OPCOM OFG010 Refreshing MicroGreen Landscape User Manual
- June 5, 2024
- OPCOM
Table of Contents
OPCOM OFG010 Refreshing MicroGreen Landscape
Quick Manual Guide
Thank you for your interest having Microgreens Dome. Hope you will like it
very much. The Microgreens Dome has the conditions for precision
planting,including light,air,water,etc. From the succulent plants to the
mosses of wetland and aquatic ecology,all that could get sufficient growth
conditions in the intelligent mode without the special care. Its automatic
mode provides the function of photometric sensing,which is quite suitable for
creative placement or hanging in the environment of restaurant, balcony and
indoor garden, and no need to worry about the lack of light at all.
The Microgreens Dome produce fresh air and positive energy every day, as well
as the living environment that changes and projects light and shadow with the
growth of plants. It provides the automatic On / Off mode. In the early
morning, it can be awakened by the Microgreens Dome gradually as the
phototherapy and to start the beautiful day; and at night, it can also help to
fall asleep surrounded by the green landscaping. When several MicroGreen Domes
are hung alternately up and down,the indoor environment soon becomes a 3D
ecological garden immediately with High Color Accuracy up to Ra90 grow light
to display the true color of the garden and flood light. Now,let’s begin the
wonderful planting journey….
Standard Accessories
Hanging set setup: Hanging set can handle weight up to 10kg and Win the 3D Sky Garden Art design around the room.
- Step 1: Fasten the fixing piece to the eiling with screws.
- Step 2: Place the base on the fixing piece.
- Step 3: Use screws to lock the base to the fixing piece.
- Step 4: Insert the transformer in the base.
- Step 5: Plug the USB power cable into the adapter.
- Step 6: Adjust the lanyard to the proper length.
Installation
- Step 1: Place the main device on the terrarium by tightening 3 screws
- Step 2: Plug in the USB cable
- Step 3: Plug USB adapter to AC power outlet
- Step 4: Unplug the stopper from the water port
- Step 5: Use the drop bottle to fill the water into the opening (This step is only for Garden Mode, not recommend for other modes, to maintain the humidity of the moss and ferns)
- Step 6: Drip the water into the glass terrarium
Planting
Control
Main Device Single Button
Remote Control Button
Remark
- Double press to switch On/Off.
- Set up the Wake-up(automatically turns on everyday) and Sleeping(automatically turns off everyday) modes through lighting time setting.
- Wake-up time setting: When light is on, press and hold for 5 seconds until it beeps.
- Sleeping time setting: When light is off, press and hold for 5 seconds until it beeps.
- One short + One long pressing the Timer button resets the product to default settings.
Fan setting
Turns off for 5 minutes/hour for the fan’s maintenance.
Mode setting
G Mode: Dedicated for wet plants (fill the water tank with 80ml of water to circulate moisture within the glass terrarium). S Mode: Dedicated for both Succulent and Aquarium plants (Do Not fill the water tank with water).
Planting Environment Notification
This product is designed for indoor gardening. Without built-in temperature
control, our product works best within a temperature range of 18°C~30°C,
specifically, 25°C. Except for special plants that naturally grow in higher or
lower temperatures, please adjust the air circulating fans once the indoor
temperature exceeds the range to sustain the plants’ growth.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>