DELTA DSP-S-5CB-550L Steam Control and Head Instructions
- June 13, 2024
- Delta
Table of Contents
DSP-S-5CB-550L Steam Control and Head
STEAM CONTROL AND HEAD
■ Unilateral
STEAM CONTROL FEATURES:
• Finger-light touchscreen operation
• 12 user presets programmable for duration,
temperature and optional audio option
• Temperature range 50˚F min to 125˚F max
• Steam timer up to 60 minutes
• Built-in WiFi and Bluetooth capabilities
• Operates Audio option
• Patented Dual Sensor Technology: The control
features dual temperature sensors that deliver
extremely accurate temperature precision to
smoothly regulate the steam shower environment
STEAM CONTROL STANDARD SPECIFICATIONS:
• Surface Mount – 2 3/4″ hole required
• Must mount inside the steam room
• It is recommended that the multi-conductor cable
be run through 3/4″ conduit to protect cable from
damage and to facilitate easy replacement
• Mount control near seating area and not above
Steam head
• Control should be mounted 48″ above the floor
• Required Electrical Service: Low-voltage connection
from the 5GE-SMP steam generator via multi-conductor
cable (supplied with generator)
• IMPORTANT: Interface may be installed in a Portrait
or Landscape orientation. Plece note the “TOP” of
control prior to mounting.
STEAMHEAD STANDARD SPECIFICATIONS:
• Includes 3/4″ NPT female thread for connection to steam line
• Steam line should protrude 1/4″ to 1/2″ from finished surface
• Steam head should be mounted 12″ – 18″ above the
finished floor or 6″ above the rim of the tub. The
mounting location must also not be directly beneath
the control and should be as far from the seating area
as possible.
• Includes silicone cover
• Essential oil reserve on top of steam head
WARRANTY
• See separate warranty document
COMPLIES WITH:
• This device complies with part 15 of the FCC Rules. This device contains
license-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada’s license-exempt RSS(s) and operation
is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an output on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Pursuant to FCC 15.21 of the FCC rules, changes not expressly approved by
Delta Faucet Co. might cause harmful interference and void the FCC
authorization to
operate this product.
Designate Proper Finish Suffix
Delta reserves the right (1) to make changes in specifications and materials,
and (2) to change or discontinue
models, both without notice or obligation. Dimensions are for reference only.
See current full-line price book or
www.deltafaucet.com for finish options and
product availability.
DSP-S-5CB-550L Rev. A
Delta Faucet Company
55 E. 111th Street, Indianapolis, IN 46280
350 South Edgeware Road, St. Thomas, ON N5P 4L1
© 2023 Delta Faucet Company
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>