inim ESB 1011 Addressable Sounder Base Low Power Range Instruction Manual
- June 3, 2024
- INIM
Table of Contents
inim ESB 1011 Addressable Sounder Base Low Power Range
Product Description
The ESB1011 sounder connects to the loop and acquires its own address during the configuration phase The sounder is powered by the loop. The device is equipped with a short-circuit isolator capable of sectioning the loop in the event of a short circuit The tone played in the event of activation and the relative sound power must be selected by means of the inner DIP switches or at the control panel during the programming phase, in such a way as lo obtain different signals for different situations. For the list of tones, refer to the labels in the appendix.
Technical specifications
Description of the parts
Terminal board
LED signais
DIP switches
Following default DIP switches positions:
By this setting, he sounder uses control panel programming.
CE mark
CE
0051
INIM Eled ronl css.r.l.
Via Del Lavoretor110 – Fraz. Centobud,I
63076 Monteprandone (AP)- Italy
20
0051-CPR-2036
EN 54-3:2001 + A1:2002 + A2:2006 EN 54-17:2005
ESB1011
Addressable sounder base forflre detection and fire
alann systemsInstalled In buildings
EsscrnUol d 1nr.u ,a1lS1lcs| Perfonnanoo
;o,, or.ul ooal roll oblQly| PASS
Ta! arat1m to| ppl y w:irtogo| | PAS,S
OurnbIII,, or
Jtfo’gHg.;’ll
| Tc mp(liillL1fD rm .ft,tonn,| PASS
Vlbmtlcm rn r.lmanm| PASS
HLJmldlly rn =t.cnm| PASS
CCnv cm n,| nn.CD| PASS
EloCl!fcel Slllblll l y| PASS
i go h j| PASS
E580flllo l dJor’D.d fJ r’is:IICJ| Pobrum
C,3.2 Synd \mntm il on| PASS
E”=oritlnl dunndo r’fstk| Pobnam
4 ·, 3. 7 9 yni:lm 1,,1zauon| PASS
Wamings and limitatlons
- This device complíes with “syn canonization requirements according to EN54-3 standards by means of periodic Commands sent from the control panel over the loop
- The certified tones and sequences are highlighted in the “EN54-3 approved column of the table in the appendix Tones
WEEE
Informative notice regarding tho disposal of electrical and electronic
equipment (applicable in countries with differentiated waste collection
systems)
The crossed-out bin symbol on the equpmentoron’s packaging indicates that the
product must be disposed of correctly at the end of working time and should
ever be disposed of together with general house hok waste. The user,
therefore. must take the equipment that has reached the end of is working life
to the appropriate visa amenities site designated to the differentiated
Cohocton of electrical and electronic waste. As en alematke to the auto no
management of electrical land electronic waste. you can hand over the
equipment you want to depose of a deakrhen purchasing now equipment of the
same typo You are also entitled to convey for dteposalis malelec Tronic waste
products with dimensions of than 2 5cm ta the premises of action icrelaloute
to with sakes area of at least 400m2, free of charge and without anyobigaton
lo buy. Appropriate differentiated waste collection for the subsequent
recycling of discarded equipment is treatment and environmentally complete
disposal help sio avoid possible negative effects on the environment and
health and favors the re-use and/or recycling of the materials made of.
Tones
N’
I)
|
Name
Silence
| Sound !ovcl
(dB@ 1m)
| Absorptlon, low volum e (mA)
tone
0
| Ab sorption , high volume
(mA)
tone
0
---|---|---|---|---
min
0
| max
0
1| ISO 8201 2800Hz| 87.4| 95.9| 5| 5
‘2| ISO 8201 1000Hz| 87.4| 95.9| 2.6| 2.9
3| 1KHz/llOOHz 2Hz| 77| 87| 2.2| 2]
4| NEN 2575:2000
(Dutch slow whoop)
| 88.5| 94.4|
2.5
|
3 .
5| SIN 1UUUHZ| 87.9| 95.9| 1.-:-r| 2.00
6| SIN 2800Hz| 88| 98| 5| 5
7| Fast whoop
(AS1670)
| 87.2| 93.4| 2.5|
2,7
8 1000Hz 1sON/1s0 Ff| 77| 87| 14| 2
1l| 800Hz 0.2/1s| 77| 87| 1.7| 22
10| 800-1KHz 1Hz| 87.3| 94.2| 2.5| 2.7
tt l AFNOR NFS 32 001| 76| 85| 1.4| 1| .7
12| AS 1670 Alert| 79.9| 88.6| 1.5| 1| .G
13 AS1670 Evacuation| 87.1| 93.2| 2.5| 3
14| DIN 33·41)1| 88 .0| 93.5| 2.S| 3
N’
I)
|
Name
Silence
| Sound !ovcl
(dB@ 1m)
| Absorption, low volum e (mA)
tone
0
| Ab sorption, high volume
(mA)
tone
0
---|---|---|---|---
min
0
| max
0
1| ISO 8201 2800Hz| 87.4| 95.9| 5| 5
‘2| ISO 8201 1000Hz| 87.4| 95.9| 2.6| 2.9
3| 1KHz/llOOHz 2Hz| 77| 87| 2.2| 2]
4| NEN 2575:2000
(Dutch slow whoop)
| 88.5| 94.4|
2.5
|
3 .
5| SIN 1UUUHZ| 87.9| 95.9| 1.-:-r| 2.00
6| SIN 2800Hz| 88| 98| 5| 5
7| Fast whoop
(AS1670)
| 87.2| 93.4| 2.5|
2,7
8 1000Hz 1sON/1s0 Ff| 77| 87| 14| 2
1l| 800Hz 0.2/1s| 77| 87| 1.7| 22
10| 800-1KHz 1Hz| 87.3| 94.2| 2.5| 2.7
tt l AFNOR NFS 32 001| 76| 85| 1.4| 1| .7
12| AS 1670 Alert| 79.9| 88.6| 1.5| 1| .G
13 AS1670 Evacuation| 87.1| 93.2| 2.5| 3
14| DIN 33·41)1| 88 .0| 93.5| 2.S| 3
Manufacturer’s details
Manufacture: Anim Electronics S r
Productlon plant: Centobuchl, via DeiLavoralori10
63076 Monleprandone (AP), play
Tel:+390735 705007
Fax:+390735 734912
E-mail: info@nim.biz
Web: www.inm.bz
The persons authorized by the manufacturer repalr or replace the parts of this system, hod author lion to work on Inim Eledronics brand devices only
About this manual
Manual code: DCMIIN1 PESB1011
Revision: 100
Copyright: the information contained in this document the sole properly Anim
Eedronks S r.l No part may be coupled without written authorization from Anim
Elec Ironic S.r.l.All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>