Yi YHS5020 Dome Camera U User Manual

Yi YHS5020 Dome Camera U

Thank you for choosing the YI Dome Camera U

What’s in the box

Getting to Know Your Camera

Pairing your camera

Powering on the Camera

• Place the camera close to the router, and make sure Wi-Fi access is available, then connect the cable to the Micro US B port on the back of the camera to power the outlet as shown.
• The camera indicator will flash yellow and you will hear the introductory messages “Welcome to YI Home Camera”, followed by “Waiting to connect”.

Connecting to the YI Home App

Step 1

• Download the YI Home App and register a YI Home account.

Step2

1. Ensure that your cell phone is connected to your local 2.4GHz Wi-Fi network.
2. Enable the “Location” function on your phone.
3. Authorize the “Location” function of the YI Home app.

Step3

• Log/in into your YI Home App, tap the “+” symbol in the top-right, select the “YI Dome Camera U” and then tap the “I heard ‘Waiting to connect”‘ button.

Step4

• Enter your Wi-Fi network password and tap the “Please choose Wi-Fi” button.
• A QR code will appear on your phone’s screen. Point the QR code towards the camera lens until you hear the following messages “QR code is successful, connecting to Wi-Fi” and ‘Wi-Fi is connected”.

Step5

• Tap the “Next” button. You will hear the message “Pairing is successful, you can start using your camera now” both from the camera and from the app.
• Assign your desired name to the camera and tap the buttons “Save” and ”You may start using your camera now”.
• Your YI Dome Camera U is now ready to use.

Pan/Tilt/Zoom (PTZ) Angle

• Range of Activity: Pan 0° – 350°, tilt up 53°, tilt down 10°.

Zoom

• Directly from the livefeed on your YI Home App

Wall Mounting Diagram

Wall Mounting Diagram (optional)

• Use the screws to install the wall mount on a flat wall/ ceiling. Install the camera onto the wall mount.
• Connect the power cable to the camera and switch it on. The camera will automatically connect the last configured Wi-Fi network.

Switching Wi-Fi Networks

When you need to switch Wi-Fi networks or update your Wi-Fi password, follow the instructions below:

1. Restore your camera to its default settings by inserting a paper clip or reset pin into the camera’s Reset Port.
2. Open the YI Home app on your phone, and connect the camera to your phone again. Your videos stored on your MicroSD card will not be affected.

Important Safety Guidelines

1. Read these instructions carefully.
2. Clean only with a dry doth.
3. This camera is for indoor use only.
4. Only use the attachments/ accessories specified by the manufacturer.
5. Unplug this apparatus during lightning storms or when unused for long periods of time.
6. To get the best usage out of this product, please consistently update to the latest versions of our app and firmware.

Go to: https://www.yitechnology.com/firmware/

Specifications

• Maximum Resolution: 2304 x 1296
• Lens: Wide-Angle
• Audio: Built-in Mic and Speaker
• Photographic Enhancement: 3D Digital Noise Reduction, Distortion Correction
• Wi-Fi: 802. 11b/g/n, 2.4 GHz
• Alert Modes: Human Detection, Motion Detection
• Night Vision: IR Cut+ Non-invasive Infrared LEDs
• Support Platforms: Android, iOS, Mac & PC
• Wireless Encryption: WEP/WPA/WPA2
• USB Cable Length: 2 Meters
• Power Supply: DC 5V/1A
• Power Consumption: 3.5W
• Pan/Tilt: 350° horizontally, tilt up 53°, tilt down 1o°.
• Storage: MicroSD Card and YI Cloud Storage
• Operating Temperature: 14°F to 122°F

IC WARNING

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device

The distance between user and products should be no less than 20cm.

CONTACT

Hereby we: Shanghai Xiaoyi Technology Co., Ltd. declares that the radio equipment: YHS.5020 is in compliance with Directive 2014/53/EU.

• Product Type: YHS.5020
• Wi-Fi: 2.4GHz,802.11 b/g/n
• Max RF power: 17dBm
• Manufacturer: Shanghai Xiaoyi Technology Co., Ltd.
• Address: Building 18, NO.55 Chuanhe Road, Pudong New District, Shanghai, China
• The full text of the EU declaration of conformity is available at the following internet address: https://kamistore.eu/pages/product-certification
• Manufacturer: Shanghai Xiaoyi Technology Co.,Ltd.
• Address: Building 18, N0.55 Chuanhe Road, Shanghai, China
• www.yitechnology.com
• forum.yitechnology.com
• Email: support@yitechnology.com
• https://www.yilechnology.com/cms/privacy

References

• Kami Community - Official Kami Community. Ask questions, get answers and connect with your fellow Kami users.
• YI Technology
• YI Technology

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>