Schreder PIANO GEN2 Mini LED Exterior Lighting Installation Guide
- June 13, 2024
- Schreder
Table of Contents
PIANO GEN2
Mini & Midi
INSTALLATION INSTRUCTIONS
Dimensions
Mechanical installation
Electrical installation
Knuckle joint angle
SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS – The light source contained in this luminaire shall only
be replaced by the manufacturer or his service agent or a similar qualified
person. Always switch off the power prior to installation, maintenance or
repair activities.
RISK GROUP 2
RISK GROUP 2 – CAUTION! Hazardous optical radiation may be emitted from
this product. Do not stare at the luminaire when operating as it may be
harmful to the eyes. The luminaire should be positioned so that prolonged
staring at the luminaire at a distance of less than 0.94m is not expected.
ENERGY EFFICIENCY
This product contains a light source of an energy efficiency class G or
higher or see table on first page.
PVC INSULATION AND Y CONNECTION
In case of PVC insulated mains cable, the installer MUST ensure that the
WHOLE cable is protected against climatic conditions, especially UV rays and
rain, by making sure that the cable is contained inside the luminaire and
pole. Y- connection: In case of damage to the wire, it has to be replaced only
by the manufacturer, distributor or by an expert, to avoid risks.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>