inim PREVIDIA-C-REP Repeater Panel With 4.3 Graphic Touch… Instruction Manual

June 13, 2024
INIM

inim PREVIDIA-C-REP Repeater Panel With 4.3 Graphic Touch… Instruction Manual
Repeater Panel With 4.3 Graphic Touch

Technical specifications

Power supply voltage| PREVIDIA-C-REP
19 / 30 V
---|---
Stand-by current draw| 110 mA
Current draw during mains failure| 80 mA
Maximum current draw| 130 mA
Operating temperature| -5°C / 40°C
Dimensions| 210 x 132 x 32mm
Weight| 330g


EN IEC 62368-1

Isolation class l
Terminal type +24/A+/A-/-, +24/B+/B-/- ES1, PS2
Ethernet ES1, PS1
USB ES1, PS1

Mounting
Mounting
Hornet+ network connection

Connection Instruction
Wiring the repeater using an external power supply
Connection Instruction

EN54:
The power supply device must comply with EN54-4 normatives
Download
QR Code

Directive 2014/53/EU
Hereby, INIM Electronics S.r.l. declares that these Previdia Compact control panels are in Directive 2014/53/EU Hereby, INIM Electronics S.r.l. declares that these Previdia Compact control panels are in

Documents for the users Declarations of Performance, Declarations of Conformity and Certificates
concerning to INIM Electronics S.r.l. products may be downloaded free of charge from the web address www.inim.biz, getting access to Extended Access and then selecting “Certifications” or requested to the e-mail address info@inim.biz or requested by ordinary mail to the address shown in this manual.

Manuals may be downloaded free of charge from the web address www.inim.biz, getting access to Extended Access and then selecting “Manuals”

WEEE Informative notice regarding the disposal of electrical and electronic equipment (applicable in countries
with differentiated waste collection systems)

The crossed-out bin symbol on the equipment or on its packaging indicates that the product must be disposed of
correctly at the end of its working life and should never be disposed of together with general household waste. The user, therefore, must take the equipment that has reached the end of its working life to the appropriate civic
amenities site designated to the differentiated collection of electrical and electronic waste. As an alternative to the autonomous-management of electrical and electronic waste, you can hand over the equipment you wish to dispose of to a dealer when purchasing new equipment of the same type. You are also entitled to convey for disposal small electronic-waste products with dimensions of less than 25cm to the premises of electronic retail outlets with sales areas of at least 400m2, free of charge and without any obligation to buy

Appropriate differentiated waste collection for the subsequent recycling of the discarded equipment, its treatment and its environmentally compatible disposal helps to avoid possible negative effects on the environment and on health and favours the reuse and/or recycling of the materials it is made of.

Copyright The information contained in this document is the sole property of INIM Electronics s.r.l. No part may be copied without written authorization from INIM Electronics s.r.l. All rights reserved.

Inim Electronics S.1

Centobuchi, via Dei Lavoratori 10
63076 Monteprandone (AP) Italy
Tel. +39 0735 705007M
Fax +39 0735 70491
info@inim.biz _ www.inim.biz

PREVIDIA Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals