 for the third time to stop working.
- Follow the above step 1 and 2 to operate circularly.
Technical Parameters
Model | Input voltage | Battery capacity | Rated power | Rated capacity |
---|---|---|---|---|
GE-M03D | DC5V | 1200mAh | 20W | 0.3L |
Operation Method
- Clean the mixing stick, cup and blade before use;
- Put the ingredients to be stirred into the container;
- Please ensure that the product is not in working slate before inserting accessories, and the indicator light should not be on at this time;
- Insert the mixing stick into the head socket until it clicks.
- Click the switch button to tum off the machine after the mixing is completed (working light off); then pull out the mixing stick for cleaning.
- When using the blade to cut vegetables, insert the knife into the cup along the axis in the cup, and then put the food into the cup.
- Install the positioning cover along the two slots on the cup after placing the food.
- Insert the connecting shaft into the host, and put the host into the cup along the positioning intermediate ring.
- Double click the 11Power11 switch to start cutting vegetables.
- When the knife gets stuck or doesn1t work, please take some food out of the cup.
State | Indication |
---|---|
Charging | Red light flashing |
Working | Blue light is always on |
Charged | Blue light is always on |
Out of power | Red light flashes far 10 seconds |
Precautions
- This product is for wireless use. Please charge this product before the first use.
- The machine needs to be cooled for 15-20 minutes after 5 minutes of continuous operation, otherwise the service life of the machine will be shortened due to overheating.
- Do not use metal brush, nylon brush, detergent, thinner and other products to clean the machine.
- Do not disassemble the host without authorization, squeeze, puncture, short circuit or put it into water, fire or in an environment with a temperature higher than 60 t:.
- Please use this product in an environment with a temperature of 0-40 t:; Please charge every three months when not in use for a long time to prevent battery damage; Please charge in time if the battery is insufficient.
- Please turn off the machine before installing and plugging the mixing stick or blade or cleaning.
- Please use the accessories attached to the machine to avoid unnecessary injury.
- Please ensure that all parts are installed completely and locked without looseness before using the machine.
- Please do not put this product and accessories into the dishwasher, microwave oven, disinfection cabinet or hot water above 60 C for cleaning or disinfection, and do not use other equipment to heat this product to avoid deformation and damage.
- Please do not place this product where children can reach, and do not let children and people lacking relevant knowledge and experience, people with physical disabilities, perception or mental disorders use or play with this product.
- Do not let fingers, clothes, hair, etc. touch rotating parts when the product is working.
- This product is only suitable for personal or family use, not for commercial use.
- Do not repair or refit this product by non-professional maintenance personnel to avoid fire, electric leakage and machine abnormality.
FAQ
Failure | Indicator light | Cause | Troubleshooting |
---|---|---|---|
Spilled ingredients or stuck cutting blade during mixing | Red and blue | ||
Flashing alternately | Is there too much food materials | Shut down the machine |
and take out some food materials
It does not work after double dicking the switch button| The red light is
always on| Battery is out of power| Charge the hast
The blue light is on| The motor is damaged or stuck| Turn the motor shah. If
it still does not start, please send it to the nearest maintenance point for
inspection
It does not work otter double dicking the switch button| The light is not on|
Check whether the charging cable is loose| Replace the charging cable with a
new one
The motor gives off an unpleasant smell during the first few times of use| |
Normal phenomenon of new motor in initial use| If it still emits this smell
after repeated use, please send it to the nearest maintenance point for
inspection
Note : The above are common failure analysis and troubleshooting methods. For other failures, please contact the dealer or go directly to the maintenance point designated by our company for maintenance and inspection. Do not disassemble and repair without authorization.
Cleaning And Maintenance
- The product can be washed directly with water or wiped with a soft damp cloth.
- Please put proper amount of detergent in dean water and use a cleaning pad to clean the product. It is recommended to use warm water for better effect.
- Do not use abrasive or corrosive detergent for cleaning.
- It is strictly prohibited to sterilize all parts of this product at high temperature.
- Please wipe or air dry the parts after cleaning the products, and then reassemble them for storage.
- Please charge and maintain the product once every three months when it is not used for a long time.
Electrical Schematic Diagram
Packing list
Name| Host| Cream stick| Egg white stick| charging cable| Cutter head| Cup
body| Manual| Cover
---|---|---|---|---|---|---|---|---
Qty.| 1| 1| 1| 1| 1| 1| 1| 1