George Kovacs 2925555 1 Light Xenon Wall Sconce in Bronze Instruction Manual
- June 13, 2024
- GEORGE KOVACS
Table of Contents
George Kovacs 2925555 1 Light Xenon Wall Sconce in Bronze
Product Information
The product is a fixture that requires installation and wiring. It comes with a mounting plate, fixture body, shade, and screws. The fixture has black or smooth wires, white or ribbed wires, and green or bare copper wires for grounding. It is important to note that the illustration in the manual may not be identical to the actual fixture purchased.
Product Usage Instructions
- Before starting the installation process, make sure to shut off the power at the circuit breaker or fuse.
- Remove the old fixture, including the mounting hardware.
- Take out the new fixture from the carton and ensure that all parts are included.
- Attach the mounting plate to the junction box using the provided mounting screws.
- Connect the electrical wires according to the diagram in Fig. 2. Make sure all wire connectors are secured. If your outlet box has a ground wire, connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to the mounting plate using the green screw provided.
- Align the fixture body to the back plate and secure them together with screws.
- Place the shade over the socket and ensure it is level horizontally.
- Install light bulbs that comply with the fixture’s specifications. Do not exceed the maximum wattage rating.
- Once the installation is complete, restore power and test the fixture.
Note : It is recommended to have a qualified electrician install the fixture to ensure proper wiring and installation.
INSTALLATION INSTRUCTIONS
WARNING! SHUT THE POWER OFF AT THE FUSE OR CIRCUIT BREAKER.
MOUNTING THE FIXTURE
(Fig.1)
- Shut off the power at the circuit breaker and remove the old fixture, including the mounting hardware.
- Carefully remove the fixture from the carton and check that all parts are included as shown in the illustration.
- Attach mounting plate (A) to the junction box with mounting screws (B) (Size: #8-32N*L0.5”).
CONNECTING THE WIRES
(Fig. 2)
- Connect the electrical wires as shown in Fig. 2, making sure that all wire connectors are secured. If your outlet box has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to the mounting plate using the green screw provided.
FINISHING THE INSTALLATION
(Fig.1)
- Align fixture body (D) to back plate (A) and secure with screws (C).
- Place shade (E) over the socket and level horizontally.
- Install light bulbs in accordance with fixture specifications, (DO NOT EXCEED THE MAXIMUM WATTAGE RATING!) (NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE!).
Your installation is now complete. Return power and test the fixture.
Note : The illustration (Fig.1) in this manual is for installation purposes only. It may or may not be identical to the fixture purchased.
IMPORTANT : THE FIXTURE SHOULD BE INSTALLED BY A QUALIFIED ELECTRICIAN TO ENSURE PROPER WIRING AND INSTALLATION.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>