tala KLT-640-2200K-SB-PD-01 Kilter Pendant Light Installation Guide
- June 13, 2024
- TALA
Table of Contents
Installation Guide
**KILTER PENDANT
**
The creators of beautiful, sustainable lighting.
Discover the full Tala family at us.tala.co.uk
BEFORE STARTING
We advise the fitting of our ceiling rose and pendant to be performed by a qualified electrician. Please read through these instructions before commencing work, and keep them for future reference. Please take extreme care when carrying out these instructions.
IMPORTANT
This light fitting must be connected to the supply earth.
If your lighting circuit does not have an earth, ask a qualified electrician
to provide an earth facility. This light fitting is suitable for indoor use
only. This fitting operates on 120V mains voltage. Please visit our website to
see our recommended dimmers.
CARE AND CLEANING
We recommend cleaning with a soft dry cloth.
Do not use abrasive materials as these will damage the finish of the product.
Do not use alcohol or other solvents.
WARRANTY AND AFTER-CARE
This product has a two-year warranty. If there appears to be a functional
defect with the product during this time, please contact our team at
customerservice@tala.co.uk.
WARNING
Always switch off electricity supply at the mains during installation and
maintenance. We recommend that the fuse is withdrawn or the circuit breaker is
switched off whilst work is in progress. Do not just turn off at the wall
switch.
All fittings must be installed in accordance with current NFPA 70, National
Electrical Code (NEC).
RECOMMENDED EQUIPMENT
- Small flat head screwdriver
- Wire strippers
- Insulation tape
Further equipment may be required to install fixture to ceiling.
FOR INDOOR USE ONLY
SKU – KLT-640-2200K-SB-PD-01-US
SKU – KLT-640-2200K-DG-PD-01-US
SKU – KLT-640-2700K-SB-PD-01-US
SKU – KLT-640-2700K-DG-PD-01-US
Kilter Pendant Light – Provided Components
| A x1 Ceiling bracket | F x1 Tala Kilter bulb |
|---|---|
| B x1 Ceiling plate | G x2 Flat head bolts |
| C x1 Power cable | H x3 Connectors |
| D x1 Support cable | IScrews and rawl plugs |
| E x1 Pendant |
STEP 1
Attach A to the ceiling using screws and plugs.
Always choose screws and plugs that are appropriate for the ceiling.
STEP 2
Loosen the grub screw 1 and adjust the power cable C and support cable D to
your desired length and trim if necessary.
The support cable D is clearly marked and should not be used for electrical
connection.
Using a flat head screw driver, tighten grub screw 1 . This will secure the
cable in place. Maintain all double insulation.
STEP 3
First identify your household wiring using current Building Regulations and
IEE Wiring Regulations.
Attach the pendant wiring to your household supply as shown through the Power
Cable C . Use appropriate junction box / connectors
The Support Cable is clearly marked and should not be used for electrical
connection.
STEP 4
Fasten part A to part B using the bolts provided E .
At this stage, final adjustments can be made to the suspension cord and
electrical cable length.
STEP 5
Insert the bulb into the lampholder, an audible click will confirm it is
correctly in place.
The bulb needs to be firmly connected to the fitting to ensure electrical
contact is made.
Join the Community
Instagram: @tala | Facebook: talaHQ | Pinterest: TalaLED | Tag:
lighttoliveby
Tala Studios, 25B Vyner Street, London E2 9DG
|hello@tala.co.uk
Tala North America Inc. 909 Rose Avenue, Suite 660, North Bethesda, MD
20852
Documents / Resources
| tala
KLT-640-2200K-SB-PD-01 Kilter Pendant
Light
[pdf] Installation Guide
KLT-640-2200K-SB-PD-01 Kilter Pendant Light, KLT-640-2200K-SB-PD-01, Kilter
Pendant Light, Pendant Light, Light
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>