ASROCK IMB-X1316 Motherboard Instruction Manual
- June 13, 2024
- ASRock
Table of Contents
Jumpers and Headers Setting Guide
IMB-X1316
IMB-X1316 Motherboard
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Revision History
| Date | Description |
|---|---|
| 28-Jun-23 | First Release |
| 12-Sep-23 | Second Release |
COM Port Pin9 PWR Setting Jumpers (Items 1, 13, 35)
1 : PWR_COM1 (For COM Port1)
13 : PWR_COM5 (For COM Port5)
PWR_COM6 (For COM Port6)
35 : PWR_COM2 (For COM Port2)
PWR_COM3 (For COM Port3)
PWR_COM4 (For COM Port4)
1-2 : +5V
2-3 : +12V
LAN LED Headers (Items 2, 47)
2 : LAN1_LED1 (For LAN1 Port)
47 : LAN2_LED1 (For LAN2 Port)
| Pin | Signal Name |
|---|---|
| 1 | LILEDP |
| 2 | LED_LNK#_ACT |
| 3 | LED_1000# |
| 4 | LED_2500# |
Chassis FAN Connectors (+12V)
(Items 3, 5, 33)
3 : CHA_FAN1
5 : CHA_FAN3
33 : CHA_FAN2
8-Pin ATX 12V Power Connector (ATX12V1)
| Pin | Signal Name |
|---|---|
| 1 | GND |
| 2 | +12V |
| 3 | CHA_FAN_SPEED |
| 4 | FAN_SPEED_CONTROL |
CPU FAN Connector (+12V) (CPU_FAN1)
| Pin | Signal Name | Signal Name | Pin |
|---|---|---|---|
| 1 | GND | ATX12V | 5 |
| 2 | GND | ATX12V | 6 |
| 3 | GND | ATX12V | 7 |
| 4 | GND | ATX12V | 8 |
Power Loss Header (PWR_LOSS1)
Short : Power Loss
Open : No Power Loss
PSU_SMB1
| Pin | Signal Name |
|---|---|
| 1 | SMB_CLK |
| 2 | SMB_DATA |
| 3 | SMBALERT# |
| 4 | GND |
| 5 | +3V |
24-pin ATX Power Input Connector (ATXPWR1)
| Pin | Signal Name | Signal Name | Pin |
|---|---|---|---|
| 1 | +3V | +3V | 13 |
| 2 | +3V | -12V | 14 |
| 3 | GND | GND | 15 |
| 4 | +5V | PSON# | 16 |
| 5 | GND | GND | 17 |
| 6 | +5V | GND | 18 |
| 7 | GND | GND | 19 |
| 8 | PWROK_PS | NA | 20 |
| 9 | ATX+5VSB | +5V | 21 |
| 10 | +12V | +5V | 22 |
| 11 | +12V | +5V | 23 |
| 12 | +3V | GND | 24 |
System Panel Header (PANEL1)
| P | Signal Name | Signal Name | Pin |
|---|---|---|---|
| 1 | HDLED+ | PLED+ | 2 |
| 3 | HDLED- | PLED- | 4 |
| 5 | GND | PWRBTN# | 6 |
| 7 | RESET# | GND | 8 |
| 9 | GND | 10 |
COM Port Headers
COM5, COM6 (RS232)
COM2 (RS232/422/485)*
COM3, COM4 (RS232)
| Pin | Signal Name | Signal Name | Pin |
|---|---|---|---|
| 1 | DDCD# | RRXD | 2 |
| 3 | TTXD | DDTR# | 4 |
| 5 | GND | DDSR# | 6 |
| 7 | RRTS# | CCTS# | 8 |
| 9 | PWR | 10 |
- This motherboard supports RS232/422/485 on COM1, 2 ports. Please refer to the table below for the pin definition. In addition, COM1, 2 ports (RS232/422/485) can be adjusted in BIOS setup utility > Advanced Screen > Super IO Configuration.
You may refer to our user manual for details.
COM1, 2 Ports Pin Definition
| Pin | RS232 | RS422 | RS485 |
|---|---|---|---|
| 1 | DCD | TX- | RTX- |
| 2 | RXD | TX+ | RTX+ |
| 3 | TXD | RX+ | N/A |
| 4 | DTR | RX- | N/A |
| 5 | GND | GND | GND |
| 6 | DSR | N/A | N/A |
| 7 | RTS | N/A | N/A |
| 8 | CTS | N/A | N/A |
| 9 | PWR | PWR | PWR |
USB 3.2 Gen2 Connectors (Type A)
USB3_10
USB3_5
| Pin | Signal Name |
|---|---|
| 1 | USB_PWR |
| 2 | USB_D- |
| 3 | USB_D+ |
| 4 | GND |
| 5 | SSRX- |
| 6 | SSRX+ |
| 7 | GND |
| 8 | SSTX- |
| 9 | SSTX+ |
M.2 Key-E Socket (M2_E1)
| Pin | Signal Name | Signal Name | Pin |
|---|---|---|---|
| 1 | GND | +3VSB | 2 |
| 3 | USB_D+ | +3VSB | 4 |
| 5 | USB_D- | NA | 6 |
| 7 | GND | NA | 8 |
| 9 | CNV_WGR_D1- | CNV_RF_RESET | 10 |
| 11 | CNV_WGR_D1+ | NA | 12 |
| 13 | GND | MODEM_CLKREQ | 14 |
| 15 | CNV_WGR_D0- | NA | 16 |
| 17 | CNV_WGR_D0+ | GND | 18 |
| 19 | GND | NA | 20 |
| 21 | CNV_WGR_CLK- | CNV_BRI_RSP | 22 |
| 23 | CNV_WGR_CLK+ | ||
| 33 | GND | CNV_BGI_DT | 32 |
| 35 | PETp | CNV_RGI_RSP | 34 |
| 37 | PETn | CNV_BRI_DT | 36 |
| 39 | GND | NA | 38 |
| 41 | PERp | NA | 40 |
| 43 | PERn | NA | 42 |
| 45 | GND | NA | 44 |
| 47 | PEFCLKp | NA | 46 |
| 49 | PEFCLKn | NA | 48 |
| 51 | GND | SUSCLK | 50 |
| 53 | CLKREQ# | PERST0# | 52 |
| 55 | WAKE# | W_DISABLE1# | 54 |
| 57 | GND | W_DISABLE2# | 56 |
| 59 | CNV_WT_D1- | SMB_DATA | 58 |
| 61 | CNV_WT_D1+ | SMB_CLK | 60 |
| 63 | GND | NA | 62 |
| 65 | CNV_WT_D0- | CLKIN_XTAL_LCP | 64 |
| 67 | CNV_WT_D0+ | NA | 66 |
| 69 | GND | NA | 68 |
| 71 | CNV_WT_CLK- | NA | 70 |
| 73 | CNV_WT_CLK+ | +3VSB | 72 |
| 75 | GND | +3VSB | 74 |
M.2 Key-M Socket (M2_M1)
| Pin | Signal Name | Signal Name | Pin |
|---|---|---|---|
| 1 | GND | +3.3V | 2 |
| 3 | GND | +3.3V | 4 |
| 5 | PERn3 | NA | 6 |
| 7 | PERp3 | NA | 8 |
| 9 | GND | LED | 10 |
| 11 | PETn3 | +3.3V | 12 |
| 13 | PETp3 | +3.3V | 14 |
| 15 | GND | +3.3V | 16 |
| 17 | PERn2 | +3.3V | 18 |
| 19 | PERp2 | NA | 20 |
| 21 | GND | NA | 22 |
| 23 | PETn2 | NA | 24 |
| 25 | PETp2 | NA | 26 |
| 27 | GND | NA | 28 |
| 29 | PERn1 | NA | 30 |
| 31 | PERp1 | NA | 32 |
| 33 | GND | NA | 34 |
| 35 | PETn1 | NA | 36 |
| 37 | PETp1 | DEVSLP | 38 |
| 39 | GND | SMB_CLK | 40 |
| 41 | PERn0 | SMB_DATA | 42 |
| 43 | PERp0 | NA | 44 |
| 45 | GND | NA | 46 |
| 47 | PETn0 | NA | 48 |
| 49 | PETP0 | PERST# | 50 |
| 51 | GND | CLKREQ# | 52 |
| 53 | PEFCLKn | WAKE# | 54 |
| 55 | PEFCLKp | NA | 56 |
| 57 | GND | NA | 58 |
| 67 | NA | NA | 68 |
| 69 | PEDET | +3.3V | 70 |
| 71 | GND | +3.3V | 72 |
| 73 | GND | +3.3V | 74 |
| 75 | GND |
M.2 Key-M Socket (M2_M2)
| Pin | Signal Name | Signal Name | Pin |
|---|---|---|---|
| 1 | GND | +3.3V | 2 |
| 3 | GND | +3.3V | 4 |
| 5 | PERn3 | NA | 6 |
| 7 | PERp3 | NA | 8 |
| 9 | GND | LED | 10 |
| 11 | PETn3 | +3.3V | 12 |
| 13 | PETp3 | +3.3V | 14 |
| 15 | GND | +3.3V | 16 |
| 17 | PERn2 | +3.3V | 18 |
| 19 | PERp2 | NA | 20 |
| 21 | GND | NA | 22 |
| 23 | PETn2 | NA | 24 |
| 25 | PETp2 | NA | 26 |
| 27 | GND | NA | 28 |
| 29 | PERn1 | NA | 30 |
| 31 | PERp1 | NA | 32 |
| 33 | GND | NA | 34 |
| 35 | PETn1 | NA | 36 |
| 37 | PETp1 | DEVSLP | 38 |
| 39 | GND | SMB_CLK | 40 |
| 41 | PERn0 | SMB_DATA | 42 |
| 43 | PERp0 | NA | 44 |
| 45 | GND | NA | 46 |
| 47 | PETn0 | NA | 48 |
| 49 | PETP0 | PERST# | 50 |
| 51 | GND | CLKREQ# | 52 |
| 53 | PEFCLKn | WAKE# | 54 |
| 55 | PEFCLKp | NA | 56 |
| 57 | GND | NA | 58 |
| 67 | NA | NA | 68 |
| 69 | PEDET | +3.3V | 70 |
| 71 | GND | +3.3V | 72 |
| 73 | GND | +3.3V | 74 |
| 75 | GND |
M.2 Key-B Socket (M2_B1)
| Pin | Signal Name | Signal Name | Pin |
|---|---|---|---|
| 1 | NA | +3.3V | 2 |
| 3 | GND | +3.3V | 4 |
| 5 | GND | FuLL_Card_Power_off | 6 |
| 7 | USB_D+ | W_DISABLE | 8 |
| 9 | USB_D- | WWAN_LED# | 10 |
| 11 | GND | ||
| NA | 20 | ||
| 21 | GND | NA | 22 |
| 23 | NA | NA | 24 |
| 25 | NA | NA | 26 |
| 27 | GND | NA | 28 |
| 29 | USB3_RX- | UIM_RESET | 30 |
| 31 | USB3_RX+ | UIM_CLK | 32 |
| 33 | GND | UIM_DATA | 34 |
| 35 | USB3_TX- | UIM_PWR | 36 |
| 37 | USB3_TX+ | NA | 38 |
| 39 | GND | NA | 40 |
| 41 | PERn0 | NA | 42 |
| 43 | PERp0 | NA | 44 |
| 45 | GND | NA | 46 |
| 47 | PETn0 | NA | 48 |
| 49 | PETP0 | PERST# | 50 |
| 51 | GND | CLKREQ# | 52 |
| 53 | PEFCLKn | WAKE# | 54 |
| 55 | PEFCLKp | NA | 56 |
| 57 | GND | NA | 58 |
| 59 | NA | NA | 60 |
| 61 | NA | NA | 62 |
| 63 | NA | NA | 64 |
| 65 | NA | NA | 66 |
| 67 | NA | NA | 68 |
| 69 | NA | +3.3V | 70 |
| 71 | GND | +3.3V | 72 |
| 73 | GND | +3.3V | 74 |
| 75 | NA |
LVDS Panel Connector (LVDS1)
| Pin | Signal Name | Signal Name | Pin |
|---|---|---|---|
| 1 | LCD_VCC | LCD_VCC | 2 |
| 3 | +3.3V | N/A | 4 |
| 5 | N/A | LVDS_A_DATA0# | 6 |
| 7 | LVDS_A_DATA0 | PD (Panel Detection) | 8 |
| 9 | LVDS_A_DATA1# | LVDS_A_DATA1 | 10 |
| 11 | GND | LVDS_A_DATA2# | 12 |
| 13 | LVDS_A_DATA2 | GND | 14 |
| 15 | LVDS_A_DATA3# | LVDS_A_DATA3 | 16 |
| 17 | GND | LVDS_A_CLK# | 18 |
| 19 | LVDS_A_CLK | GND | 20 |
| 21 | LVDS_B_DATA0# | LVDS_B_DATA0 | 22 |
| 23 | GND | LVDS_B_DATA1# | 24 |
| 25 | LVDS_B_DATA1 | GND | 26 |
| 27 | LVDS_B_DATA2# | LVDS_B_DATA2 | 28 |
| 29 | DPLVDD_EN | LVDS_B_DATA3# | 30 |
| 31 | LVDS_B_DATA3 | GND | 32 |
| 33 | LVDS_B_CLK# | LVDS_B_CLK | 34 |
| 35 | GND | CON_LBKLT_EN | 36 |
| 37 | CON_LBKLT_CTL | LCD_BLT_VCC | 38 |
| 39 | LCD_BLT_VCC | LCD_BLT_VCC | 40 |
- PD (Panel Detection): Connect this pin to LVDS Panel’s Ground pin to detect Panel detection.
Panel Power Select
(PNL_PWR1)
1-2 : +3V
2-3 : +5V
4-5 : +12V
Installation of ROM Socket
-
Do not apply force to the actuator cover after ic inserted.
-
Do not apply force to actuator cover when it is opening over 120 degree, Otherwise, the actuator cover may be broken.
-
The yellow dot (Pin1) on the ROM must be installed at pin1 position of the socket (white arrow area).
-
Make sure the white dot on the ROM is installed outwards of the socket.
-
For further details of how to install ROM, please refer to ASRI website.
Warning: If the installation does not follow as the picture, then it may cause severe damage to chipset & MB.
Audio Jacks
Blue – Line In
Green – Line Out
Pink – Mic In
Top : USB 3.2 Gen2 Port (USB3_2)
Bottom : USB 3.2 Gen2 Port (USB3_1)
Top : RJ45 LAN Port (LAN2)
Middle : USB 3.2 Gen2 Port (USB3_9)
Bottom : USB 3.2 Gen2 x2 20G Type C Port
(TC_U3_7_8)
Top : USB 2.0 Port (USB2_10)
Middle : USB 2.0 Port (USB2_11)
Bottom : HDMI Port (HDMI2)
Top : COM Port (COM1) (RS232/422/485)*
Bottom Left : HDMI Port (HDMI1)
Bottom Right : DisplayPort (DP1)
Top : RJ45 LAN Port (LAN1)
Middle : USB 3.2 Gen2 Port (USB3_4)
Bottom : USB 3.2 Gen2 Port (USB3_5)