anslut 024831 Wireless Charger Instruction Manual

June 13, 2024
anslut

anslut 024831 Wireless Charger

Product Information

  • Product Name: Wireless Charger
  • Model Number: 024831
  • Brand: Jula AB

Product Usage Instructions

Introduction:

The wireless charger is designed to charge compatible devices without the need for cables. – Please read and follow all instructions before using the wireless charger.

Safety

Ensure that the wireless charger is used in accordance with the technical data provided. – Do not use an adapter or cable that you suspect may be damaged or incompatible. – Keep the wireless charger away from water and other liquids. – Do not attempt to disassemble or repair the wireless charger yourself.

Mounting:

Follow the provided instructions for mounting the wireless charger. – Ensure that the wireless charger is securely mounted to a stable surface.

Usage

Connect the wireless charger to a power source using the provided cable. – Place your compatible device on the wireless charger’s charging pad. – The wireless charger will start charging your device automatically. – Ensure that your device is properly aligned with the charging pad for efficient charging.

Indicator Lights

The indicator light on the wireless charger will indicate the charging status of your device. – If the indicator light is not lit, check the cable connection and ensure that your device is properly placed on the charging pad.

Maintenance

Clean the wireless charger regularly using a soft, dry cloth. – Avoid using abrasive cleaners or solvents that may damage the charger.

Disposal

Dispose of the wireless charger in accordance with local regulations for electronic waste disposal.

Technical Data:

  • DC Input Power: 5V/2A, 9V/1.67A, 12V/1.5A
  • Output Power: Max. 15W
  • Cable Length: 1.0m
  • Cable Type: USB C/USB A
  • Diameter: 7.6mm For any further assistance or troubleshooting, please refer to the latest version of the operating instructions available on the Jula website (www.jula.com).
  • Introduction

WHAT IS IN BOX

Introduction

Product description
Wireless charger with charging indicator.

Intended use
The product is use to charge QI- compatible devices. For indoor use only.

Symbols

  • Read the operating instructions carefully and make sure that you understand the instructions before you use the product. Save the instructions for future reference.
  • This product complies with applicable EU directives and regulations.
  • Warning: Risk of electric shock.
  • Recycle as electrical waste.

Product overview

  1. Charger cable type: USB C – USB A
  2. Charger unit

Safety

Safety definitions

  • Warning! If you do not obey these instruc-tions, there is a risk of death or injury.
  • Caution! If you do not obey these instruc-tions, there is a risk of damage to the product, other materials or the adjacent area.
  • Note! Information that is necessary in a given situation.

General safety instruction
Warning! If you do not obey these instruc-tions, there is a risk of death or injury.

  • Read the warning instructions that follow before you use the product.
  • Do not allow children or anyone who is unfamiliar with the product to use it.
  • Do not use the product other than what it is intended for.
  • Do not use the product if the cable is damaged.
  • Do not place the product on wet surface.
  • Do not immerse the product in water or any other liquid.
  • Do not disassemble the product.

Assembly

To assemble the product
Warning! If you do not obey these instructions, there is a risk of injury.

  1. Use QC3.0 adapter, connect the USB cable according to illustration (Figure 1).

anslut-024831-Wireless-Charger-FIG-2

Operation

To do before you operate the product
Warning! Read and understand the safety instructions before operating the product.

  • Make sure to charge the product in a suitable place and that the correct cable is used.
  • Do not connect an unknown adaptor.
  • Make sure that the nominal data for the adaptor corresponds to the technical data for the product.
  • Do not use adaptor or cable that can be suspected to be defective – risk of overheating or fire.
  • Make sure that the product is not damaged before use.

To operate the product
Warning! If you do not obey the safety instruc-tions, there is a risk of death or injury.

  1. Place the product on a suitable place.
  2. NOTE! Make sure that the plugs on the charger cable is fully inserted into the charger socket and into the adaptor.
  3. Plug the adaptor into a grounded socket. The LED light indicator turns ON.
  4. Place the device on the charging zone according to the illustration (Figure 3).
  5. Make sure that the device is charging correctly. Do a check of the LED indicator.
  6. Check your device to see if it is fully charged.
  7. After charging is done, pull out the adaptor from the socket.

Light indicator guide

LED Light

  • Blue light ON – Constant
    Power on

  • Blue round light – Flashing slow
    Charging

  • Blue round light – OFF
    Not charging

  • Blue light – Flashing fast
    Error

Maintenance

  • If the product needs cleaning, unplug it from the socket and wipe it with a dry cloth.
  • Make sure that the cable is not damaged.

Storage

Store the product in a dry place, away from children.

Disposal

To discard the product
Make sure that you follow local regulations when you discard the product. Do not burn the product.

Technical data

Technical data

DC Input| 5V/2 A
 | 9V/ 1.67 A
 | 12V/1.5 A
Output power| max. 15 W
Cable length| 1.0 m
Cable type| USB C/ USB A
Diameter| Ø 100 mm
Height| 7.6 mm

Troubleshooting

Error Cause Action





The product do not charge.

| Device is not placed correctly on the product. (Figure 2)| ****

See illustration. (Figure 3)

Cable is not correctly inserted.| Check the cable, insert properly.
Damaged cable or adaptor.| Replace cable or adaptor.
Casing of the device is too thick.| Place device on the product without the casing.
Device is not QI compatible.| Check if the device is QI compatible.


LED light is flashing fast

| Foreign metal object is placed on the charger.| Remove any object placed on the charger.
Product is defective.| Discard the product.

EU DECLARATION OF CONFORMITY

Jula Item number: 024831
Model no.: WC-097

Jula AB, Box 363, SE-532 24 SKARA, SWEDEN
This declaration of conformity is issued under the sole responsibility of the manufacturer.

WIRELESS CHARGER

Conforms to the following directives, regulations and standards

Directive/Regulatio n Harmonised standar d
RED 2014/53/EU ETSI EN 301 489-1 V2.2.3, Draft ETSI EN 301 489-3 V2.3.0, EN

55032:2015+A11, EN 55035:2017+A11, ETSI EN 303 417 V1.1.1, EN IEC 62311:2020, EN IEC 62368-

1:2020+A11

RoHS 2011/65/EU + 2015/863| EN 50581:2012

This product was CE marked in year:

Signed for and on behalf of

Skara 2022-11-25

FREDRIK BOHMAN
BUSINESS AREA MANAGER

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals