Kruger Matz KM0807 8 Inch Tablet Eagle Owner’s Manual
- June 13, 2024
- Kruger Matz
Table of Contents
Kruger Matz KM0807 8 Inch Tablet Eagle
Product Information
- Product Name: 8 Tablet Eagle KM0807
- Owner’s Manual Languages: English, German, Romanian, Polish
- Disclaimer: All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means, without the prior written permission of the producer of this product. Please note that illustrations and descriptions concerning the operating system are for reference only and may vary from the actual software on your device. The producer reserves the rights to errors and misprints.
- Safety Instructions: Read the instruction manual carefully before first use and keep it for future reference.
- Overheating: While charging, the temperature of the device and the charger may increase. This is within the normal range of operation and does not affect the device’s lifespan or performance. However, if there is an excessive increase in temperature or overheating, take the following steps: disconnect the charger from the device, close any running apps, wait for the device to cool down, and then begin charging the device again. If the USB port area overheats, check for damage to the connected USB cable and replace it if necessary. During usage, if the device overheats, close any running apps, disconnect any connectivity (Bluetooth, Wi-Fi, data transfer), lower the screen brightness settings, and wait for the device to cool down before using it again.
- Safety Precautions: To maintain battery longevity and avoid overheating, do not use/store the device in very hot or cold environments or expose it to moisture, humidity, water, or any other liquids. Keep the device away from direct sunlight and sources of heat.
Product Usage Instructions
- To turn on the device, tap and swipe upwards to unlock.
- To turn off the device, press and hold the power button.
- To lock/unlock the screen (sleep mode), briefly press the power button.
- To enter power-saving mode, refer to the user manual for specific instructions.
- For more information and detailed usage instructions, please refer to the owner’s manual available in multiple languages.
Disclaimer
All rights reserved. No part of this manual may be reproduced or transmitted
in any form or by any means, without the prior written permission of the
producer of this product.
Please note: illustrations and descriptions concerning operating system
are for reference only, and may vary from actual software on your device!
Producer reserves the rights to errors and misprints.
Safety Instructions
Read the instruction manual carefully before first use and keep it for future reference.
- Protect this product from moisture, humidity, water and any other liquid. Avoid using/storing it in extreme temperatures. Do not expose it to direct sunlight and sources of heat.
- Avoid using/storing it in the strong magnetic environment.
- Never use this device if the power adapter or the device itself is damaged.
- Disconnect the device from the power supply if it is not going to be used for a long time.
- Use only authorized accessories.
- Prevent the device from falling on the ground or being strongly impacted.
- This product is not a toy; keep it beyond children’s reach.
- Producer does not claim liability for any data loss, damage caused by inappropriate use and handling or any mechanical damage.
- Do not attempt to repair/disassemble this device yourself. In case of damage, contact with an authorized service point for check-up/repair.
- ALWAYS disconnect this device from power supply mains before cleaning. Clean this device with soft, slightly damp cloth. Do not use any abrasives or chemical agents to clean this product.
- Do not disconnect the tablet suddenly when formatting or uploading and downloading, which can lead to program errors.
- Producer does not claim liability to any damages caused by inappropriate upgrade performed by the user.
- Road safety comes first: Do not use this device while driving or walking.
- Switch off in aircraft: Wireless devices can cause interference in aircraft. Please make sure that your device is powered off (or switched to flight mode) during flight.
- Switch off before entering risky areas: Strictly observe the relevant laws, codes, and regulations on the use of wireless devices in risky areas. Turn off your device before entering a place susceptible to explosion, such as an oil station, oil tank, chemical plant or a place where a blasting process is under way.
- Observe all special regulations: Follow any special regulations in force in any area such as hospitals and always switch off your device whenever it is forbidden to use it or, when it may cause interference or danger. Properly use your device near medical apparatuses, such as pacemakers, hearing aids and some other electronic medical devices, as it may cause interference to such apparatuses.
- NOTE: The battery is not detachable. Do not attempt to disassemble the battery.
Overheating
While charging, the temperature of the device and the charger may get
increased. This does not affect the device’s lifespan or performance and is in
the device’s normal range of operation.
However, if there is an excessive increase in temperature or overheating,
depending on the factor that caused it: device’s performance may be
significantly reduced, charging process may be stopped, the device may turn off
or display notification about switching off for cooling. Function available
only in selected models. Important: if the device displays notification about
overheat, turn it off and do not turn it back on until completely cooled down!
In case of overheat during charging:
- Disconnect the charger from the device.
- Close any running apps.
- Wait for the device to cool down, and then begin charging the device again. If the part of the device where the USB port is placed overheats, check for damage to the connected USB cable. Replace the damaged USB cable with a new authorized cable.
The device may also overheat during operation when using several battery
consuming applications or functions.
In case of overheat during usage:
- Close any running apps.
- Disconnect any connectivity (Bluetooth, Wi-Fi, data transfer etc.).
- Lower the screen brightness settings.
- Wait for the device to cool down before attempting to use it again.
Safety precautions concerning operation environment
In order to maintain battery’s longevity, and to avoid overheat, follow basic
precautions including provisions listed below:
- Do not use / store the device in very hot or cold environments nor expose to direct sunlight (e.g. on a car’s dashboard when using as a navigation).
- Do not place the device on surfaces that may cause overheat e.g. electric heating mat.
- Do not place near sources of heat e.g. radiators, microwave ovens, hot kitchen appliances nor high pressure containers.
- DO NOT use damaged charger or battery!
- Use only authorized chargers, batteries and cables! Using unauthorized accessories may damage the device or battery. Connecting charger with inadequate parameters may result with damage to the device and poses risk to the user.
Keys and functions
- Power and lock key
- Volume control button
- Earphone jack
- Microphone
- USB type C (charging)
- Nano SIM slot / microSD card slot
- Rear camera
- Front camera
- Speaker
Getting started
To eject the card tray, insert card tray pin into card tray hole and push
lightly until the card tray pops up.
Retrieve the card tray and insert the nano SIM card and nano SIM card OR nano
SIM card and microSD card as indicated.
Close the card tray.
Turn on
To switch on your tablet, press and hold the power key and wait until it
starts. The device will start with locked screen:
- Tap and drag the icon upwards to unlock.
- Touch the upper edge of the screen and drag downwards to open quick settings.
Turn off
To power off your tablet, press and hold the power key until the pop- up
window appears; tap “Power off” to power it off.
Lock/unlock the screen (sleep mode)
To save battery, you should put your tablet in sleep mode by turning off the
LCD display. To do this, shortly press the power key . Press it again to wake
up the screen.
Conserving energy
- Deactivate the Wi-Fi function when it is not in use.
- Keep the device connected to power mains only until it is fully charged.
- Reduce the display brightness in the unit settings.
- Switch to standby mode/turn it off when the device is not in use.
Learn more
For more information on this device visit:
www.krugermatz.com. | Read owner’s manual
carefully before using your device. | Visit
www.krugermatz.com website for more products and
accessories. | In case of any doubts or questions reach out to our Frequently
Asked Questions section.
Please note: below illustrations and descriptions concerning operating
system are for reference only, and may vary from actual software on your
device!
IMPORTANT: The producer allows the possibility for minor variations in
display brightness and color between individual devices. There may be visible
light or dark spots on the display. Up to 5 defective pixels are acceptable to
be present on the display of the device. Above mentioned cases concerning
device’s display are not covered under warranty nor statutory warranty rights.
Lechpol Electronics Sp. z o.o. Sp.k. hereby declares that tablet KM0807 is
consistent with directive 2014/53/UE. Full text of the EU Declaration of
Conformity is available at following Internet address:
www.lechpol.pl.
Correct Disposal of This Product (Waste Electrical & Electronic
Equipment)
(Applicable in the European Union and other European countries with separate
collection systems) This marking shown on the product or Its literature,
indicates that It should not be disposed with other household wastes at the
end of its working life. To prevent possible harm lo the environment or human
health from uncontrolled waste disposal, please separate this from other types
of wastes and recycle it responsibly to promote the sustainable reuse of
material resources. Household users should contact either the retailer where
they purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract This product should not be mixed with
other commercial wastes for disposal.
Made in China for Lechpol Electronics Leszek Sp.k., ul. Garwolińska 1, 08-400
Miętne.
www.krugermatz.com
is a registered trademark