GEORGE KOVACS P305-5-654-L Floor Lamp Installation Guide
- October 30, 2023
- GEORGE KOVACS
Table of Contents
GEORGE KOVACS P305-5-654-L Floor Lamp
Product Information
The Floor Lamp Model# P305-5-654-L is a touch dimmer switch lamp with 3 different brightness settings that can be adjusted as per your preference. The lamp has a maximum wattage rating which should not be exceeded. The lamp comes with spring washers and fallen screws for easy installation. The lamp is made in China.
IMPORTANT SAFETY INSTRUCTIONS
- Never use with an extension cord unless the plug can be fully inserted.
- Do not change or alter.
WARNING:
- Risk of shock, do not plug in the unit before assembly is complete.
- Do not exceed the maximum wattage rating.
- Before turning on, please follow the instruction manual step by step.
INSTALLATION
- Carefully unpack your new lamp and place all parts on a smooth, flat surface to protect the finish until ready to install.
- Align lamp body (C) onto base (D). Secure lamp body (C) onto base (D) with spring washers (E) followed by allen screws (F) via allen wrench (G).
- Connect the power adapter (A) to connector (B).
- Plug into power outlet and test your new fixture. Adjust the arm location as desired.
- This lamp uses a touch dimmer switch with 3 different brightness settings:
- 1st touch: On/Low brightness
- 2nd touch: Medium brightness
- 3rd touch: Max brightness
- 4th touch: Off
IMPORTANT: FIXTURE SHOULD BE INSTALLED BY A QUALIFIED ELECTRICIAN TO ENSURE PROPER WIRING AND INSTALLATION.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>