urmet 3300-410 Complete Video Surveillance Camera Systems User Guide

: June 13, 2024
: urmet

Table of Contents

Precautions
Technical specifications
Installation specifications
Viewing from Client Software
Documents / Resources

**urmet 3300-410 Complete Video Surveillance Camera Systems User Guide

**

Precautions

Make sure that the device is intact after removing it from the package.
Disconnect the device from the mains before cleaning or maintenance. Do not use spray products to clean the device.
Check that the working temperature is within the indicated range and that the environment is not particularly humid.
If installed in outdoor, don’t expose it to direct rain or high temperatures.
Disconnect power by means of the circuit breaker in the event of a failure and/or bad operation.
The device can only be opened by qualified technical personnel.
Exclusively contact an authorised service centre for repairs.

Technical specifications

Sensor type: 4.0 Megapixel 1/2.7” Color CMOS
Sensitive elements: 2704 pixel (orizzontale) x 1528 pixel (verticale)
Lens: f 3,6 mm
Resolution AHD/TVI/CVI: (AHD)4MP@15/25/30fps add selection 1080P@25/30fps ; (CVI) 4MP@25/30fps add selection 1080P@25/30fps (TVI) 4MP@15/25/30fps add selection 1080P@25/30fps CVBS switch YES PAL/NTSC
IR CUT FILTER: YES
Synchronization: Internal
Shutter control: AUTO
Exposition Mode: Global , BLC , FLC
White balancing: ATW, MWB
Gain control: AUTO
Image Control: Contrast,Sharpness,Color Gain, DNR, Mirror, D-WDR
Sensitivity: 0,03 Lux @(F1.2,AGC ON) – 0 LUX IR ON
LED number: 6
IR Range: 15 m
Power Supply: 12 VCC (+/−10%)
Max consumption: ≤ 5.2W
Connectrs: BNC AHD video signal– Power Jack
Protection grade: IP66
Operating temperature range: -10 / +55°c
Storage temperature range: -40+60°c
Dimensions (Ø x L): 195x66x66 mm
Weight: 300 gr
Sensor type: 4.0 Megapixel 1/2.7” Color CMOS
Sensitive elements: 2704 pixel (orizzontale) x 1528 pixel (verticale)
Lens: AF2.7-12 mm
Resolution AHD/TVI/CVI: (AHD)4MP@15/25/30fps add selection 1080P@25/30fps ; (CVI) 4MP@25/30fps add selection 1080P@25/30fps (TVI) 4MP@15/25/30fps add selection 1080P@25/30fps CVBS switch YES PAL/NTSC
IR CUT FILTER: YES
Synchronization: Internal
Shutter control: AUTO
Exposition Mode: Global , BLC , FLC
White balancing: ATW, MWB
Gain control: AUTO
Image Control: Contrast,Sharpness,Color Gain, DNR, Mirror, D-WDR
Sensitivity: 0,03 Lux @(F1.2,AGC ON) – 0 LUX IR ON
LED number: 6
IR Range: 15 m
Power Supply: 12 VCC (+/−10%)
Max consumption: ≤ 5.2W
Connectors: BNC AHD video signal– Power Jack
Protection grade: IP66
Operating temperature range: -10 / +55°c
Storage temperature range: -40+60°c
Dimensions (Ø x L): 195x66x66 mm
Weight: 280 gr
Overview
Sensor type: 4.0 Megapixel 1/2.7” Color CMOS
Sensitive elements: 2704 pixel (orizzontale) x 1528 pixel (verticale)
Lens: f 3,6 mm
Resolution AHD/TVI/CVI: (AHD)4MP@15/25/30fps add selection 1080P@25/30fps ; (CVI) 4MP@25/30fps add selection 1080P@25/30fps (TVI) 4MP@15/25/30fps add selection 1080P@25/30fps CVBS switch YES PAL/NTSC
IR CUT FILTER: YES
Synchronization: Internal
Shutter control: AUTO
Exposition Mode: Global , BLC , FLC
White balancing: ATW, MWB
Gain control: AUTO
Image Control: Contrast,Sharpness,Color Gain, DNR, Mirror, D-WDR
Sensitivity: 0,03 Lux @(F1.2,AGC ON) – 0 LUX IR ON
LED number: 18
IR Range: 15 m
Power Supply: 12 VCC (+/−10%)
Max consumption: ≤ 5.2W
Connectors: BNC AHD video signal– Power Jack
Protection grade: IP66
Operating temperature range: -10 / +55°c
Storage temperature range: -40+60°c
Dimensions (Ø x L): 105×60 mm
Weight: 260 gr

* Important note: Technical features may be changed without prior notice.

ACCESSORIES PROVIDED

Instruction manual.

*Important note: Accessories may be changed without prior notice

Installation specifications

Avoid pointing the lens directly towards the sun or intense sources of light also when the camera is off. The subject must not bebacklight.
Do not point the camera towardsreflecting objects.
Some lighting systems(e.g. coloured fluorescent lights) may false the colours.
Arrange a suitable circuit breaker and fuse upstream of the devices.
Make sure that the rating plate data correspond to the power specifications before connecting the device to the mains.

INSTALLATION

Make sure that no units are powered before starting the installation procedure.
In the case of mini-cameras, position the bracket in order to point the camera to the direction useful to capture images; it is possible to adjust the camera on HORIZONTAL, VERTICAL and TRANSVERSAL axes.

In the case of the minidome, rotate the body of the minidome for the chosen shot.

ADJUSTMENTS

Loosen the locking ring on the bracket and the screw
Position the bracket on horizontal, vertical and transversal axes point the camera in the desired direction.
Once made, firmly block.
Important note: In order to avoid serious damages to the connection cable, avoid rotating repeatedly and excessively the camera fixed to the bracket.
Connect the video output to the utility.
Power the camera.

CONFIGURATION

The camera may be configurated only using the UTC controls available on the DVR/HVR of the Urmet catalogue that provide them. These controls can be useed to access the OSD menu.

The menu access/configuration is also possible pressing/moving the middle joystick button on the camera cable.
Installation

USING THE MENU

The camera uses a multi-level menu that allows you to enable/disable or change settings.
Once the menu access command is given, the OSD menu will appear on the monitor.
Using the arrow keys, navigate through the menus and select your preferred options.
The or symbol indicates that by selecting the item associated with it you will access a subsequent submenu in which you can make further changes.
To confirm the changes made and exit the menus or submenus, select the SAVE- EXIT item and press the middle button.
To restore the factory setting, select EXIT and press the middle button.

VIDEO OUTPUT Quick SELECTION

The camera has the possibility to use 4 different video outputs, always on the same BNC connector.
Pressing the joystick for a few seconds (without pressing it in centre, so without entering into the OSD menu) selects the video output:

UP: High definition video output AHD (Analog High Definition) 4MP 15 fps
DOWN: High Definition video output AHD (Analog High Definition) 4MP 25fps
LEFT: High Definition video output AHD (Analog High Definition) 2MP 25fps
RIGHT: CVBS standard interlaced video output

OPERATING FEATURES

IR LED operation
The device is provided with a CDS sensor that switches the IR LEDs on when the light is approximately 5 Lux.

Viewing from Client Software

You can also simultaneously connect to one or more NVRs with the URMET UVS client software included in the CD provided with the product. The URMET UVS software is available in two versions: for Windows and for the Mac OS version 10.8.0 or higher.
For details on installing and using the URMET UVS client software, see the full manual on the provided CD or on the Urmet website.

DIRECTIVE 2012/19/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 4 July 2012 on waste electrical and electronic equipment (WEEE).
The crossed-out wheeled bin symbol on the product or on its packaging indicates that the product must not be disposed of together with ordinary household waste.
The user must therefore dispose of the waste equipment by taking it to a designated collection centre for the recycling of waste electrical and electronic equipment. As an alternative to independent disposal, you can hand in the equipment you wish to dispose of to the retailer when purchasing a new appliance of the same type. Electronic products up to 25 cm in size can also be handed in for free disposal, with no purchase obligation, at electronics stores with sales areas of over 400 m2.
Adequate separate collection for recycling, treatment and environmentally friendly disposal of the scrapped equipment helps to prevent negative impacts on the environment and on human health, and promotes recycling and/or reuse of the materials with which the equipment is made.

QR Code

3300/401

3300/410

3300/500

Customer Care
Italia: 011 23 39 810
Export Dept.: +39 011 24 00 250/256

URMET S.p.A.
Via Bologna, 188/C | 10154 Torino (ITALY)
www.urmet.com
info@urmet.com

MADE IN CHINA
IF YOU LOVE YOUR BUILDING

urmet Logo

Documents / Resources

| urmet 3300-410 Complete Video Surveillance Camera Systems [pdf] User Guide
3300-410, 3300-401, 3300-500, 3300-410 Complete Video Surveillance Camera Systems, 3300-410, Complete Video Surveillance Camera Systems, Surveillance Camera Systems, Camera Systems, Systems
---|---