RIGID 11-13521-B 360-Series PRO SAE Fog Kit Instructions

June 13, 2024
RIGID

RIGID 11-13521-B 360-Series PRO SAE Fog Kit

Product Information

The 360 Series is a product line from Rigid Industries. The package includes:

  • (2) Rigid 360 Lights (available in 4 or 6 inch sizes)
  • Mounting hardware

Rigid Industries is a reputable company that provides high-quality products for vehicles.

Installation Instructions

Before proceeding with the installation, please read and follow these instructions carefully. While the installation process is designed to be simple, we recommend professional installation for the best results.

  1. Always disconnect any power sources connected to your vehicle before servicing fuses or electrical systems.
  2. Wiring Leads:
    • Red Wire: Projecting Trigger
    • Black Wire: Ground
    • White Wire: Back-Lighting Trigger

4 360-Series Assembly Diagram

Follow the steps below:

  1. Place an M8x25mm Carriage Bolt through the bracket (A).
  2. Place an M8 Flat Washer (B) on the carriage bolt.
  3. Place an M8 Lock Washer (C) on the carriage bolt.
  4. Tighten the light to the bracket using an M8 Nut (D).
  5. Place an M6 Ny Lock Nut (E) in the Heatsink.
  6. Slide the Mounting Bushing (F) into the Heatsink.
  7. Tighten the Mount Bushing to the Heatsink using a 6-32x.375 Socket Head (G).
  8. Place an M6 Flat Washer (H) on item I before installation.
  9. Tighten the bracket to the light using an M6x22mm Socket Head (I) with a torque of 32in-lbs.

6 360-Series Assembly Diagram

Follow the steps below:

  1. Place an M8x25mm Carriage Bolt (A) through the bracket.
  2. Place an M8 Flat Washer (B) on the carriage bolt.
  3. Place an M8 Lock Washer (C) on the carriage bolt.
  4. Tighten the light to the bracket using an M8 Nut (D).
  5. Place an M6 Ny Lock Nut (E) in the Heatsink.
  6. Place an M4 Ny Lock Nut (F) into the mounting bushing.
  7. Slide the Mounting Bushing (G) into the Heatsink.
  8. Place an M6 Flat Washer (H) on J prior to installation.
  9. Place an M4 Flat Washer (K) on K prior to installation.
  10. Tighten the bracket to the light using an M6x22mm Socket Head (J) with a torque of 32in-lbs.
  11. Tighten the bracket to the light using an M4x22mm Socket Head (K) with a torque of 9in-lbs.

Wiring: Wire your lights according to the instructions included with the light. Be careful to avoid any heat sources and sharp or abrasive surfaces.

Your installation is now complete. Welcome to the Rigid Nation!

Warranty Information

Rigid, 360-Series, and Rigid Industries are registered and/or common law marks owned by JST Performance, LLC, a Delaware limited liability company doing business as Rigid Industries.
11-13521-B

PRODUCTS INCLUDE

  • (2) RIGID 360 Lights (4 or 6 inch)
  • Mounting hardware

IMPORTANT
THANK YOU FOR PURCHASING RIGID INDUSTRIES’ PRODUCTS FOR YOUR VEHICLE.
Please read through all of these Instructions and tips before proceeding with the installation.
We do our best to provide a simple installation process for all applications however a professional installation is always recommended.
Always disconnect any power sources connected to your vehicle before servicing fuses or electrical systems.

WIRING LEADS

  • RED WIRE = PROJECTING TRIGGER
  • BLACK WIRE = GROUND
  • WHITE WIRE = BACK-LIGHTING TRIGGER

INSTALLATION INSTRUCTIONS

4” 360-SERIES ASSEMBLY DIAGRAM

A M8x25mm Carriage Bolt Place through bracket
B M8 Flat Washer Place on carriage bolt
C M8 Lock Washer Place on carriage bolt
D M8 Nut Tighten light to bracket
E M6 Ny Lock Nut Place in Heatsink
F Mounting Bushing Slide into Heatsink
G 6-32x.375” Socket Head Tighten mount bushing to Heatsink
H M6 Flat Washer Place on item I prior to install
I M6x22mm Socket Head Tighten the bracket to the light (Torque 32in-lbs)

6” 360-SERIES ASSEMBLY DIAGRAM

RIGID-11-13521-B-360-Series-PRO-SAE-Fog-Kit-3

A M8x25mm Carriage Bolt Place through bracket
B M8 Flat Washer Place on carriage bolt
C M8 Lock Washer Place on carriage bolt
D M8 Nut Tighten light to bracket
E M6 Ny Lock Nut Place in Heatsink
F M4 Ny Lock Nut Place into mounting bushing
G Mounting Bushing Slide into Heatsink
H M6 Flat Washer Place on J prior to install
I M4 Flat Washer Place on K prior to install
J M6x22mm Socket Head Tighten bracket to the light

(Torque 32in-lbs)

K| M4x22m Socket Head| Tighten the bracket to the light

(Torque 9in-lbs)

Wiring: Wire your lights according to the instructions included with the light. Take care to avoid any heat sources and sharp or abrasive surfaces.
Your installation is now complete.
Welcome to the Rigid Nation!

WARRANTY INFORMATION

For warranty information, visit www.rigidindustries.com/about/warranty 779 N Colorado St, Gilbert, AZ 85233 • 855-760-5337 www.rigidindustries.com
RIGID, 360-Series and Rigid Industries are registered and/or common law marks owned by JST Performance, LLC, a Delaware limited liability company d/b/a Rigid Industries.
11-13521-B

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals