Gaabor GFT-N420D Table Fan User Manual

June 12, 2024
Gaabor

Gaabor GFT-N420D Table Fan
Fan Operation
Manual
GFT-N420D
= please read this manual carefully before using the product and keep it properly for future reference.

Safety Notice for Using

Please carefully read and follow the ‘Safety Notice for Using” to ensure your safety and prevent property loss.

  1.  Irxorrect installation may cause fire, electric shock or personal injury.
  2. Please do not use this product near the window to prevent fire and electric shock.
  3. Please unplug the power plug from the power supply before cleaning, repair, maintenance and moving.
  4. Please place the fan on a flat and stable surface during operation to avoid overturning.
  5. Fans should not be placed in damp places or places with high humidity (such as bathrooms).

Technical parameters

Model Rated voltage Rated frequency Rated power
OFF N4200 220-240V 50/60Hz 45W

Product parts

Gaabor GFT-N420D Table Fan - Table Fan

1. Front mesh cover 2.Fon blade 3.Mesh cover fixing nut 4.Rear mesh cover
5.Rear guard board 6.Motor shell 7.Swing holder 8.5upport
9.Speed regulating switch I 10.Decorative ring

Installation instructions

Warning: Be sure to cut off the power supply of the fan before installation. Important protective measures and instructions appearing in this manual do not cover all possible situations and conditions. It must be understood that common sense, prudence and caution are factors that must be provided by the person caring for and operating this equipment. The Company will not be responsible for any damage that may occur during transportation or due to improper installation or voltage fluctuation or any port of the product is changed or modified.

Installation

  1. Loosen the mounting nuts of the protective cover on the motor shell.
  2. f ix the rear guard board firmly on the motor shell, and then rotote the guard board mounting nut clockwise to firmly fix it.
  3. Push the fan blade along the motor shaft, and turn it anticlockwise with the mesh cover fixing nut to fasten it.
  4. Flang the front guard on the rear guard with the retainer at the edge of the guard, and then fix it with the decorative ring.

Swing control

  1. Push the swinging holder to make it swing.
  2. Pull the swinging holder to stop.

Packing list

Name| Host| Mesh cover| Mesh ring| Fan blode| Manual
---|---|---|---|---|---
Qty.| 1| 1| 1| 1| 1

Manufacturer:UNITED GAIN LIMITED
Entrusting party: HANGZHOU GLOBAL JET ECOMMERCE CO .,LTD
Address:1-1407, 501 2nd Avenue,QianTang New Area, Hangzhou.P.R.China
Telephone:057 1-88269187
Origin: Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals