Gaabor GCM-M15BK01 Coffee Machine User Manual

: June 13, 2024
: Gaabor

Table of Contents

Gaabor GCM-M15BK01 Coffee Machine
Safety Notice for Using
Product Introduction
Parameters
Operation Method
Cleaning and Maintenance
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

Gaabor GCM-M15BK01 Coffee Machine

please read this manual carefully before using the product and keep it properly for future reference.

Safety Notice for Using

Please observe the following contents to prevent e electric shock, fire, scad, and other accidents.

Please check whether the socket voltage is consistent with the voltage parameter on the nameplate of the coffee machine before use.
This machine is equipped with grounding protection. Please ensure that there must be a grounding socket.
Keep away from children when using.
Do not put the power cord and plug into water or any other liquid to prevent fire and electric shock, Do not damage, bend, or stretch the power cord, and do not place heavy objects on the power cord
Please up the plug when cleaning or not in use, and clean the accessories after the appliance comes down.
Do not use it in high temperatures, high magnetic fields, and humid environments. Do not put this product on a hot surface, near a fire source, or other electrical appliances, such as a refrigerator,
Do not use it when the wire or plug is damaged, the coffee machine fai s or is damaged in any way, and contact the store for maintenance.
Please use original accessories.
This machine is only used for making coffee, please do not use it for other purposes, and place it in a dry environment.
Please place the coffee machine on a flat surface or table. Do not hang the power cord on the edge of the tab e or counter.
Do not contact the power cord with hot surface appliances.
Do not directly touch the hot parts on the surface when the coffee machine is running.
Please clean and maintain the parts of the coffee machine regularly to ensure the quality of the coffee and prolong its service life.
Do not move or turn off the power when the coffee machine is working.
It is prohibited to operate without adding water.
Please read the instructions carefully and master the correct use method to ensure safety.
Do not wash the coffee machine or power cord in water or other liquids.
Do not use it outdoors.
Please boil twice with water before first use to remove the odor.
This product is for domestic use and should not be used for other purposes.
Please keep the instructions for future reference.

Product Introduction

Parameters

Operation Method

Preparation be ore use (first use)

Placing the machine: place the machine on a horizontal and heat-resistant surface, take out the coffee holder, push the brewing cup to be used into the holder, insert it upward into the machine body, and then turn the right hand to lock the holder.
Add water to the water tank: add cold water (purified water) to the maximum capacity sca e of the water tank, or remove the water tank from the machine to add water.
Note : Please keep the water ank vertica when asking you and inserting. Press the water tank gently to ensure tha the valve at the base of the water tank IS combined with the water valve seat on the housing when inserting the tank
Place the cup with a large capacity under the water outlet.
Turn on the power and start the machine: press the switch to start the machine, keep the steam ho water switch at “O’ the power indicator light is on, and the whole machine starts coffee preheating.
The steam/hot water switch indicator lights up after successful preheating: press the coffee switch and keep the button in the ” Recessed ” position, and the pump will start working. Press the SWI ch again or the Raised” position, and the pump will stop working
Washing the machine: Press the coffee switch. Let the water clean the erna pipes of the whole machine through the action of the electromagnetic pump, pour out the water into the cup, repeat several times, and empty the remaining water in he water pan after the operation.
Note : please clean it several times (do not put the coffee powder in the brewing cup) when for first use o no using the machine for a long time.

Daily operation (coffee)

Add cold water (purified water) to the maximum capacity scale of the water tank.
Press the power switch after the machine is powered on, the power indicator will be on, enter the preheating state, turn the right knob to” OFF n, and the whole process will take 60 seconds. When the indicator light is on when the steam/ hot water switch is at 11 OFF •, it indicates that the preheating is completed.
Open the coffee holder and put in the required brewing cup, then close the holder and put the coffee cup under the water outlet. As shown in the figure below:
Press the coffee switch (“Recessed ” position) to start making coffee. When the predetermined amount is reached, press the coffee switch to stop.
The handle can only be opened after the coffee is mode.
Usage of the brewing cup.

Use the method of espresso powder

Daily operation ( milk foam)

Add cold water (purified water) to the maximum capacity scale of the water tank
Add the refrigerated milk (about 150ml) into.
Press the power switch after the machine is powered on, and the power indicator will be on, enter the preheating state, turn the right knob to” OFF”, and press the coffee switch to pump water to the boiler for about 20 seconds. Press the steam/ hot water switch to the “Recessed” position, and the whole process will take 60 seconds. When the indicator light is on, it indicates that the equipment preheating is completed.
Put the cup with milk under the steam pipe and keep the steam pipe immersed under the milk level.
Turn the right knob to the “steam/ hot water 11. The steam flowed out to make milk foam.
Turn the knob to” OFF” after the milk foam is completed, then remove the steam pipe from the milk foam cup and clean the milk on the steam pipe wall.

Daily operation (hot water)

Add cold water (purified water) to the maximum capacity scale of the water tank;
Press the power switch after the machine is powered on, the power indicator light is on, the equipment is preheating at this time, the steam/hot water switch is in the “Raised 11 position, the right knob is rotated to 11OFFU, and the whole process will take 60 seconds. When the 11steam / hot water indicator light is on, it indicates that the equipment preheating is completed.
Put the hot water cup under the steam pipe.
Turn the right knob to the “steam / hot water”. Press the coffee switch and the water pump starts to pump water. After the hot water f1ows out to the required amount, press the coffee switch to turn off the water pump.

Cleaning and Maintenance

Cleaning the water tank:

Grasp both sides of the water tank, lift it up, and take it out;
The water tank shall be cleaned once a week with a mild washing solution, thoroughly washed and wiped dry, and is not suitable for the dishwasher.

Descaling:

The machine can be cleaned regularly according to personal needs.
Put the detergent (about lOg) into the water tank, and then add water to the 1Max11 line.
Start the machine and place a large-capacity cup under the water outlet after the machine is preheated.
Press the coffee switch and the water pump starts to work, so that the clean water containing the detergent flows through the water pipeline of the whole machine, repeat this 5 times.
Replace the water in the water tank, press the coffee switch, and the water pump starts to work to make the water flow through the water pipeline of the whole machine, and repeat this 5 times until the descaling is completed.

Body cleaning:

Cut off the power supply and clean the coffee machine after it is completely cooled.
Wipe the exterior of the coffee machine and some accessories with a wet cloth or a cleaning sponge.
Note : do not use alcohol or solvent cleaner to clean this product, and do not immerse the machine in water.

Faults and Maintenance

Parameters