GE 23071LO Color Choice 7 ft Winterberry Pre Lit Artificial Tree User Manual
- June 13, 2024
- GE
Table of Contents
GE 23071LO Color Choice 7 ft Winterberry Pre Lit Artificial Tree
Precautions
CAUTION: EXERCISE CARE WHEN UNPACKING AND ASSEMBLING
- Nicolas Holiday Ltd. thanks you for purchasing this pre-lit Christmas tree.
- Should you have any problems with your tree, visit us at www.geholidaylighting.com for more information.
- You can call our toll free number at 1-877-398-7337.
- Check our website for the latest service hours and assembly instruction videos.
WARNING: Risk of fire and electric shock. Disconnect light set from power before starting.
- Keep wires dear of being pinched or cut during assembly or installation.
- Do not press or grasp bulbs during assembly or installation.
- Before starting make sure stakes are clear of underground: sprinkler, telephone and power lines.
- Please read all instructions and warnings included with this product before using.
Assembly Instructions
- Carefully unpack, removing any bubble wrap and inspect the contents of your tree. {Fig. A}
- The tree stand should be open and set at 90° angle. Remember to tighten the thumbscrew after connecting bottom section and tree stand. See {Fig. B} Untie the red twist-tie to release branch panels. Gently position any branches that do not fall into place. Your assembled tree may be heavy and difficult to move when done, so place the stand in the desired location before assembling. Secure in place using the (4) metal stakes.
- When you connect two tree sections, it is important that you align the mark on the tree poles. See {Fig. C}
- To electrically connect the tree sections: First, locate the 2 white connector cord tags between each section. Then fully insert the 2-pin polarized male and female connectors. Fully screw on the cap to secure connection.
- To illuminate, find and unhank the long lead wire from the bottom section. Fully insert the direct plug-in adapter into a working GFCI outlet or an outdoor-rated extension cord.
- Assemble section by section.
Disconnect the decorative item from the power source before performing any maintenance or cleaning.
Indoor/ Outdoor 120v
- THIS IS NOT A TOY, FOR DECORATIVE USE ONLY.
GE is a trademark of General Electric Company and is under license by Nicolas Holiday Ltd.
Troubleshooting Tips
If one section of your tree does not illuminate, check that section for cut or damage wires or that all electrical connections on tree are made. Due to unique construction of the light sets, the individual LEDs are not replaceable. The light sets are designed for continued operation even if an individual LED fails to light.
IMPORTANT: Store your carton neatly in a cool, dry location protected from sunlight to prolong the tree life and to better keep the light sets in working order. Do not place a heavy load on the carton to avoid damage to or crushing the carton and tree inside.
NOTE: Hammer/Mallet may be required for stakes
NO Spare Bulbs
Nicolas Holiday Ltd
©2023 Nicolas Holiday Ltd.
Suite 2706 Skyline Tower, 39 Wang Kwong Road,
Kowloon Bay, Kowloon, Hong Kong
All rights reserved. Printed in China NHL Model No. 23071 LO
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>