HALO IB51816521ML XACT Beam Mid Stem LED Light Instructions
- June 13, 2024
- HALO
Table of Contents
IB51816521ML
Installation Instructions for L809, LJ809, LL809 Series Fixtures
IMPORTANT SAFETY INSTRUCTIONS
-
Read carefully for your protection and save all instructions.
-
Wear rubber-soled shoes and work on a sturdy ladder.
-
This fixture must be installed according to the National Electric Code and local building codes.
-
To avoid a hazard to children, account for all parts and destroy all packing materials.
-
Do not install in damp or wet locations.
-
Do not install luminaire assembly closer than 6 inches from any curtain or similar combustible material.
-
For use on ceiling mount only. NOT for use on a vertically mounted track.
-
Risk for Fire or Electric Shock
Keep away from flammable vapors or materials.
Please consult an electrician for installation if uncertain of luminaire electrical systems. -
Risk of Electric Shock
To avoid possible electrical shock, be sure that power supply is turned off at fuse box or circuit breaker before installing or servicing fixture.
To reduce the risk of fire and electrical shock, use only fixtures and fittings intended for use with “L” series 120V HALO Track. -
Risk of Burn
Disconnect power and allow fixture to cool before handling fixture
TO INSTALL UNIT ON TRACK
- Locate the CONNECTOR GROUND CONTACT and CONNECTOR NEUTRAL CONTACT on LED fixture adapter and TRACK POLARITY LINE on track. See Figure 1 and 2 respectively.
- Hold the LED track fixture body securely. See Figure 3. Move the CONTACT HEAD into track. See Figure 4.
- Twist adapter approximately 1/4 turn (90°) until it locks into track opening. CONNECTOR GROUND CONTACT and CONNECTOR NEUTRAL CONTACT on adapter need to align with TRACK GROUND CONTACT, and TRACK NEUTRAL CONTACT respectively. The CONNECTOR GROUND and NEUTRAL CONTACTS should also be aligned with the TRACK POLARITY LINE. (Refer to Figure 1 and 2).
Note: Forcing the mounting adapter in the wrong direction may damage the
contact assembly. If mounting adapter will not turn easily, twist adapter in
the opposite direction.
Note: DO NOT touch the TRACK CONTACTS directly as they could cause
electrical shock.
TO REMOVE UNIT FROM TRACK
Note: Allow unit to cool before removing from track.
- Holding the LED track fixture body securely, pull the latch on the adaptor housing downward. Now, twist adapter approximately 1/4 turn(90°). The outer connector housing locking tabs should be outside the track opening.
- Remove fixture from track.
TO AIM THE LED FIXTURE TO THE
DESIRED LOCATION
- After LED fixture is installed on the track, the track head can be rotated 340° and tilted 100° from the vertical (downward) position in order to adjust the fixture to the desired illuminating position (Figure 5).
5-YEAR LIMITED WARRANTY
THE FOLLOWING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES,
WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING, BUT NOT LIMITED TO, ANY
WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
Cooper Lighting Solutions warrants to customers that, for a period of five
years from the date of purchase, Halo LED series products will be free from
defects in materials and workmanship. The obligation of Cooper Lighting
Solutions under this warranty is expressly limited to the provision of
replacement products. This warranty is extended only to the original purchaser
of the product. A purchaser’s receipt or other proof of date of original
purchase acceptable to Cooper Lighting Solutions is required before warranty
performance shall be rendered.
THIS WARRANTY DOES NOT APPLY TO COOPER LIGHTING SOLUTIONS PRODUCTS THAT HAVE
BEEN ALTERED OR REPAIRED OR THAT HAVE BEEN SUBJECTED TO NEGLECT, ABUSE, MISUSE
OR ACCIDENT (INCLUDING SHIPPING DAMAGES). THIS WARRANTY DOES NOT APPLY TO
PRODUCTS NOT MANUFACTURED BY COOPER LIGHTING SOLUTIONS WHICH HAVE BEEN
SUPPLIED, INSTALLED, AND/OR USED IN CONJUNCTION WITH COOPER LIGHTING
SOLUTIONS PRODUCTS. DAMAGE TO THE PRODUCT CAUSED BY REPLACEMENT BULBS OR
CORROSION OR DISCOLORATION OF BRASS COMPONENTS ARE NOT COVERED BY THIS
WARRANTY.
LIMITATION OF LIABILITY:
IN NO EVENT SHALL COOPER LIGHTING SOLUTIONS BE LI- ABLE FOR SPECIAL, INDIRECT,
INCIDENTAL, OR CONSEQUEN- TIAL DAMAGES (REGARDLESS OF THE FORM OF ACTION,
WHETHER IN CONTRACT, STRICT LIABILITY, OR IN TORT IN- CLUDING NEGLIGENCE), NOR
FOR LOST PROFITS; NOR SHALL THE LIABILITY OF COOPER LIGHTING SOLUTIONS FOR
ANY CLAIMS OR DAMAGE ARISING OUT OF OR CONNECTED WITH THESE TERMS OR THE
MANUFACTURE, SALE, DELIVERY, USE, MAINTENANCE, REPAIR OR MODIFICATION OF
COOPER LIGHTING SOLUTIONS PRODUCTS, OR SUPPLY OF ANY REPLACEMENT PARTS
THEREFORE, EXCEED THE PURCHASE PRICE OF COOPER LIGHTING SOLUTIONS PRODUCTS
GIVING RISE TO A CLAIM. NO LABOR CHARGES WILL BE ACCEPTED TO REMOVE OR INSTALL
FIXTURES.
All returned products must be accompanied by a Return Goods Authorization
Number issued by the Company and must be returned freight prepaid. Any product
received without a Return Goods Authorization Number from the Company will be
refused.
Cooper Lighting Solutions is not responsible for merchandise damaged in
transit. Repaired or replaced products shall be subject to the terms of this
warranty and are inspected when packed. Evident or concealed damage that is
made in transit should be reported at once to the carrier making the delivery
and a claim filed with them. Reproductions of this document without prior
written approval of Cooper Lighting Solutions are strictly prohibited.
Cooper Lighting Solutions
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
Canada Sales
5925 McLaughlin Road
Mississauga, Ontario L5R 1B8
P: 905-501-3000
F: 905-501-3172
© 2022 Cooper Lighting Solutions
All Rights Reserved
Printed in China
Publication No. IB51816521ML
Cooper Lighting Solutions is a registered trademark.
All trademarks are property of their respective owners.
Product availability, specifications, and compliances are subject to change
without notice
Installation Instructions for L809, LJ809, LL809 Series Fixtures
www.halolighting.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>